Results 1 to 4 of 4

Thread: On Line Belt Rip Detection

  1. #1
    Jimmy Hadinata Guest
    Posted by Jimmy Hadinata on December 21, 1999 at 23:00:41:

    We are looking for "on-line" belt rip detection unit.

    This unit must also capable of detection rip on steel cord belt. When the belt rip, sometime the belt become 2 pieces, but sometime, the belt overlapping and the there is no spillage to activate any kind of sensor.

    Can anyone recommend which product suit this application.

  2. #2
    Dave Miller Guest

    Re: On Line belt rip detection

    Posted by Dave Miller on May 08, 2000 at 23:14:41:

    In Reply to: On Line belt rip detection posted by Jimmy Hadinata on December 21, 1999 at 23:00:41:

    There are a number of quality rip detectors on the market. Both Richwood Industries and Arch Environmental have systems available in the US, which do not require the installation of wands or wires in the belt for sensors to read.

    The use of sensors is the most sophisticated method of rip detection and there are a number of choices.

    In order to advise you, I would need specific information on your belt lines.

    You may contact me via E-mail at or via telephone at +1 330 494 1704 if you require more information.

    Dave Miller
    ADM Consulting

  3. On line belt rip detection

    Dear Mr. Jimmy,
    GOOD YEAR , they make belt with rip sensor embeded to it. I know another method using cross wire to sence any tear in the belt along with the sensor.

  4. #4
    jcoldiron Guest

    Rip Detection

    All large steel cord manufactures offer retro fit of thier sensors into existing belting. A couple of points to consider though is...
    1) total length of belting and required number of sensors. The generally accepted distance between sensors is 250ft. For long overland conveyors this could be expensive. For shorter belts the increment is usually around 100ft.
    2) Age of the belting to be installed in. Obviously a belt with a long projected life span would be desired, however old belts subjected to the elements will show signs of aging i.e. cover hardness increases, and could create problems with an retro-fit, with regards to the covers bonding during the installation.

Similar Threads

  1. Belt Rip Detection with Tube Conveyor Belts
    By Roland Heilmann in forum Pipe Belt Conveying
    Replies: 11
    Last Post: 19th June 2015, 7:42
  2. Belt Rip Detection
    By dectecau in forum Trough Belt Conveying
    Replies: 2
    Last Post: 11th April 2012, 1:24
  3. Belt Fire Detection
    By Integrasa in forum Fire & Explosion Protection, ATEX
    Replies: 1
    Last Post: 3rd May 2010, 22:28
  4. Online Detection of Longitudinal Belt Cut
    By mahesh in forum Trough Belt Conveying
    Replies: 8
    Last Post: 17th May 2005, 0:06
  5. Online Detection of Belt Cut
    By mahesh in forum Trough Belt Conveying
    Replies: 12
    Last Post: 13th January 2005, 5:36

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Single Sign On provided by vBSSO