Results 1 to 2 of 2

Thread: Detergent Slurry Pump

  1. Detergent Slurry Pumps

    I need Detergent Slurry Spray pump with discharge pressure to 70 to 75 Bars with Capacity 4 yo 5 Cu.M/Hr. Complete with drive.
    Help is needed for offer or name of Pump manufacturer who can quote for this application.
    Regards
    M. N. Ahmed
    Unico Syndicate
    1/11 Arakay Square - First Floor
    Shahrah-e-Liaquat, New Challi
    Karachi-74000, Pakistan.
    Tele: 2423266, 2429526
    Fax: 92-21-2416078. E-mail: unico.syndicate@attglobal.net
    Em(P): mumtaz_nadeem.ahmed@attglobal.net

  2. Quote Originally Posted by N. Ahmed View Post
    I need Detergent Slurry Spray pump with discharge pressure to 70 to 75 Bars with Capacity 4 yo 5 Cu.M/Hr. Complete with drive.
    Help is needed for offer or name of Pump manufacturer who can quote for this application.
    Regards
    M. N. Ahmed
    Unico Syndicate
    1/11 Arakay Square - First Floor
    Shahrah-e-Liaquat, New Challi
    Karachi-74000, Pakistan.
    Tele: 2423266, 2429526
    Fax: 92-21-2416078. E-mail: unico.syndicate@attglobal.net
    Em(P): mumtaz_nadeem.ahmed@attglobal.net
    Tobee® TH Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling highly abrasive,high density slurries.

    SPECIFICATIONS:

    Size: 1" to 22"
    Capacity: 3.6-5400 m3/h
    Head: 6-125 m
    Handing solids: 0-130mm
    Concentration: 0%-70%
    Materials: Hyper chrome alloy, Rubber, Polyurethane, Ceramic, Stainless steel etc.

    Design Features:

    • Horizontal,Cantilevered,Centrifugal,Single stage slurry pump design.
    • Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
    • Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
    • Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
    • Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer
    • Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
    • Shaft seal - Packing seal,Centrifugal seal,Mechanical seal;
    • Driving type - Flexible coupling,V-belt with pulleys,Gearbox,VFD,SCR control etc.
    • The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
    • Easy to install and maintain in on-site application.
    http://www.tobeepump.com/slurry-pumps/

Similar Threads

  1. Used Pump IBAU Size 1B-D 350 Screw Pump, 350 TPH,2001
    By davef@damac.co.uk in forum Used & Refurbished Equipment
    Replies: 0
    Last Post: 8th March 2017, 12:22
  2. Slurry Pump & Particle Size
    By BabakHoudeh in forum Hydraulic Conveying
    Replies: 3
    Last Post: 8th January 2014, 17:22
  3. Centrifugal Slurry Pump Required
    By D.R. Kaushal in forum Hydraulic Conveying
    Replies: 6
    Last Post: 26th April 2006, 15:01
  4. Slurry Pump System
    By Author in forum New Products, New Orders
    Replies: 0
    Last Post: 7th April 2006, 20:31
  5. Detergent Powder Project
    By lvjrf in forum General Aspects
    Replies: 2
    Last Post: 13th February 2006, 11:56

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO