Results 1 to 2 of 2

Thread: China Warman Slurry Pump Manufacturer

  1. China Warman Slurry Pump Manufacturer

    Tobee® TH Slurry pumps are interchangeable with world’s standard Warman AH slurry pumps for heavy duties, A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications. The TH slurry pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. These horizontal slurry pumps are designed for hyper heavy duty applications such as mill discharge, process plant, coal washing, dregding sands, tailings and high pressure pipelines, as well as other specialty applications.

    SPECIFICATIONS:

    Size: 1" to 22"
    Capacity: 3.6-5400m3/h
    Head: 6-125m
    Handing solids: 0-130mm
    Max.pressure: 2020 kPa
    Materials: Hyper chrome alloy, Rubber, Polyurethane, Ceramic, Stainless steel etc.

    Design Features:

    • Bearing assembly - a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
    • Liners - easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
    • Elastomer seal rings back all liner joints.
    • Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
    • Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
    • Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
    • Throatbush - wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
    • One-piece frame - a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.
    • An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance

    Typical:

    Mining & Mineral Processing
    The slow running speeds of the Tobee TH Heavy Duty Slurry Pump, together with the comprehensive choice of abrasion resistant alloys and elastomers, provide unrivalled performance and service life for all abrasive mining and minerals processing applications.

    Chemical Process
    The interchangeability of alloy and elastomer components in the same pump casing, together with a wide range of mechanical seals, make the Tobee TH Heavy Duty Slurry Pump the most flexible choice for the chemical plant environment.

    Sand & Gravel
    Designed for easy and simple strip down and re-assembly, the Tobee TH Heavy Duty Slurry Pump minimises downtime, making it the ideal choice where installed stand by pumps are not available.

    Sugar Processing
    The premium reliability and service life of the Tobee TH Heavy Duty Slurry Pump is specified by many sugar plant engineers worldwide where uninterrupted pump operation during the sugar campaign is a critical requirement.

    Flue Gas Desulphurisation
    The new generation of specially formulated abrasion and corrosion resistant alloys, together with the very latest elastomer technology, positions Tobee Pumps firmly as a major supplier of pumps to the FGD industry.

    Oil & Gas Exploration
    Over a number of years we have developed the proven design of the Tobee TH Heavy Duty Slurry Pump ranges to suit the specific demands of offshore applications. We can now offer the most reliable top side solution to erosive wear.

    Industrial Applications
    Wherever abrasive solids are causing premature failure of pumps, the Tobee TH Heavy Duty Slurry Pump range has the right combination of performance, wear life and reliability to bring the customer the lowest cost of ownership.

    HEBEI TOBEE PUMP CO.,LIMITED
    Add:Hi-tech Development Zone | Shijiazhuang City | Hebei Province | China.
    Email:Sales1@tobeepump.com | Skype:Tobee.pump | Mob:+86-18731151301 | Web:www.tobeepump.com

  2. #2

    Lightbulb Piracy Persists

    Centrifugal slurry pumps are simple pieces of hardware which attract copies out of proportion to their merits. Wear is accepted and replacement parts are simple items. There is no need to publicise the merits of pirate parts. If the principal suppliers were seriously threatened they could quite easily buy out an Asian manufacturer and start producing the genuine article. However the principal would then be lumbered with a development dilemma which might prove unproductive. It is an industry issue. Do you want to run Warman out of business: then you have to decide whether you need a new standard to attack. Surely if your pump has merit it will stand the test. Therein lies the test, CAN YOU QUANTIFY WEAR. Of course not. So why make claims for durability when nobody in the business knows, really knows, what they are talking about.
    Do you radiograph your castings. Warman, according to discussions with their Chief Engineer, don't: despite rubbishing competitors when it comes to operating pumps in series. No charge!
    John Gateley
    johngateley@hotmail.com
    www.the-credible-bulk.com

Similar Threads

  1. China TOP10 Slurry Pump Manufacturer
    By pumptobee in forum Product Presentations
    Replies: 1
    Last Post: 10th May 2018, 10:55
  2. Detergent Slurry Pump
    By N. Ahmed in forum New Projects, Tenders, Inquiries
    Replies: 1
    Last Post: 10th May 2018, 10:46
  3. Used Pump IBAU Size 1B-D 350 Screw Pump, 350 TPH,2001
    By davef@damac.co.uk in forum Used & Refurbished Equipment
    Replies: 0
    Last Post: 8th March 2017, 11:22
  4. Centrifugal Slurry Pump Required
    By D.R. Kaushal in forum Hydraulic Conveying
    Replies: 6
    Last Post: 26th April 2006, 14:01
  5. Slurry Pump System
    By Author in forum New Products, New Orders
    Replies: 0
    Last Post: 7th April 2006, 19:31

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO