Results 1 to 2 of 2

Thread: Improving the Density of fine aluminium hydroxide powders

  1. Exclamation Improving the Density of fine aluminium hydroxide powders

    We are in the development of fine aluminium hydroxide powders. we are targeting the particle D50 to be around 1 to 2 Microns by sedigraph method. We will be drying the aluminium hydroxide cake ( 50 % moisture) in oven drier at 80 Deg. C overnight. after drying, we are gettting very low bulk density in the product. The tapped bulk density is around 0.35 to 0.4 g/cc. But we wanted to have tapped bulk density of 0.55 to 0.65 g/cc. Please help me with this.

  2. #2

    Unhappy Biting the Dust

    You have not mentioned the official density of anhydrous aluminium hydroxide and I am not going to look it up for you.
    So, find that out and then you will be able to see what could be achieved.
    Also, please explain the method for transforming the cake into powder form.
    Most forum members cannot reliably answer half a question.
    John Gateley

Similar Threads

  1. Conveying Fine Powders
    By Jim Graham in forum Pneumatic Conveying
    Replies: 7
    Last Post: 4th June 2018, 14:30
  2. Apparent Density, Bulk Density, Concentration?
    By surrisri_bulk-online in forum Research & Development
    Replies: 14
    Last Post: 13th February 2006, 10:16
  3. Query on Conveying Granulated and Fine Powders
    By dob01 in forum Ask Lyn Forum
    Replies: 0
    Last Post: 15th June 2004, 3:03
  4. Looking for Precious Metals-Based Fine Powders
    By Xiangqun in forum New Projects, Tenders, Inquiries
    Replies: 1
    Last Post: 4th April 2003, 13:31
  5. Ultra Fine Milling of Polymer Powders
    By John Richards in forum Powder Processing
    Replies: 3
    Last Post: 21st October 2002, 11:30

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Single Sign On provided by vBSSO