Results 1 to 3 of 3

Thread: Problem with Ball press roller briquette machine

  1. #1
    nima19864 Guest

    Problem with Ball press roller briquette machine

    Dear Sirs
    We have a Ball press roller briquette machine and we want to make briquettes of Lime and bauxite. the problem is that when we start the machine after a while the pockets (roller cells) are blocked tightly with material and they the material should be removed off pockets with a lot of force. We did send rollers to plating and coating , used gasoline and oil for lubricating but it did no help. Can anyone suggest what could solve the problem?

  2. briquetting

    Dear Sir,

    the issue you encounter may derive from very different root causes:
    - moisture content, particle mix
    - particle size
    - particle surface / originating process
    - briquetting pressure
    - pocket design / slope angles, suface ...
    etc.

    To cut a long story short, imo the best solution would be if you engage with a reputable supplier of briquetting machinery and ask the / your questions or else receive a relevant set of questions to your intended process thsat may help you forward.

    Kind regards
    R.
    Just for an example, and w/o any link of mine to this enterprise: http://www.koeppern-international.com/

  3. #3
    Pocket roll briquetting was always a problem for us in the salt industry and for that reason we switched to corrugated rolls and the problems as you describe went away.

    I am not saying that would be your solution and as Rowland says it is best to consult with the OEM for the best advice.
    Gary Blenkhorn
    President - Bulk Handling Technology Inc.
    gblenkhorn@bulkht.ca
    http://www.bulkht.ca

    Offering Conveyor Design Services, DEM Flow Simulation Services, Conveyor Transfer Design Services, SolidWorks Design Services for equipment layouts and Software for the Bulk Material Industry.

Similar Threads

  1. Replies: 0
    Last Post: 30th July 2015, 10:44
  2. Briquette Making Machine/Large Briquette Machine/32Briquetting Machine
    By liling in forum Briquetting & Agglomeration
    Replies: 0
    Last Post: 30th July 2015, 10:40
  3. Mechanical Briquette Press
    By poster in forum Powder Processing
    Replies: 3
    Last Post: 25th March 2013, 13:20
  4. Roller Press & Air Seperators
    By minerx in forum Used & Refurbished Equipment
    Replies: 0
    Last Post: 3rd February 2006, 16:05
  5. Features of the Roller Press
    By Nicky in forum Cement Lime Gypsum
    Replies: 3
    Last Post: 13th July 2005, 14:39

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO