Results 1 to 1 of 1

Thread: POWTECH 2004: AUBEMA

  1. #1
    Author Guest

    POWTECH 2004: AUBEMA

    Stand 9-331

    AUBEMA vibrating mills are used for grinding of various kinds of minerals ranging from hard to brittle products. Depending on the feed material, final grain sizes with a fineness of up to 40 µm may be attained. Twin- and tree-tube vibrating mills are driven by an unbalanced drive. The grinding action itself is produced by the rotation of the grinding bodies in opposite direction towards the driving rotation. The material being ground runs through the grinding cylinders in a helical curve and slides down from the inflow to the outflow. The extremely high degree of fineness achieved is the result of this long grinding procedure.

    The grinding cylinders are filled to about 60-70%. Balls, cylpebs and grinding rods are used as grinding bodies. If the grinding is iron-free, the grinding bodies are made of aluminium oxide. The grinding bodies are held up at the outflow heads by separating discs, so that only the crushed material can flow out. Due to the location of the grinding tubes, one above the other in a slanting position, the material flow can be done in a number of different ways.

    For more information, please visit:
    https://edir.bulk-online.com/oldedirredirect/200428.htm

    Photo:
    Twin Tube Vibrating Mill for limestone
    Feed size: 10 – 25 mm
    Product size: 0,05 – 0,7 mm
    Capacity: 15 t/h
    Customer: Harbin / Vietnam
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	aubema_powtech04.jpg 
Views:	464 
Size:	16.3 KB 
ID:	598  

Similar Threads

  1. POWTECH 2004: E.S.C.H.
    By Author in forum POWTECH 2004
    Replies: 0
    Last Post: 17th February 2004, 10:54
  2. POWTECH 2004: Pro-C-epT
    By Author in forum POWTECH 2004
    Replies: 0
    Last Post: 12th February 2004, 11:17
  3. POWTECH 2004: SAATITECH
    By Author in forum POWTECH 2004
    Replies: 0
    Last Post: 22nd January 2004, 16:16
  4. POWTECH 2004: CFM-Reitek
    By Author in forum POWTECH 2004
    Replies: 0
    Last Post: 19th January 2004, 12:46
  5. Powtech 2004
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 14th August 2003, 21:21

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO