Results 1 to 2 of 2

Thread: Binderless Biomass Briquettes Manufacturing Technology

  1. #1

    Post Binderless Biomass Briquettes Manufacturing Technology

    Hello,

    I have heard about biomass briquetting machines which indicates that it is an eco friendly machine. It produces briquettes product without any kinds of binder or chemical. I want to know that how is it possible to produce briquettes without any binder or third party materials.

    I need solution for this confusion, so kindly suggest me.

    Regards
    Ravirajsinh Rever
    India





    Illustration added by Administrator as an example only:

    Click image for larger version. 

Name:	Biomass_briquetting_supreme-75-model.jpg 
Views:	184 
Size:	313.0 KB 
ID:	43466

    Binderless Biomass Briquetting Plant
    Last edited by Author; 27th March 2015 at 14:44.

  2. Briquette manufacturing technology

    T.C.Inc. has been involved in briquetting/agglomeration and mineral processing technology since the 1960's, in the pelletising, direct reduction of mineral ores, recovery of mill wastes, biomass briquetting with and without binders, roll and pressure briquetting and extrusion press. T.C.Inc. holds U.S.Patents in Agglomeration Technology and Briquetting.
    It is necessary to understand the physical nature and the chemical nature of any materials that are the subject of agglomeration/briquetting. This will indicate the type of briquetting required and for the end use of the briquette, whether it be in the form of medicines, use for heating and cooking or just the ability of handling and further processing.
    In the case of handling biomass materials, without binders, the sizes and mixtures are the most important in dealing with the characteristics in order for the materilas to bind together. Simplistically, very careful mixing of all the various sizes should be the determining factor in order to fill all the poors, allowing no open spaces in the briquette feed. Then the only consideration will be adequate pressure to compact the materials such that fusion will result in materials sticking together.
    If the briquettes are still weak, then segregation of some of the sizes may be required. Eventually the correct mixtures will result in the best results. Testing of the end products can be done by drop tests to see how the briquettes will stand up to handling and storage.
    There is a solution of any materials can be briquetted depending on the selection of the mixtures and the selection of the machines. No selection of equipment should be made without end result testing completed before hand.
    Please contact: Thomas Coyne, President, T.C.Inc., email address: tcinc002@aol.com

Similar Threads

  1. Transfer of Technology for Manufacturing Green Cement and other products
    By libranengineering in forum General Aspects
    Replies: 0
    Last Post: 16th January 2016, 21:54
  2. Screening of Crushed Briquettes (Rice Husk)
    By skg_sahu in forum General Aspects
    Replies: 0
    Last Post: 2nd November 2013, 15:39
  3. Physical Properties of Rice Straw Briquettes
    By Shilhum in forum Research & Development
    Replies: 2
    Last Post: 13th October 2012, 11:41
  4. Loading Briquettes into Containers
    By Bonifacio - Philippines in forum Bulk Ports & Shipping
    Replies: 4
    Last Post: 7th December 2004, 11:03
  5. Complete solution for petcoke briquettes
    By adriancristina in forum Size Reduction & Comminution
    Replies: 0
    Last Post: 27th March 2003, 8:22

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO