Results 1 to 2 of 2

Thread: Sonic Horn Improves Boiler Ash Flow

  1. #1
    Dr. Reinhard H. Wöhlbier
    Online Services Dr. Wohlbier

    Professional Experience 54 Years / 6 Month Dr. Reinhard H. Wöhlbier has 54 Years and 6 Month professional experience

    Discussions 5678 Dr. Reinhard H. Wöhlbier acceded to 5678 discussions, Publications 1 Dr. Reinhard H. Wöhlbier Wöhlbier released 1 publications

    Know-How Marketing (1133) Dr. Reinhard H. Wöhlbier used this tag 1133 times, Bulk Solids Handling (531) Dr. Reinhard H. Wöhlbier used this tag 531 times, Powder Processing (8) Dr. Reinhard H. Wöhlbier used this tag 8 times

    Sonic Horn Improves Boiler Ash Flow

    Name:  Martin_Eng_Logo.jpg
Views: 203
Size:  30.5 KB




    ALASKAN BREWING COMPANY USES SONIC HORN TO CLEAR BOILER ASH BUILD-UP

    Juneau, AK, USA – An innovative brewery in Alaska has installed a sonic horn to help improve ash flow and prevent clogging in the exhaust stream of an ingenious hybrid boiler system that uses spent grain from the brewing process as fuel. Ash accumulation issues had been forcing the company to shut down its equipment to cool and manually clean the swirlers and collectors of its ash handler on a weekly basis. The process required an outage of 3-4 days, including as much as twelve hours of maintenance time with bottle brushes and bead blasting.

    Instead of shutting down the equipment after just 25 hours of operation, company officials now report that the system can complete an entire brewing cycle, with little or no performance loss in 94 hours of boiler run time. The acoustic cleaner from Martin Engineering (Neponset, IL) is viewed as a key element in developing an ash handling process that meets the firm’s goals for both efficiency and environmental stewardship.

    Alaskan Brewing Company is the first brewery opened in Juneau since Prohibition, and from its beginning in 1986, owners Marcy and Geoff Larson sought to establish a process for making high quality craft-brewed beer, one that was both cost-efficient and environmentally responsible. “Supplies and fuel are expensive here, due to the distances involved,” observed Maintenance Supervisor Suki Patterson. “Brewing in Alaska is a challenge, because everything other than labor and water has to be imported, so we’re always looking for ways to be creative in obtaining and using our resources.”


    Click image for larger version. 

Name:	Martin_Eng_Alaskan_Brewing_Water_Side_Biomass_Fig_1.jpg 
Views:	131 
Size:	146.7 KB 
ID:	37771
    (double click on picture to open in new window)

    Water side biomass:
    The high-pressure firebox boiler operates at 125 PSI during the
    brewing process, achieving 6600 pounds of steam per hour..



    While other brewers sometimes add spent grain as supplemental fuel in their processes, the system at the Alaskan Brewing Company is thought to be the only one in the U.S. to use it as the sole source of boiler fuel, with any excess shipped out as cattle feed. “During our production cycle, we would have to burn hundreds of gallons of diesel fuel per day to fire the boiler,” Patterson explained. “With this system, we can use by-products from the brewing process, but that presents some unique issues. Conventional hog fuel boilers typically burn feedstocks that produce about 0.5% ash, while the spent grain that we use produces more than 5%.”


    Process Equipment
    The company’s equipment includes a Model N65 Firebox Boiler assembly, manufactured for King Coal Furnace (Bismark, ND) by Hurst Boiler & Welding Company (Coolidge, GA). The high-pressure firebox boiler with left side breeching operates at 125 PSI during the brewing process, achieving 6600 pounds of steam per hour from a furnace volume of 519 cubic feet.

    To manage the ash and minimize emissions, a Multiclone Dust Collector from the Babcock & Wilcox Power Generation Group imparts a whirling motion to the ash-laden exhaust gas as it enters the multiple-tube cyclonic collector. This action generates centrifugal force that concentrates particles of entrained dust at the interior walls of the collecting tubes. The particles then fall and are discharged from the bottom of the tube, with clean gas exiting through the outlet at the collecting tube’s vertical centerline. The boiler also uses soot blowers on a timer to clear the fire tubes.

    “Unlike other fuels typically used in the brewing process, dried grain also produces an extremely fine ash that readily absorbs moisture from the atmosphere,” Patterson continued. “It tends to develop a gummy texture, so it can collect on the interior surfaces and become difficult to remove.”

    Intent on resolving the problem, Patterson researched the issue online, finding information on how brewers and other industries were successfully managing fine ash, aerosols and smoke particles. She contacted Martin Engineering to discuss potential solutions, and developed detailed engineering drawings of the system to help explain the situation and outline the operating conditions.


    Click image for larger version. 

Name:	Martin_Eng_Alaskan_Brewing_Biomass_Boiler multiclone 024_Fig_2.jpg 
Views:	130 
Size:	182.1 KB 
ID:	37772
    (double click on picture to open in new window)

    Biomass boiler multiclone 024:
    Ash accumulation issues had been forcing the company to shut down
    its equipment to manually clean the ash handler on a weekly basis.



    Although Martin Engineering had never sold its products to the brewing industry, the company has a nearly 70-year history of inventive designs to handle bulk materials and improve process flows. “The conditions resembled the issues we see every day in coal-fired power plants, biomass-fueled boilers and other applications,” recalled Product Specialist Mike Masterson. “Once we reviewed all the details, it appeared to be an environment in which a sonic horn could provide some significant benefit.”

    Because Martin Engineering lacked any data on its sonic horns in this specific application, the company offered to ship an appropriately-sized model to the brewery on a trial basis, with the understanding that the product could be returned without charge if it was unsuccessful. The company also worked with Patterson and her crew to determine the optimum location and provide instruction on its installation at the intake of the 6-inch cyclone separator.

    Acoustic Cleaning Technology
    “Acoustic cleaning has been providing cost-saving solutions for decades in a variety of different industries and applications,” commented Rich Shields, Regional Manager for Martin Engineering. “It’s a proven technology that can raise throughput and reduce blockages in a very wide range of materials, preventing dry particulate build-up to increase system efficiency and service life, while reducing downtime and maintenance.”

    The Martin® Sonic Horn is an acoustic cleaner that has been widely used in the process industries, particularly in cement manufacturing. In addition to its low cost of ownership, acoustic cleaning helps avoid structural fatigue or damage. Especially effective around tubes and behind obstacles, sonic energy de-bonds particulates with a 360-degree sweep, cleaning inaccessible surfaces.

    The horns work by producing a low-frequency, high-pressure sound wave, which is created when compressed air flexes a titanium diaphragm in the sound generator. This sound wave is then magnified as it is emitted through the cleaner’s bell. The pressure causes dry particulate deposits to resonate and become fluidized, allowing them to be removed by constant gas flow or gravity.


    Click image for larger version. 

Name:	Martin_Eng_Alaskan_Brewing_Biomass_Sonic_Horn_Fig_3.jpg 
Views:	108 
Size:	216.4 KB 
ID:	37773
    (double click on picture to open in new window)

    Biomass sonic horn:
    The acoustic cleaner helped the brewery develop an ash handling process
    that meets the firm’s goals for efficiency and environmental stewardship.



    As Masterson suspected, the technology worked well in this application, and Patterson saw immediate improvement after installation. “We’re still fine-tuning the process, and we may add a second horn in another location,” she said. “But our Plant Manager and Engineering Technician agree that this is an important first step in completely resolving our ash problems.”

    When asked about the customer service she received from Martin Engineering’s staff, Patterson added: “Even though brewing is not an important market for Martin Engineering, they spent a lot of time to help resolve an issue that had been a nagging problem for us. It was a very small sale -- just one component -- but it meant a great deal to us. They have been great to work with.”


    __________
    Martin Engineering supplies conveyor products, flow aids and industrial vibrators around the world for a wide variety of bulk material handling applications, including cement/clinker, rock/aggregate, coal, biomass, grain and other materials. Founded in 1944, Martin Engineering is the world leader in making bulk materials handling cleaner, safer and more productive. The firm is headquartered in Neponset, IL, offering manufacturing, sales and service from factory-owned business units in Brazil, China, France, Germany, Indonesia, Mexico, South Africa, Turkey, India and the UK, and under exclusive license with ESS Australia.




    For more information, please visit:
    https://edir.bulk-online.com/profile...ngineering.htm

    Google Search:
    http://www.google.de/search?num=100&...ulk-online.com
    http://www.google.de/search?q=Martin...=lnms&tbm=isch

    Watch these Videos:
    http://videos.bulk-online.com/video/...anging-on-Bins
    http://videos.bulk-online.com/video/...for-Innovation
    http://videos.bulk-online.com/video/...-IN-INNOVATION
    http://videos.bulk-online.com/video/...veyor-Products

    Keywords:
    bulk-online Leader, Environmental Control Equipment, Dust Collectors, Dust Suppression, Mechanical Conveyors, Air Supported Conveyor, Belt Conveyors, Parts & Components, Belt Cleaners & Scrapers, Idlers Pulleys Rollers, Self-Aligning Idlers, Impact Tables, Repair of Belt Conveyor Installations, Rubber Seals, Skirt Boards, Slider Beds, Transfer Chutes, Vibrators, Silo Storage Equipment & Systems, Silo Discharge Equipment, Air Blasters, Air Cannons, Discharge Aids, External Vibrators, Silo Services, Silo Cleanout Services

    Martin Engineering USA is a "bulk-online Leader" and a "bulk-online Sponsor"





    Return to:

  2. #2
    Join Date
    Nov 14
    Posts
    9

    sonic horn acoustic cleaning technology

    Quote Originally Posted by Author View Post
    Name:  Martin_Eng_Logo.jpg
Views: 203
Size:  30.5 KB




    ALASKAN BREWING COMPANY USES SONIC HORN TO CLEAR BOILER ASH BUILD-UP

    Juneau, AK, USA – An innovative brewery in Alaska has installed a sonic horn to help improve ash flow and prevent clogging in the exhaust stream of an ingenious hybrid boiler system that uses spent grain from the brewing process as fuel. Ash accumulation issues had been forcing the company to shut down its equipment to cool and manually clean the swirlers and collectors of its ash handler on a weekly basis. The process required an outage of 3-4 days, including as much as twelve hours of maintenance time with bottle brushes and bead blasting.

    Instead of shutting down the equipment after just 25 hours of operation, company officials now report that the system can complete an entire brewing cycle, with little or no performance loss in 94 hours of boiler run time. The acoustic cleaner from Martin Engineering (Neponset, IL) is viewed as a key element in developing an ash handling process that meets the firm’s goals for both efficiency and environmental stewardship.

    Alaskan Brewing Company is the first brewery opened in Juneau since Prohibition, and from its beginning in 1986, owners Marcy and Geoff Larson sought to establish a process for making high quality craft-brewed beer, one that was both cost-efficient and environmentally responsible. “Supplies and fuel are expensive here, due to the distances involved,” observed Maintenance Supervisor Suki Patterson. “Brewing in Alaska is a challenge, because everything other than labor and water has to be imported, so we’re always looking for ways to be creative in obtaining and using our resources.”


    Click image for larger version. 

Name:	Martin_Eng_Alaskan_Brewing_Water_Side_Biomass_Fig_1.jpg 
Views:	131 
Size:	146.7 KB 
ID:	37771
    (double click on picture to open in new window)

    Water side biomass:
    The high-pressure firebox boiler operates at 125 PSI during the
    brewing process, achieving 6600 pounds of steam per hour..



    While other brewers sometimes add spent grain as supplemental fuel in their processes, the system at the Alaskan Brewing Company is thought to be the only one in the U.S. to use it as the sole source of boiler fuel, with any excess shipped out as cattle feed. “During our production cycle, we would have to burn hundreds of gallons of diesel fuel per day to fire the boiler,” Patterson explained. “With this system, we can use by-products from the brewing process, but that presents some unique issues. Conventional hog fuel boilers typically burn feedstocks that produce about 0.5% ash, while the spent grain that we use produces more than 5%.”


    Process Equipment
    The company’s equipment includes a Model N65 Firebox Boiler assembly, manufactured for King Coal Furnace (Bismark, ND) by Hurst Boiler & Welding Company (Coolidge, GA). The high-pressure firebox boiler with left side breeching operates at 125 PSI during the brewing process, achieving 6600 pounds of steam per hour from a furnace volume of 519 cubic feet.

    To manage the ash and minimize emissions, a Multiclone Dust Collector from the Babcock & Wilcox Power Generation Group imparts a whirling motion to the ash-laden exhaust gas as it enters the multiple-tube cyclonic collector. This action generates centrifugal force that concentrates particles of entrained dust at the interior walls of the collecting tubes. The particles then fall and are discharged from the bottom of the tube, with clean gas exiting through the outlet at the collecting tube’s vertical centerline. The boiler also uses soot blowers on a timer to clear the fire tubes.

    “Unlike other fuels typically used in the brewing process, dried grain also produces an extremely fine ash that readily absorbs moisture from the atmosphere,” Patterson continued. “It tends to develop a gummy texture, so it can collect on the interior surfaces and become difficult to remove.”

    Intent on resolving the problem, Patterson researched the issue online, finding information on how brewers and other industries were successfully managing fine ash, aerosols and smoke particles. She contacted Martin Engineering to discuss potential solutions, and developed detailed engineering drawings of the system to help explain the situation and outline the operating conditions.


    Click image for larger version. 

Name:	Martin_Eng_Alaskan_Brewing_Biomass_Boiler multiclone 024_Fig_2.jpg 
Views:	130 
Size:	182.1 KB 
ID:	37772
    (double click on picture to open in new window)

    Biomass boiler multiclone 024:
    Ash accumulation issues had been forcing the company to shut down
    its equipment to manually clean the ash handler on a weekly basis.



    Although Martin Engineering had never sold its products to the brewing industry, the company has a nearly 70-year history of inventive designs to handle bulk materials and improve process flows. “The conditions resembled the issues we see every day in coal-fired power plants, biomass-fueled boilers and other applications,” recalled Product Specialist Mike Masterson. “Once we reviewed all the details, it appeared to be an environment in which a sonic horn could provide some significant benefit.”

    Because Martin Engineering lacked any data on its sonic horns in this specific application, the company offered to ship an appropriately-sized model to the brewery on a trial basis, with the understanding that the product could be returned without charge if it was unsuccessful. The company also worked with Patterson and her crew to determine the optimum location and provide instruction on its installation at the intake of the 6-inch cyclone separator.

    Acoustic Cleaning Technology
    “Acoustic cleaning has been providing cost-saving solutions for decades in a variety of different industries and applications,” commented Rich Shields, Regional Manager for Martin Engineering. “It’s a proven technology that can raise throughput and reduce blockages in a very wide range of materials, preventing dry particulate build-up to increase system efficiency and service life, while reducing downtime and maintenance.”

    The Martin® Sonic Horn is an acoustic cleaner that has been widely used in the process industries, particularly in cement manufacturing. In addition to its low cost of ownership, acoustic cleaning helps avoid structural fatigue or damage. Especially effective around tubes and behind obstacles, sonic energy de-bonds particulates with a 360-degree sweep, cleaning inaccessible surfaces.

    The horns work by producing a low-frequency, high-pressure sound wave, which is created when compressed air flexes a titanium diaphragm in the sound generator. This sound wave is then magnified as it is emitted through the cleaner’s bell. The pressure causes dry particulate deposits to resonate and become fluidized, allowing them to be removed by constant gas flow or gravity.


    Click image for larger version. 

Name:	Martin_Eng_Alaskan_Brewing_Biomass_Sonic_Horn_Fig_3.jpg 
Views:	108 
Size:	216.4 KB 
ID:	37773
    (double click on picture to open in new window)

    Biomass sonic horn:
    The acoustic cleaner helped the brewery develop an ash handling process
    that meets the firm’s goals for efficiency and environmental stewardship.



    As Masterson suspected, the technology worked well in this application, and Patterson saw immediate improvement after installation. “We’re still fine-tuning the process, and we may add a second horn in another location,” she said. “But our Plant Manager and Engineering Technician agree that this is an important first step in completely resolving our ash problems.”

    When asked about the customer service she received from Martin Engineering’s staff, Patterson added: “Even though brewing is not an important market for Martin Engineering, they spent a lot of time to help resolve an issue that had been a nagging problem for us. It was a very small sale -- just one component -- but it meant a great deal to us. They have been great to work with.”


    __________
    Martin Engineering supplies conveyor products, flow aids and industrial vibrators around the world for a wide variety of bulk material handling applications, including cement/clinker, rock/aggregate, coal, biomass, grain and other materials. Founded in 1944, Martin Engineering is the world leader in making bulk materials handling cleaner, safer and more productive. The firm is headquartered in Neponset, IL, offering manufacturing, sales and service from factory-owned business units in Brazil, China, France, Germany, Indonesia, Mexico, South Africa, Turkey, India and the UK, and under exclusive license with ESS Australia.




    For more information, please visit:
    https://edir.bulk-online.com/profile...ngineering.htm

    Google Search:
    http://www.google.de/search?num=100&...ulk-online.com
    http://www.google.de/search?q=Martin...=lnms&tbm=isch

    Watch these Videos:
    http://videos.bulk-online.com/video/...anging-on-Bins
    http://videos.bulk-online.com/video/...for-Innovation
    http://videos.bulk-online.com/video/...-IN-INNOVATION
    http://videos.bulk-online.com/video/...veyor-Products

    Keywords:
    bulk-online Leader, Environmental Control Equipment, Dust Collectors, Dust Suppression, Mechanical Conveyors, Air Supported Conveyor, Belt Conveyors, Parts & Components, Belt Cleaners & Scrapers, Idlers Pulleys Rollers, Self-Aligning Idlers, Impact Tables, Repair of Belt Conveyor Installations, Rubber Seals, Skirt Boards, Slider Beds, Transfer Chutes, Vibrators, Silo Storage Equipment & Systems, Silo Discharge Equipment, Air Blasters, Air Cannons, Discharge Aids, External Vibrators, Silo Services, Silo Cleanout Services

    Martin Engineering USA is a "bulk-online Leader" and a "bulk-online Sponsor"





    Return to:
    boilers fired by biomass wastes would generate much unburnt carbon, namely soot. Soot buildup on heating surface of heat exchanger can greatly reduce the boiler efficiency. Without a proper soot cleaning technology, boiler has to shut down after a short time operation.

    here is a case. Saraff Energies Limited is a biomass power plant located in Krabi, Thailand. they use empty fruit bunch fiber as fuel. soot fouling is very serious. they uses sonic horn acoustic cleaning technology to solve their problem.

    Moreover, sonic horn can be used for ESP, SCR, bag house in power plants.

Similar Threads

  1. New MARTIN® Sonic Horns
    By Author in forum Product Presentations
    Replies: 1
    Last Post: 10th July 2019, 4:19
  2. Sub-sonic or Super-sonic Eductor
    By David Chan in forum Pneumatic Conveying
    Replies: 4
    Last Post: 19th April 2014, 19:08
  3. Vibration Improves Material Flow
    By Author in forum Case Studies
    Replies: 0
    Last Post: 12th August 2011, 8:26
  4. Diamondback Hopper® Improves Flow
    By Author in forum New Products, New Orders
    Replies: 0
    Last Post: 9th July 2009, 19:30
  5. SiloPatrol® Improves Inventory Control
    By Author in forum New Products, New Orders
    Replies: 0
    Last Post: 12th May 2009, 18:33

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO