Results 1 to 1 of 1

Thread: PGBSIA 2013: Final Program

  1. #1
    Dr. Reinhard H. Wöhlbier
    Online Services Dr. Wohlbier

    Professional Experience 54 Years / 2 Month Dr. Reinhard H. Wöhlbier has 54 Years and 2 Month professional experience

    Discussions 5681 Dr. Reinhard H. Wöhlbier acceded to 5681 discussions, Publications 1 Dr. Reinhard H. Wöhlbier Wöhlbier released 1 publications

    Know-How Marketing (1133) Dr. Reinhard H. Wöhlbier used this tag 1133 times, Bulk Solids Handling (531) Dr. Reinhard H. Wöhlbier used this tag 531 times, Powder Processing (8) Dr. Reinhard H. Wöhlbier used this tag 8 times

    PGBSIA 2013: Final Program

    Name:  Flag_of_India.png
Views: 368
Size:  1.8 KB


    Name:  Thapar_Uni_logo.jpg
Views: 381
Size:  7.8 KB




    PGBSIA 2013:
    International Conference on Powder, Granule and Bulk Solids:
    Innovations and Applications


    Venue: Thapar University, Patiala, India
    Dates: November 28-30, 2013


    Conference Website: http://www.pgbsia2013.com


    Dear Sir/Madam

    I am pleased to invite you to attend this MEGA EVENT in the area of POWDER, GRANULE and BULK SOLIDS to be organized on November 28-30, 2013 at Thapar University, Patiala, India.

    The Conference will cover various fundamental and applied aspects of Particle Technology (from Research to Industry) - Integrating Academic and Industry Communities.


    Here is the final Technical Program:


    PGBSIA 2013:
    SCHEDULE OF TECHNICAL PROGRAM


    DAY 1

    INVITED EXPERT LECTURES

    Advances in bulk material handling technology – linking research and industry
    Peter Wypych, University of Wollongong, Australia

    Control of dust in particulate process industries
    C.R. Copeland and S. Komar Kawatra, Michigan Technological University, USA



    SESSION 1A1:
    BULK SOLIDS HANDLING AND PROCESSING


    An investigation into friction forces of particulate plugs moving in vertical and horizontal pipes
    Semion Shaul and Haim Kalman, Ben-Gurion University of the Negev, Israel

    Local mean velocity measurement of pneumatically conveyed particles using electrostatic sensor arrays and cross-correlation method
    Shengnan Wang, Chuanlong Xu, Shimin Wang and Yuezhu Wu, Southeast University, Nanjing University, Nanjing, China

    A comparative study on gravity-induced flow and forced flow of pulverized coal
    Haifeng Lu, Xiaolei Guo, Fuyu Wu, Xiaolin Sun, Kai Liu and Xin Gong, Shanghai Engineering Research Centre of Coal Gasification, Institute of Clean Coal Technology, East China University of Science and Technology, China

    Vibrological effects in rapid gravity flows of particulate solids on a rough chute
    Viktor N. Dolgunin, Andrew N. Kudy, Pavel A. Ivanov, Oleg O. Ivanov, Anatoliy M. Klimov and Vasiliy A. Pronin, Tambov State Technical University, Tambov, Russian Federation

    Combustible Dust Explosion Risk Management
    Felipe Ong, BS&B Safety Systems, Singapore


    SESSION 1A2:
    BULK SOLIDS HANDLING AND PROCESSING


    WORKSHOP:
    Design, case-studies and troubleshooting of dense-phase pneumatic conveying systems
    Peter Wypych and S.S.Mallick,University of Wollongong, Australia and Thapar University, India


    SESSION 1A3:
    BULK SOLIDS HANDLING IN THERMAL POWER PLANTS


    Practical issues of coal handling plant operation in a thermal power plants
    I.K.Rajdeva, National Thermal Power Corporation (NTPC), India

    Latest developments in ash handling systems in Indian power plants
    Tirupati Rao, Bharat Heavy Electricals Limited (BHEL), Bangalore, India

    Advances in pneumatic, slurry conveying within industry
    Sumantra Sen, Tecpro Systems Limited, Kolkata, India

    Present day scenario of handling bottom ash
    Debashish De, Development Consultants Private Limited, Kolkata, India


    SESSION 1B1:
    PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION


    IR spectrum of the wet very fine particulate material
    Tomas Sverak, Christopher G. J. Baker and Katerina Sikorova, Brno University of Technology, Czech Republic

    tudy of wettability and surface energy characteristics of nano-coated pharmaceutical excipient powders
    Vikram Karde and Chinmay Ghoroi, Indian Institute of Technology, Gandhinagar, India

    A Scientific approach to evaluate normal class room chalk and imported dustless chalk: an application of instrumentation and control engineering
    Manish Thakker, Dinesh O.Shah, Premal Shukla, Dharmsinh Desai University, India, University of Florida, USA

    Influence of pH on the stability of alumina and silica nanosuspensions produced by stirred media milling
    Chetan M. Patel, Mousumi Chakraborty and Z. V. P. Murthy, National Institute of Technology, Surat, India

    Control of nanoparticle agglomeration: role of synthesis technique and surfactant
    Chandni Khurana, O.P Pandey and Bhupendra Chudasama, Thapar University, India


    SESSION 1B2:
    PARTICLE MECHANICS AND SIMULATION


    Discrete element modeling of grain flow pattern in continuous cross-flow grain dryer
    R. P. Kingsly Ambrose, Josephine M. Boac and Dirk Maier, Kansas State University, U.S.A

    Effect of elliptical particles orientation on macro and micromechanical behaviour during direct shear test
    Ali Asghar Mirghasemi and Morteza Naeij, University of Tehran, Iran

    Modeling of nano-suspension droplet drying by CFD-DEM approach
    Y.Ostrovski, A. Levy, Ben-Gurion University of the Negev, Israel

    A study of CFD modelling on variation of solid fraction in a batch fluidized bed
    G Srinivas and Y Pydi Setty, National Institute of Technology, Warangal, India

    ASPEN Plus simulation and experimental study of different dry biomass solid waste gasification process using air–steam fluidized bed gasifier
    R. Tripathy and A. Sahoo, National Institute of Technology, Rourkela, India


    SESSION 1C1:
    FLUIDIZATION AND GRANULAR FLOW


    The porosity distribution in monodisperse and polydisperse fixed beds and its impact on the fluid flow
    Sebastian Schulze, Petr A. Nikrityuk, Bernd Meyer, Institute of Energy Process Engineering and Chemical Engineering, Germany

    Material Behaviour of Spherical Elastic-Plastic Granules at Diametrical Compression
    Alexander Russell, Peter Müller and Jürgen Tomas, Otto von Guericke University of Magdeburg, Germany

    Droplet spreading on micro-patterned and micro-porous granular beds
    Ananth Praveen Kumar, Venkatanarayana Prasad S, Tamal Banerjee and Dipankar Bandyopadhyay, Indian Institute of Technology, Guwahati, India

    Droplet spreading on micro-patterned and micro-porous granular beds
    Ananth Praveen Kumar, Venkatanarayana Prasad S, Tamal Banerjee and Dipankar Bandyopadhyay, Indian Institute of Technology, Guwahati, India

    Study of the dynamics of wet granulates under shear
    Jayati Sarkar and Dheerendra Dubey, Indian Institute of Technology, Delhi, India


    SESSION 1C2:
    APPLICATIONS OF PARTICLE TECHNOLOGY


    Oil agglomeration of coal fines in continuous Mode of Operation
    Ankush Gupta, H.V.C. Chary Guntupalli, M.G. Dastidar, Indian Institute of Technology, Delhi, Central Pollution Control Board, Delhi, India

    A comparative study on physico-chemical characteristics and synthesis of typical nanofluids
    Ajay Vasishth, K.S.R. Murthy and Gagan Anand, University of Petroleum and Energy Studies, Dehradun, India

    Optimization of the deposition parameters of DLC coatings with the IC-PECVD method
    T.P.Singh and Vijay Kumar S. Jatti, Symbiosis Institute of Technology, Pune, India

    Particle deposition of diamond-like-carbon on silicon wafers using inductively coupled PECVD
    Vijay Kumar S.Jatti, T.P.Singh and Ravi Sekhar, Symbiosis Institute of Technology, Pune, India

    Improving lubrication of EDM oil at higher shear rate and temperature with carbon nanotubes
    Balram Tripathi and B. Ravindra and Y.M. Joshi, S S Jain Subodh (PG) College Jaipur, Indian Institute of Technology, Jodhpur, India, Indian Institute of Technology, Kanpur, India


    SESSION 1C3:
    APPLICATIONS OF PARTICLE TECHNOLOGY


    WORKSHOP:
    Application of powder technology to detection of fingerprints on crime scene evidence
    G.S. Sodhi, S.G.T.B. Khalsa College, Delhi, India

    WORKSHOP:
    Nanoparticle synthesis, characterization, engineering applications: present challenges and future developments
    Coordinators: Dr. Bonamali Pal and Dr. Bhupinder Chudasama, Thapar University, India (in collaboration with subject experts


    DAY 2

    INVITED EXPERT LECTURES

    Recent advances in long distance belt conveyors
    Gabriel Lodewijks, Delft University of Technology, Netherlands

    Using threshold velocities to determine flow regime maps for pneumatic conveying
    Haim Kalman, Ben-Gurion University of the Negev, Israel

    Discrete element simulation of granular and multiphase flows
    Navid Mostoufi, University of Tehran, Iran

    Modelling milling processes
    Avy Levy, Ben-Gurion University of the Negev, Israel

    Imaging applied to particles and particles Systems characterization: fundamentals
    Giuseppe Bonifazi and Silvia Serranti, University of Rome, Italy

    Nucleophile induced reversible dissolution of metal in aqueous surfactant solution: an astounding conclusion
    Tarasankar Pal, Indian Institute of Technology, Kharagpur, India



    SESSION 2A1:
    BULK SOLIDS HANDLING AND PROCESSING


    WORKSHOP:
    Conveyor dynamics
    Gabriel Lodewijks, Delft University of Technology, Netherlands


    Session 2A2:
    Bulk Solids Handling and Processing


    WORKSHOP:
    Bulk material storage facilities – design and management considerations
    Peter Wypych, University of Wollongong, Australia



    SESSION 2B1:
    PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION


    Chemical imaging applied to particles and particles Systems characterization: case studies
    Giuseppe Bonifazi and Silvia Serranti, University of Rome, Italy

    Facile synthesis of anisotropic Au nanostructures by laser irradiation and study their optical and electro-kinetic properties
    Bonamali Pal and Rupinder Kaur, Thapar University, India

    Magnetic properties of nano-structured Co and Ni synthesized by modified NaBH4 reduction route
    Shankar B. Dalavi and Rabi N. Panda, BITS Pilani, Goa, India

    Effect of processing variables on WC nanoparticles synthesized by solvothermal route
    Gourav Singla, K. Singh and O. P. Pandey, Thapar University, India

    A simple aqueous solution based chemical methodology for preparation of mesoporous alumina: efficient adsorbent for defluoridation of water
    Desagani Dayananda, Venkateswara Rao Sarva, Sivankutty Vadakkethonippurathu Prasad, Jayaraman Arunachalam, Narendra Nath Ghosh, BITS Pilani, Goa, Bhabha Atomic Research Centre, Hyderabad, India, National Institute for Interdisciplinary Science and Technology (NIIST-CSIR), Kerala, India


    SESSION 2B2:
    PARTICLE MECHANICS AND SIMULATION


    Effect of dune formation on pressure drop in horizontal pneumatic conveying system
    Ajay B. Makwana, Ramjee Korada and Manaswita Bose, Indian Institute of Technology, Bombay, India

    An investigation on flow pattern and velocity fields in a two dimensional flat bottomed rectangular silo with central and off-centre discharge
    Sanjay K. Sardar, Ritwik Maiti, Prasanta K. Das and Gargi Das, Indian Institute of Technology, Kharagpur, India

    CFD simulation for hydrodynamic behaviour of fine particles in a fluidized bed
    P. Sahoo and A. Sahoo, National Institute of Technology, Rourkela, India

    CFD analysis of hydrodynamic behavior in FC crystallizer
    Anis Bakhsh and H. M. Jena, National Institute of Technology, Rourkela, India

    Numerical simulation of solid liquid two-phase flow behavior in centrifugal slurry Pump
    Satish Kumar, Thapar University, India


    SESSION 2C1:
    FLUIDIZATION AND GRANULAR FLOW


    Optimizing granulating fluid levels in high shear wet granulation using wet mass rheology
    S. Arelly, S. Priyadarshini, A. Haque, H. Verma, R. Gandhi*, K. Venkatesh, Dr. Reddy's Laboratories Ltd.

    Pressure drop and gas holdup studies in a spout-fluid bed
    Sujan Kumar B and Venu Vinod A, National Institute of Technology, Warangal, India

    Effects of physical and mechanical properties on fluidized bed drying of rajma seed
    S. Jena and A. Sahoo, National Institute of Technology, Rourkela, India

    Studies on parameter optimization for particle growth in a fluidized bed granulator: interval halving method
    Abanti Sahoo and Lisa Sahoo, National Institute of Technology, Rourkela, India

    Segregation in horizontally shaken binary granular mixtures in Christmas-tree channel
    Ashish Bhateja, Ishan Sharma and Jayant K Singh, Indian Institute of Technology, Kanpur, India


    SESSION 2C2:
    APPLICATIONS OF PARTICLE TECHNOLOGY


    Hot deformation behaviour of Aluminium composite produced through powder metallurgy route
    A. Rajeshkannan, University of the South Pacific, Laucala Campus, Fiji

    A novel multipurpose powder/small particle composition for detection of fingerprints on a legion of crime scenes
    G.S. Sodhi and Jasjeet Kaur, S.G.T.B. Khalsa College, Shaheed Rajguru College of Applied Sciences for Women, Delhi, India

    Sol gel derived hierarchially porous granular ceramics and aerogels for multifunctional applications
    Linsha Vazayal, K.V. Mahesh and S. Ananthakumar, National Institute for Interdisciplinary Science and Technology, Kerala, India

    AC and DC conductivity studies on lead free ceramics:Sr1-xCaxBi4Ti4O15(x=0, 0.2 to 0.8)
    Gagan Anand, Ajay Vasishth, Piyush Kuchhal and P. Sarah, University of Petroleum and Energy Studies, Dehradun, India

    Development of closed-cell aluminum composite foams
    Suresh Kumar, Ranvir Singh Panwar and O. P. Pandey, Thapar University, India


    DAY 3


    INVITED EXPERT LECTURES


    Some fundamental aspects of the rheology of dense granular materials
    Prabhu R. Nott, Indian Institute of Science, Bangalore, India

    Re-interpretation of fluidization
    Xianfeng Fan, University of Edinburgh, UK

    Energy saving pneumatic conveying of bulk solids
    Arika Rinoshika, Yamagata University, Japan

    The significant parameter for the production of nanoparticles by stirred media milling
    B. Pitchumani, Institute of Technology, New Delhi, India

    Modelling dense-phase pneumatic conveying of bulk solids
    Chandana Ratnayake, Tel-Tek Institute, Norway

    Recent advances in pipe conveyor technology
    Renhu Pan, Fujian Longking Company, China


    SESSION 3A1:
    BULK SOLIDS HANDLING AND PROCESSING



    WORKSHOP:
    Ash handling systems in thermal power plants
    Renhu Pan, Fujian Longking Company, China

    SESSION 3A2: BULK SOLIDS HANDLING AND PROCESSING

    Understanding powder caking as a consequence of a range of mechanisms by means of powder rheometry
    Tim Freeman, Nishil Malde and Yogin Chandorkar, Freeman Technology, UK and Aimil India

    Coal blending for Indian power plants –a case study
    Dipta Sundar Mallick, Development Consultants Private Limited, Kolkata, India

    Bulk hydraulic disposal of fly ash slurry at high solids concentrations
    P. K. Senapati and B. K. Mishra, CSIR-IIMT, Bhubaneswar

    Blinded T-bends flow patterns in pneumatic conveying systems
    Nir Santo and Haim Kalman, Ben-Gurion University of the Negev, Israel

    Powder consolidation – why it is a problem and how to solve it
    Nilay Shah, Brookfield Engineering USA


    SESSION 3B1:
    PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION


    Enhanced stability, conductance and catalytic activity of gold nanoparticles via oxidative dissolution by KMnO4
    Anila Monga and Bonamali Pa, Thapar University, India

    Effect of pH on synthesis of single phase Titania (TiO2) nanoparticles and its characterization
    G. Sarala Devi K. Shanth Kumar, Indian Institute of Chemical Technology, Hyderabad, India

    Processing and characterization of plasma spray coatings of glass micro-spheres premixed with Al2O3 particles
    Gaurav Gupta and Alok Satapathy, National Institute of Technology, Rourkela, India

    Morphological study of carbon nanoparticles synthesized at high temperature and pressure
    Mani Mahajan, K. Singh and O. P. Pandey, Thapar University, India


    SESSION 3B2:
    PARTICLE SYNTHESIS, PROPERTIES AND CHARACTERIZATION


    Effect of thermal treatment on morphology and photocatalytic activity of fe-impregnated sodium titanate nanotubes
    Inderpreet S. Grover, Satnam Singh and Bonamali Pal, Thapar University, India

    Photocatalytic degradation of Janus Green B using TiO2 nanoparticles synthesized by sol gel method
    Pooja Singla, Manoj Sharma, O.P. Pandey and K. Singh, Sri Guru Granth Sahib World University, Thapar University, India

    Development of gypsum powder admixture for exterior wall plaster
    Sudhir K. Singh, Thapar University, Patiala, India


    SESSION 3C1:
    APPLICATIONS OF PARTICLE TECHNOLOGY


    Improvement of aerated discharge rate of cohesive powders by nano-coating
    Sanat Chandra Maiti, Vikram Karde and Chinmay Ghoroi, Indian Institute of Technology, Gandhinagar, India

    Experimental investigation of magnetic field assisted EDM with powders mixed in dielectric
    Geeta Bhatt, Ajay Batish, Anirban Bhattacharya, Thapar University, India

    Epoxy composites filled with micro-sized AlN particles for microelectronic applications
    Alok Agrawal, Alok Satapathy, National Institute of Technology, Rourkela, India

    Study of broken glass granules to find cause of failure of windshield automobiles glass
    Bhupinder Kaur and O.P. Pandey, Thapar University, India

    Mineralogical studies of fly ash that acts as a soil ameliorant in agriculture
    Rajinder Kaur and Dinesh Goyal, Thapar University, India


    SESSION 3C2:
    APPLICATIONS OF PARTICLE TECHNOLOGY


    High sensitivity and selective response of ZnO: Nb2O5 nanocomposite based hydrogen gas sensor
    G.Sarala Devi, P. Siva Prasad Reddy and K. Ramya, Indian Institute of Chemical Technology, Hyderabad, India

    Development of plasma spray coatings using Linz-Donawitz (LD) slag particles
    Pravat Ranjan Pati and Alok Satapathy, National Institute of Technology, Rourkela, India

    Powder mixed dielectric: an approach for improved process performance in EDM
    Ajay Batish, Anirban Bhattacharya and Naveen Kumar, Thapar University, India

    Effect of different ceramic particle on the sliding wear behavior of Al-Si alloy composites
    Ranvir Singh Panwar, Suresh Kumar, O.P. Pandey, Thapar University, India

    Effect of vortex finder diameter on flow field and collection efficiency of cyclone separators
    L.S. Brar, R.P. Sharma and R. Dwivedi, BIT Mesra, Ranchi


    You find the complete Program as PDF in the attachment below.


    Regards,

    S.S.Mallick
    PGBSIA 2013 Conference Organizing Secretary

    --
    -----------------------------------------------------
    Dr. S.S.Mallick, Assistant Professor
    Department of Mechanical Engineering
    Thapar University,Patiala, Punjab - 147004, INDIA
    Phone (office): +91 0175 239 3364, Mobile: +91 9592697176
    Email: ssmallick@thapar.edu, soumyasuddha@gmail.com
    Web: http://www.thapar.edu/facultyDetail....d=40&facId=312
    Attached Files Attached Files

Similar Threads

  1. PGBSIA 2013: List of Papers
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 2
    Last Post: 13th August 2013, 5:19
  2. PGBSIA 2013 India (Nov. 2013)
    By ssmallick in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 10
    Last Post: 8th June 2013, 9:45
  3. POWTECH 2013: Final Report
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 26th April 2013, 19:31
  4. List: Expert lectures and workshops at pgbsia (india, november 2013)
    By ssmallick in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 17th February 2013, 3:56
  5. Final Moisture of Raw Meal
    By Calvin.wck in forum Drying Technology
    Replies: 0
    Last Post: 29th December 2009, 2:50

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO