Results 1 to 5 of 5

Thread: Designing a Chain Conveyor

  1. #1
    Author Guest

    Designing a Chain Conveyor

    Hi Everybody,

    I am interested in designing a chain conveyor of a very short length (2.5 m) and width 1.2 m . Can anybody help me in designing this sequentially. i.e., how to start and proceed further

    Regards,

    Mohammed Assadullah
    asadullahasad@rediffmail.com

  2. Hello Mohammed Assadullah,

    Please inform the following details for enabling to respond to the subject matter.

    1) Material name
    2) Material bulk density, size, temperature etc.
    3) Capacity MTPH
    4) Inclination
    5) Name of plant (whether Cement Plant, Fertilizer Plant, Power Plant etc)
    6) Method of feeding.

    Whether the conveyor is also to act as a feeder?

    Regards,
    Ishwar G Mulani.
    Author of Book : Engineering Science and Application Design for Belt Conveyor.
    Email : parimul@pn2.vsnl.net.in
    Tel.: 0091 (0)20 5882916

  3. Hello Mr. Mohammed Assadullah:

    As Mr. Mulani has indicated, more information is required. What product is being carried? Do you want this to be a single strand or two strand conveyor? What environmental conditions apply (i.e. a chain conveyor in a foundry may have to withstand high heat and high abrassion; a chain conveyor in a paint shop may have to withstand chemical attack, and a chain conveyor in a processing plant will likely be run under ambient conditions). Also, what speeds are required?

    As far as design is concerned, your first step will be to calculate the chain pull. From this, you can determine the drive requirement, sprocket size, etc. Your carry and return run designs will depend on the type of chain used. And the take-up will normally be a screw type.

    Regards,
    Dave Miller
    ADM Consulting
    10668 Newbury Ave., N.W.,
    Uniontown, Ohio 44685 USA
    Tel: 001 330 265 5881
    FAX: 001 330 494 1704
    E-mail: admconsulting@cs.com

  4. Conveyor

    Sir:

    We can assist with conveyor design either from the USA or from the UK.

    Chris Robinson
    John King Inc

  5. #5
    You need to look in the Conveyor Design Handbook from the Reynolds Chain website.

Similar Threads

  1. Designing a Spiral Conveyor
    By keebar2001 in forum Company News
    Replies: 5
    Last Post: 2nd November 2009, 17:01
  2. Designing a Roller Conveyor
    By mehdimaleki77 in forum Mechanical Conveying
    Replies: 1
    Last Post: 29th May 2006, 8:18
  3. Designing a Slate Conveyor
    By naveen in forum Mechanical Conveying
    Replies: 6
    Last Post: 10th April 2006, 13:47
  4. Designing a Simple Chain Conveyor
    By naveen in forum Mechanical Conveying
    Replies: 2
    Last Post: 9th April 2006, 17:11
  5. Designing a Chain Conveyor
    By Micha in forum Mechanical Conveying
    Replies: 3
    Last Post: 1st April 2006, 13:36

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO