Results 1 to 2 of 2

Thread: High Temperature Lagging

  1. #1
    jmorrish Guest

    High Temperature Lagging

    HI All,

    I am looking for a product reccomendation for the bonding of Butyl rubber lagging on belt bucket elevators to the steel backing segments.

    The lagger (Sandvik) used a product called 3811 whihc worked very well..hwoever, this is no longer available.

    We are having trouble with the bonding glue for the rubber - the temp is 120oC normal and 140oC short term maximum.

    The rubber is hot vulcanised onto the steel segments.

    Thanks


    James Morrish
    Australia.

  2. James,

    Contact Blair Rubber for possible solutions. They provide rubber lining materials and the cements that go with them. Butyl and EPDM require special adhesives and Blair is an industry leader in this area.

    They be be reached through their web site at www.blairrubber.com

    Regards,
    Dave Miller
    ADM Consulting
    10668 Newbury Ave., N.W.,
    Uniontown, Ohio 44685 USA
    Tel: 001 330 265 5881
    FAX: 001 330 494 1704
    E-mail: admconsulting@cs.com

Similar Threads

  1. High Temperature (>400° C) Conveyors
    By Chris K in forum Mechanical Conveying
    Replies: 6
    Last Post: 5th October 2012, 13:33
  2. High Pressure and High Temperature Classification
    By Todd Danielczyk in forum Dust Control & Suppression
    Replies: 0
    Last Post: 11th July 2007, 22:29
  3. High-Temperature Material
    By dita in forum Wear & Abrasion Problems
    Replies: 3
    Last Post: 7th July 2005, 5:48
  4. Drive Pulley Lagging with High Powers
    By Matt Croker in forum Trough Belt Conveying
    Replies: 6
    Last Post: 3rd May 2005, 0:33
  5. High Temperature Belt Splicing
    By Wally in forum Trough Belt Conveying
    Replies: 10
    Last Post: 14th July 2004, 14:38

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO