Results 1 to 3 of 3

Thread: Coal Mill Reject Conveying

  1. #1
    girish Guest

    Coal mill reject conveying

    Respected sir

    I am working on conveying coal mill reject of size approx below 40mm with a distance of 100- 130m to elevation of 12-13m.

    Is it appropriate to say that coal mill reject can be conveyed in dense phase.

    Would sholud be solid/air ratio,bulk mean velocity and conveying pressure for conveying mill reject.

    Any literature, if avaiable,may be please be informed.

    My email id :

  2. #2
    Dennis Hauch - Freeport, TX, USA Guest

    Coal Conveying


    Particle size distribution (PSD) is key to this application. If the PSD is wide, it is possible that dense-phase conveyance may work. If the PSD is narrow and the D50 > 20 - 25 MM, neither dense-phase nor dilute-phase would represent viable solutions. I would suggest that a test program undertaken with a global supplier such as Coperion-Waeschle or Zeppelin would establish the dense-phase conveying potential.

    Short of a pneumatic test program, it would seem that the coal would be an ideal candidate for a drag-disk conveyor. I would recommend Schrage Rohrkettensystem GmbH.


    Dennis Hauch

  3. #3
    Peter Wypych

    Peter Wypych

    Professor and Engineer

    University of Wollongong

    University of Wollongong

    Professional Experience 34 Years / 0 Month Peter Wypych has 34 Years and 0 Month professional experience

    Discussions 5 Peter Wypych acceded to 5 discussions, Publications 0 Peter Wypych Wypych released 0 publications

    Know-How Pneumatic Conveying (12) Peter Wypych used this tag 12 times, Filtration (1) Peter Wypych used this tag 1 times, Bulk Materials Handling (1) Peter Wypych used this tag 1 times

    We have dense-phase conveyed sub 50 mm crushed coal quite successfully over such distances. However, the success does depend largely on consistency of coal size and moisture (as well as required tonnage rate). If these parameters can be controlled to acceptable limits, then you can dense-phase convey such materials. The largest dense-phase coal system that we have been involed with (design/test/optimisation) involved 40 to 50 t/h over 200 m with a 60 m lift.

Similar Threads

  1. New Coal Mill for Redcar Coal
    By Author in forum New Orders Awarded
    Replies: 0
    Last Post: 24th May 2012, 14:19
  2. Height of Mill Reject Vessel
    By ansoni in forum Pneumatic Conveying
    Replies: 0
    Last Post: 16th March 2010, 7:33
  3. Sag Mill Reject Crusher
    By mohandes in forum Size Reduction & Comminution
    Replies: 4
    Last Post: 6th November 2009, 10:55
  4. Used Vertical Coal Mill 27t/h
    By TimHuecking in forum Used & Refurbished Equipment
    Replies: 0
    Last Post: 13th July 2009, 10:08
  5. Conveying Coal - Pneumatic vs. Trough Belt Conveying
    By sanjugun in forum Pneumatic Conveying
    Replies: 5
    Last Post: 16th December 2007, 12:41

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Single Sign On provided by vBSSO