Results 1 to 8 of 8

Thread: Ash Handling Problem

  1. #1
    Daryl Guest

    Enquiry on the powder Handling of ash

    I have a problems of transfering the ash to the mixer abt 5m away.Is anyone able to suggest whether should used a vaccum system for transfering as we want a portable type.

  2. #2
    jeje66 Guest
    We, the KSE Group in the Netherlands, are supplier of machines and solutions of powder handling and turnkey projectpartner. You can obtain more information at www.kse.nl

    We do have a lot of know-how in respect to handling, storing, dosing, transporting, etc. of powders and granulates. I could be of help for you on advising on a special pneumatical conveying system, puls-phase transport, using sending vessels at 2-3 bar working pressure. The sendingvessel can be made movable and because of the nature of the transport under circumstances it might be possible to apply tubing instead of piping.

    For discharging fly ash we also have different possibilities (slides, screws, circle feeder), depending on the process spesifics and material behavior. If you are interested in what we have to offer, please inform me with details: jjan@kse.nl
    If you give me a postal adress i could also send you more information.

    Kind regards,

    Joost Jansma

  3. #3
    A very simple and inexpensive solution is using a "wand" type vacuum conveyor. These are available from several vendors and sell for less than $1,000.

    Regards,

    Amrit Agarwal (Tim)
    Pneumatic Conveying Consultants
    www.powderandbulk/pcc.com
    polypcc@aol.com

  4. #4
    gahernandez Guest

    Ash transport

    I suggest to you don’t do that with air, look for a mechanical device (screw), because when you put air into the ash its become difficult to handle, and when you use air you need a dedusting system, the air systems are expensive because you need produce pressured air with a compressor or a vacuum pump.

    Best regards

    Guillermo

  5. #5
    It is feasible to use a portable vacuum conveying system, it is also possible to use a mobile Floveyor for the application. You would need to provide your required transfer rate and useage rate per hour.
    GPM (Australia) Pty. Ltd.can provide you with this and other equipment and you are invited to view our web site at www.gpmaustralia.com.au

    Kind regards,
    James Bellew - Melbourne Office

  6. #6
    Eric Tan Guest

    Ash Handling

    Dear Daryl
    We are from Clyde materials handlings and are specialists in ash handlings.
    We have done almost 60% of ash handlings in China .and also back in Europe.
    Please email to me your enquiries or call me on my mobile 65 9669 3833

  7. POWDER HANDLING OF ASH

    DEAR DARYL,

    PLEASE GIVE US SOME MORE DETAILS FOR THE INSTALLATION FOR TRANSPORT OF ASH. WE CAN SUPPLY YOU A PORTABLE TYPE.
    WE ALSO ARE SPECIALIST FOR SILOS AND DISCHARGE EQUIPMENT SUITABLE FOR ASH.
    PLEASE VISIT OUR WEBSITE AND CONTACT US FOR FURTHER DEVELOPMENT OF A COOPERATION. WWW.IPT-ONLINE.COM.

    BEST REGARDS
    IPT

  8. #8
    Join Date
    Apr 02
    Posts
    12
    Daryl, transfer of fly ash can easily be done by vibrating floor. Do take a look at silexport.com, and send us details at silexport@wanadoo.fr. We will reply promptly.
    Jean-Claude Poncet

Similar Threads

  1. Replies: 0
    Last Post: 1st December 2014, 15:17
  2. Rheology Problem
    By Raphaelmartinez in forum General Aspects
    Replies: 1
    Last Post: 23rd March 2013, 1:56
  3. Ingredient Handling Problem
    By Author in forum Case Studies
    Replies: 0
    Last Post: 23rd February 2009, 16:57
  4. Handling Loss in Material Handling
    By rekhawar in forum Trough Belt Conveying
    Replies: 9
    Last Post: 6th June 2005, 13:36
  5. Loading Problem
    By waloni in forum Trough Belt Conveying
    Replies: 7
    Last Post: 7th September 2004, 15:52

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO