Results 1 to 6 of 6

Thread: Crushing Nickel Concentrate

  1. #1
    ian Guest

    Crushing Nickel Concentrate

    I'm interested if anyone has had any good results with a product to crush nickel concentrate.

  2. Nickel Crushing

    Ian,

    Can you give some details of the starting size, required final size, and throughput rate so we can advise accordingly?

  3. #3
    ian Guest
    Starting size will be a possible 36 inches which needs to get reduced to 6 inch minus. The compressive strength is somewhere around 40 psi. Through-put is not a great concern. Just something that will handle the lumps, at a low capacity is fine.

  4. Nickel concentrate Crusher

    Ian do you still require a machine for this application we can supply Twin Roll Machines which may be of interest

    Web address www.anglo-crushers.8m.net

    Regards

    Simon Pearson

    Tel +44 1484 543300

  5. #5
    Adi_Mogilevsky Guest

    Dry Powder classification

    We could classify dry powders, including Nickel
    TriboClassifierTM
    The TriboClassifierTM developed and patented ( USA # 6,439,394 B1 and # 6,095,965 ) by “SorTech Separation Technologies LTD” uses a new technology for dry bulk powder process separation and classification.

    TriboClassifierTM uses a rotating conical bowl and has a surface roughness and rotational speed calculated to best suit the particular classification requirement.

    The TriboClassifierTM is fully enclosed with a small footprint, a very modest power requirement and can process powder at the rate of several kilograms to tons per hour.

    SorTech has developed a novel classification process based on triboclassification. The Triboclassifier™ utilized the principal that, if a particle is moving over a surface whose roughness is comparable to the particle size, the apparent coefficient of friction depends on particle size.

    The TriboClassifierTM is suitable now for bulk powder with mean particle sizes in the range of 10µm to 300µm.


    The company’s experience, earned through extensive research and development on a variety of materials and with different separation objectives, shows that the Triboclassifer can provide solutions to many existing problems.


    Adi Mogilevsky, Mr., MBA
    Marketing Director
    Sortech Separation Technologies Ltd..
    5 Keryat Mada St.
    Har Hotzvim Technology Park
    Jerusalem, Israel 91450
    Mobile: +972-67-805-649
    Tel: +972-2-5870662
    Fax: +972-2-5870642
    adim@sor-tech.com
    https://edir.bulk-online.com/oldedirredirect/201418.htm
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	machine photo.jpg 
Views:	291 
Size:	17.7 KB 
ID:	104  

  6. #6
    Join Date
    Jun 03
    Posts
    24

    Crusher

    Clemro Western Ltd. is a crusher manufacturer. Our jaws are used throughout Canada crushing precambrium rock in Canada's "Canadian Shield". I have attached some product information for you.

    Regards,

    Brent Wheeliker
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	psi 36x48.pub page 2.jpg 
Views:	272 
Size:	218.3 KB 
ID:	155  

Similar Threads

  1. Nickel Oxide Nanoparticles Application
    By william22 in forum Nanoparticle Technology
    Replies: 1
    Last Post: 31st July 2013, 9:33
  2. Xstrata-Nickel: Tailings Intake
    By Author in forum Case Studies
    Replies: 0
    Last Post: 21st February 2011, 19:33
  3. Gebr. Pfeiffer @ Koniambo Nickel
    By Author in forum New Products, New Orders
    Replies: 0
    Last Post: 24th April 2009, 20:26
  4. Discharging Molybdenum Concentrate
    By AHMAD REZA MADINEH in forum Silos, Hoppers, Bins, Bunkers & Domes
    Replies: 11
    Last Post: 31st March 2009, 10:14
  5. Reclaimer for Nickel Ore
    By Wakchaure in forum Stacking Blending Reclaiming
    Replies: 5
    Last Post: 21st October 2007, 3:39

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO