Results 1 to 3 of 3

Thread: Calculation of Power Requirement for Screw Conveyor

  1. #1

    how to calculate the power for a screw conveyor

    Dir Sir, I want to kown how to calculate power for a screw conveyor. Could you give me a formula for it? If my parameter is screw pitch is 400mm, diameter of the screw blade is 400mm,the srew rotary revolution is 40 rpm.the capacity of the device is 25 cube meter per hour, degree of filling is 50% and the inclination angle is 3 degree. is there parameter enough?Could you give the formula to show how the power is calculated. Thank you very much.

  2. screw conveyor calculation

    Dear Sir,

    You give a lot of data but a very important one is missing: The type of the product. For calculating a screw conveyor (and other bulk conveyors) you can download our free calculation program. Send an e-mail to sales@jh.nl and we will give you the details.
    You can also do it directly on our website www.jh.nl (bulk conveyors )

    Good luck with it.

    Jur Lommerts
    =================
    Jansen & Heuning Bulk Handling Systems
    The Netherlands
    www.jh.nl

  3. Screw Conveyor Power

    It would also be useful to know the conveyor length. Power calculations for screw conveyors are available from CEMA publications and many web sites of conveyor manufacturers. These are invariably based on empirical data, but suffice for general use unless special circumstances arise. I would suggest adopting some caution about using formula without a basic inderstanding of the bulk material properties and how duty requirements may affect performance when specialised suppliers operate in todays very competitive conditions.

Similar Threads

  1. Horse Power Calculation of Drag Conveyor
    By afsaneh_782009 in forum Trough Belt Conveying
    Replies: 1
    Last Post: 19th June 2010, 10:31
  2. Conveyor Motor Power Calculation
    By Analysis in forum Trough Belt Conveying
    Replies: 2
    Last Post: 7th December 2009, 16:48
  3. Screw Conveyor Calculation
    By ali_nadar in forum Solutions for Screws, Segregation & Solids Flow
    Replies: 2
    Last Post: 14th August 2009, 13:30
  4. Pipe Conveyor Power Requirement
    By long650101 in forum Pipe Belt Conveying
    Replies: 9
    Last Post: 1st November 2005, 14:31
  5. Screw Conveyor Requirement
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 13
    Last Post: 29th May 2003, 17:16

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO