Results 1 to 10 of 10

Thread: Punta Chungo - Minera Los Pelambres Port Facilities

  1. #1
    Author Guest

    Punta Chungo - Minera Los Pelambres Port Facilities

    Punta Chungo - Minera Los Pelambres Port facilities,
    cleaning and copper concentrate recovery system

    Our company is developinig above project.

    This system shall be erected under a turn key contract (including design, enginiering, equipment and materials supply, construction and start-up).

    Do you have a rep or dealer in Chile whom we can contact?

    If you have any questions, please contact me.

    Best regards,

    Carlos Arellano C.
    Gerencia de Ingenierìa
    Grupo Ahumada
    Directo 445 2107
    Mobil 09-432 7960
    Fax 445 2123

    Ahumada 11, 11 th floor
    Santiago, Chile

    carellano@pelambres.cl

  2. #2

    Punta Chungo, cleaning and copper concentrate recovery system

    Dear Sir,

    We are interested in what contributions we can make to the success of your project. We are not in a position to offer a turnkey system but we offer innovative conveying equipment that could prove advantageous, especially for elevating bulk mateials at high angles. This will save plant space.

    We offer the DSI Snake Sandwich High-Angle conveyor for all of your high-angle conveying needs. Additionally, for very tight spaces, we offer, through partnership, the Snake EL Series (for lower through-put rates).

    Please visit our website, http://www.dossantosintl.com , to view the high-tech products and services of Dos Santos International.

    Joseph A. Dos Santos PE

  3. #3
    Steve Davis

    Steve Davis, B.Eng., P.Eng., CEng, CPEng, FIMechE, FIEAust

    Technical Director

    WorleyParsons Canada

    WorleyParsons Canada
    Good Day Carlos
    I have passed your details to our Chilean office in Santiago.

    Our contact is Cesare Celle
    Hatch
    San Sebastian 2839
    9th Floor, Las Condos

    02 430 2609

    Regards Steve Davis
    Consultant Materials Handling

  4. #4
    agoyle Guest

    gear boxes

    we can offer you shaft mounted speed reducers and transmission products for yoour project
    We do not have an office in chile
    contact us at
    involute tooling corporation
    13 jorbagh
    new-delhi
    110003
    email : involute@vsnl.com

  5. #5
    s.sen Guest
    Dear Mr. Carlos: We are an engineering & manufacturing industry. Products covering almost all the sectors.
    Could you please tell us or send us relevant informations/ technical scope abot this project; so that we may identify our business interest & inform you accordingly.We dont have any office in Chile.

    You may visit our website to asses our capabilities:

    www.lnthed.com
    www.larsentoubro.com

    With warm Regards

    S.se.

  6. #6
    Author Guest

    Minera Los Pelambres Port Facilities

    Dear Sir,

    Please find attached some details as first information about PROTEGO - the company and the products.

    Under the trademark PROTEGO the company Braunschweiger Flammenfilter GmbH since half a century is a competent and reliable supplier of Flame Arresters and Safety Relief Valves. We are A-grade listed at numerous major chemical and petrochemical industries for safety in storage, production, operation and handling of flammable liquids and combustible vapors and gases.

    Offering the global service is our commitment to our customers world-wide.
    Besides the "hardware" our range of supply includes all documentations including priced and unpriced bids and technical documentations. The operating manuals and maintenance instructions etc. are available in English language as a minimum. We are familiar with the corresponding standards of ANSI, general testing and inspection procedures in acc. to ASME, ASTM-materials , NFPA regulation etc. Our QA/QC is ISO 9001 certified, the environmental management certification is also certified. For many years we have been supplying valves in accordance with API 2000 and API 527. We are approved manufacturer for pressure vessels according to ASME VIII. 1 to be supplied with U-stamp.

    More information you get on our web-site at http://www.protego.com.

    We have best capabilities to participate in the bidding for your projects.

    Our local representative

    Ingenieria Desimat Ltda.
    Av. Puerto Vespucio 9670
    Lotea Industrial Puerto Santiago
    RCH- Pudahuel-Santiago
    phone: ++56 - 2 - 7 47 01 52
    fax: ++56 - 2 - 7 47 01 53
    e-mail: thebel@desimat.cl
    contact: Mr. Theodor Hebel

    is trained for technical assistance during engineering. Qualified After
    Sales Service and Maintenance is guaranteed through the local service
    stations contracted by our local rep's and trained by us.

    We are absolutely convinced that our products are competitive and offer
    advantages compared to those of the actually listed bidders - considering
    product, technical support, quality and economic aspects. PROTEGO flame
    arresters and PROTEGO pressure/vacuum relief valves do have a "high
    performance" - operationally and safety-technically.

    Where the market is open to all relevant standards for type approved flame
    arresters we present the comprehensive European standard CEN/PTB as well as the equivalent US acceptance issued by USCG, UL and FM. Detonation flame arresters have been tested successfully in accordance with the USCG standard and have been accepted. We will go on with deflagration flame arresters and endurance burning arresters in accordance with the installation requirements for end-of-line applications.

    Please do not hesitate to contact our Representative or us directly for any
    further information or assistance.

    Kind regards
    Braunschweiger Flammenfilter GmbH
    Claudia Neddermeier
    phone: ++49 - 5307 - 809 129
    fax: ++49 - 5307 - 7824
    e-mail: claudia.neddermeier@protego.de

  7. Cleaning Copper Recovery System

    Querido Chunta,

    Walinga offers a Central Vac System that may meet your requirements.

    Please contact our local representatives,
    Mr. Daniel Simonan - Haogenplast Argentina
    C.C.91 C1425FFJ-Buenos Aires
    Phone: (0054) 11 4771-8718
    (0054) 11 4832-9743
    Fax: (0054)11 4833-7716
    Celular: 15 5808-7083
    E-Mail: agri-vac@lvd.com.ar

    or in
    CHILE - 9na. y 10ma. región Ferosor Agrícola S.A.
    Los Carrera 643 - OSORNO Tel. (064)233771 Fax (064)232294
    E-MAIL: restevez@ferosor.cl

    Salutados
    Eng. Paul BROEKEMA
    WALINGA INC.
    pamb@walinga.com

  8. #8
    Author Guest

    Minera Los Pelambres Port Facilities

    Dear Mr. Arellano,

    Alexanderwerk is a machine manufacturer of compaction and granulation
    equipment. Our main task is to supply equipment and technology to convert
    powderous materials into free flowing granules. Should your process include
    such a step we shall be pleased to offer our corresponding supplies and
    services. Should you have a process flow diagram available we would like to
    see it in order to find ot wether we could be of help.

    Thanks again for your inquiry
    Yours faithfully Alexanderwerk AG
    Hendrik Thomsen

    Hendrik.Thomsen@Alexanderwerk.info

  9. #9
    Casey Price - ContiTech USA Guest

    Punta Chungo - Minera Los Pelambres Port Facilities

    Dear Sir:

    ContiTech is a manufacturer of high-performance, textile and steel cord reinforced conveyor belting. We work with all the engineering and construction firms worldwide. Perhaps we can assist you in locating a good partner for this project.

    Please advise.

    Regards,

    Casey Price

  10. #10
    Join Date
    Apr 02
    Posts
    12
    Dear Sir,

    The vibrating floor is a very palatable solution for the complete reclaiming and clean-up of silos.

    Automatic, maintenance free, very low power consumption, moderate investment cost are its main comparative advantages.

    Please do take a look at www.silexport.fr

    We shall welcome any inquiry related to your project.
    Sincerely
    Jean-Claude Poncet

Similar Threads

  1. Bulk Port Design
    By Mr. Jitesh Sahni in forum New Projects, Tenders, Inquiries
    Replies: 59
    Last Post: 14th September 2006, 14:53
  2. Bulk Port Design/Development
    By Cortex Resources Pty Ltd in forum Company News
    Replies: 1
    Last Post: 3rd September 2004, 11:59
  3. Bulk Materials Port Facilities
    By SteveDavis in forum General Aspects
    Replies: 3
    Last Post: 9th November 2001, 0:22
  4. DEEP WATER PORT - HAZIRA , INDIA
    By R. M. BHATIA in forum New Projects, Tenders, Inquiries
    Replies: 1
    Last Post: 16th November 2000, 15:55
  5. HAZIRA Deep Water Port in India
    By R. M. BHATIA in forum New Projects, Tenders, Inquiries
    Replies: 2
    Last Post: 16th November 2000, 15:38

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO