Results 1 to 5 of 5

Thread: Public Database

  1. #1
    Join Date
    Mar 02

    Public Database

    Is there a public databse for flow properties of solids? I am most interested in densites and friction factors.

  2. M. O'Rosky,

    as far as I know, there is no public database on flow properties. In some silo codes (e.g. DIN 1055 part 6) a few bulk materials with their properties are listed.

    The problem is that flow properties like bulk density and friction may vary with moisture, particle shape, chemical composition, particle size distribution and other parameters. Also the stress acting on the bulk solid is an improtant parameter, especially for fine-grained, cohesive bulk solids. Thus, the best way is to measure the properties with the bulk solid under consideration, whereby the conditions, e.g. the stress, at which the material has to be handled, should be applied.

    Best regards

    Dietmar Schulze

  3. #3
    Join Date
    Mar 02

    Solid Physical Properties

    Does the CEMA keep a database? (Conveyor Equipment Manufacturers Association) They have a classification system. If a data base does not exist is there a uniform classification system other than CEMA that can be applied to aid in design prior to testing a solid? I am familar with some early published work by Ralph Carr and Dr. A. W. Jenike. Seems that hrere should be some public data base with a classification somewhere?

  4. Dietmar is totally correct in his response. The complete range of permutations of moisture, temperature, time consolidation, size shape, distribution, etc for a single bulk solid would form a database in its own right, and whilst the data would be present, how many engineers would be able to correctly interpret and apply the resulting data? Where would any liability for error be focussed? It is not sufficient to simply access data, but it is vital that the application and ramifications are also well understood by practising engineers. Simply getting a convergence right on a vessel is only the start of obtaining reliable operation - vessels need to be tailored to specific applications and modes of operation in many cases.

    The cost of obtaining flow characteristics for materials is tiny compared to the cost of remedial work after a piece of equipment has been designed and installed.


    Richard Farnish


  5. #5
    Join Date
    Mar 02



    Thanks for your insight and expansion on the difficulties of bulk solids property classification.

    I just thought that someone would have compiled a list(database) of properties of each solid under some standard condition of temperature pressure and moisture. I would have thought it would have included 1. Particle properties: surface area, porosity, surface characteristics, electrostatic charging, hardness, shape, hygroscopicity and specific gravity. 2. Bulk Properties: bulk density(dynamic,loose,packed) compressibility, porosity,particle size distribution, angle of repose, angle of fall, angle or slide, floodability, abrasiveness, and any other commented miscellaneous.

Similar Threads

  1. MySQL Database Problem
    By ngaymoi200808 in forum Engineering Software Aspects
    Replies: 2
    Last Post: 22nd November 2008, 15:49
  2. Chinese Database
    By srajput in forum Company News
    Replies: 0
    Last Post: 8th September 2008, 5:21
  3. Database of Shipping
    By Sergey_delta in forum Company News
    Replies: 0
    Last Post: 17th October 2007, 8:21
  4. Member Database
    By Gary Blenkhorn in forum General Aspects
    Replies: 2
    Last Post: 23rd August 2005, 12:06
  5. Asia Cement Public Co. Ltd. Inquiry
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 0
    Last Post: 2nd July 2002, 9:17

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Single Sign On provided by vBSSO