Results 1 to 2 of 2

Thread: A/2000 Silos, Hopper, Bins & Domes Vols. I-IV

  1. #1
    Dr. Reinhard H. Whlbier
    Online Services Dr. Wohlbier

    Professional Experience 51 Years / 11 Month Dr. Reinhard H. Whlbier has 51 Years and 11 Month professional experience

    Discussions 9673 Dr. Reinhard H. Whlbier acceded to 9673 discussions, Articles 909 Dr. Reinhard H. Whlbier wrote 909 articles, Publications 1 Dr. Reinhard H. Whlbier Whlbier released 1 publications

    Searching Information (2552) Dr. Reinhard H. Whlbier used this tag 2552 times, Articles (42) Dr. Reinhard H. Whlbier used this tag 42 times, Videos

    Know-How Marketing (1131) Dr. Reinhard H. Whlbier used this tag 1131 times, Bulk Solids Handling (536) Dr. Reinhard H. Whlbier used this tag 536 times, Powder Processing (11) Dr. Reinhard H. Whlbier used this tag 11 times

    Posted by Reinhard H. Wohlbier on September 07, 1999 at 08:32:09:

    Manager, Sales & Marketing
    Manager, Engineering & Development


    In early 2000 the third generation of our
    "Best of..." books will be published,
    and for the first time the many valuable article of
    our "powder handling & processing" 1989 - 1997
    will be included.

    You may be interested in placing your advertisement in
    these volumes or you may want to order these books at
    an attractive 35% discount pre-publication price = US$ 32.50 per volume.
    (valid if ordered and paid before Dec. 15, 1999).

    In case or interest, please contact me soon at the numbers
    given at the bottom.

    "The Best of powder & bulk solids handling & processing":
    Silos, Hoppers, Bins & Domes
    A/2000 Vols. I, II, III & IV
    ________________

    Volume I - 30 papers, 216 pages,
    Pre-Publication price per Volume
    (until Dec. 15, 99): US$ 32.50
    (US$ 50.00 later on)

    Table of Contents:

    J.R. Johanson and B.D. Cox
    Practical Solutions to Fine Powder Handling
    1

    C. Calil, Jr. and G. Haaker
    Overpressure Coefficients in
    Silos with Funnel Flow
    7

    I.A.S.Z. Peschl
    Equipment for the Measurement of
    Mechanical Properties of Bulk Materials
    13

    I.A.S.Z. Peschl
    Measurement and Evaluation of
    Mechanical Properties of Powders
    23

    G.E. Blight
    Behaviour of a Bolted Corrugated
    Steel Grain Silo
    31

    A.G. McLean
    Empirical Description of
    Wall Friction Angle Variations
    39

    G.O. Rowlands, R. Delpak and S.N. Wersching
    A Transducer for Measuring Normal
    and Shear Stresses
    45

    J. Horabik and M. Molenda
    Effects of Moisture Content on
    Friction of Wheat Grain
    51

    W.E Muir, D.S. Jayas, et al.
    Interdisciplinary Grain Storage Research
    55

    G.E. Blight
    Strain and Temperature Measurements
    on an Externally Stiffened Corrugated
    Steel Grain Silo
    69

    A. Borcz and H. Abd el Rahim
    A New Method to Measure Pressure
    and Temperature in Silos
    75

    R. Moriyama and T. Jotaki
    The Reduction in Pulsating Wall Pressure
    Near theTransition Point in a
    Bin by Inserting a Rod
    79

    G. Dau and F. Ebert
    A Method to Determine the Flow Behaviour
    of Moving Granular Materials
    83

    G.E. Blight
    Load and Temperature Strains of a
    Welded Plane Plate Grain SIlo
    89

    G.E. Blight
    Measured Loading on a Small Steel Grain Silo
    95

    R. Moriyama and T. Jotaki
    Reduction in the Pulsating Wall Pressure
    Near the Transition Point in a Bin by
    a Device Widening the Cylindrical Section
    101

    P.C. Arnold and Z.H. Gu
    The Effect of Permeability on the Flowrate
    of Bulk Solids from Mass-Flow Bins
    107

    G.E. Blight
    Silo Wall Friction and Wall Roughness
    113

    A. Borcz and H. Abd el Rahim
    Pressure Measurements on Cement Silos
    117

    A.V. Katalymov and U.L. Polunov
    On the Problem of Bunker Calculation
    – Part I
    125

    A.V. Katalymov and U.L. Polunov
    On the Problem of Bunker Calculation
    – Part II
    131

    G.E. Blight
    Temperature Surcharge Pressures in
    Reinforced Concrete Silos
    135

    A. Aoki and K. Watanabe
    Powder and Bulk Solids Handling in Japan
    139

    I.A.S.Z. Peschl
    New Silo Theory Based on the
    Development of Expansion Zone
    153

    G.E. Blight
    Structure-Fill Interaction in
    Steel Grain Silos
    171

    B.K. Bala
    Simulation of Temperature Changes During
    Storage of Grain Using Finite Element Method
    177

    J. Boss and A.T. Knapik
    Investigation of the Distribution of the
    Particle Movement Trajectories During
    Funnel-Flow from the Model Silo
    181

    M.A. Diez and L.A. Godoy
    Pressures in Spherical Silos During Discharge
    185

    A.H. Birks
    The Definition of Two Extreme Types
    of Bulk Solids and Their Effect of
    Stress Distribution in the Vertical
    Section of Silos
    189

    M.M. Rao and R.V.N. Sharma
    Experimental Investigations on the
    Flow Behaviour of Bulk Solids Through Chutes
    195
    ___________________


    Volume II - 35 papers, 216 pages,
    Pre-Publication price per Volume
    (until Dec. 15, 99): US$ 32.50
    (US$ 50.00 later on)

    Table of Contents:

    R.A. Bucklin, S.A. Thompson and I.J. Ross
    Comparison of Recently Introduced Design
    Guidance for Grain Storage with
    Pressure Measurements from Full-Sized Bins
    1

    S.S. Safarian and E.C. Harris
    Empirical Method for Computing Bending Moments
    in Circular Silo Walls Due to Asymmetric Flow
    9

    J.W. Carson and T.A. Royal
    Modeling the Flow of Bulk Solids
    13

    S.Smid and Z. Kabtkov
    Standard Calculation and Measurement of
    Wall Pressure in a Flat-Bottom Model Silo
    19

    G.J. Law, S.C. Negi and J.C. Jofriet
    Stress-Strain Behavior of Barley in a Model Bin
    23

    S.A. Thompson, I.J. Ross and C.V. Schwab
    Predicted Packing Factors for Whole Grains
    in Metal Grain Bins
    29

    Z.H. Gu and P.C. Arnold
    The G(F) Function for Determining the
    Geometry of Funnel Flow Bins
    35

    J. Hundrieser
    Ultrasonic Level Measurement of Fine-Grained Solids
    39

    K.S. Manjunath, S.R. de Silva and A.W. Roberts
    Homogenization of Bulk Powders in
    Plane Symmetric Silos
    45

    H. Wilms
    Blending Silos – An Overview
    55

    J.W. Carson and T.A. Royal
    In-Bin Blending Improves Process Control
    63

    Z.H. Gu, P.C. Arnold and A.G. McLean
    Permeability – A Principal Parameter for
    Predicting the Flowrate of Fine Powders
    from Mass Flow Bins
    71

    S.C. Negi, G. Rong and J.C. Jofriet
    Discrete Particle Simulation of Gravity Flow of
    Particulate Material
    77

    M. Reimbert and A. Reimbert
    Calculation of Silos and Storage Retaining Walls
    83

    G. Haaker
    Methods to Reduce Silo Pressures to Prevent Attrition
    87

    B.C. Roy
    Study of Mass Flow Rates from Side Discharged Bins
    91

    J.R. Johanson
    Boosting and Controlling Fine Powder Flow Rates
    97

    R.A. Lohnes
    Lateral Stress Ratios for Particulate Materials
    101

    D. Schulze and J. Schwedes
    Bulk Solids in the Hopper/Feeder Interface
    107

    J.-C. Poncet
    Vibrating Floors for 40 m Diameter Soybean Silos
    115

    J. Kmita
    A Study on the Self-Induced Vibration in Silos
    119

    D. Schulze and J. Schwedes
    Tests on the Application of Discharge Tubes
    125

    H.M. Haydl
    Some Practical Aspects of Concrete Silo Design
    133

    J. Bhattacharya, A.S.R. Murty and S.C. Ray
    Incorporating a Buffer Storage in a
    Longwall Mine to Improve Coal Conveying
    System Availability
    137

    J.R. Johanson
    The Johanson Indicizer™ System
    vs. the Jenike Shear Tester
    141

    G.G. Enstad and L.P. Maltby
    Flow Property Testing of Particulate Solids
    145

    G.E. Blight
    Response to Loading of Three Similar Grain Silos
    151

    J.W. Carson and D. Stuart-Dick
    Retrofits Can Correct Flow Problems
    155

    D.J. Goodwill
    Design of Dust Collection Hoppers
    161

    H. Kalman, D. Goder, M. Rivkin and G. Ben-Dor
    The Effect of the Particle-Surface
    Friction Coefficient on the Angle of Repose
    167

    G. Haaker and W.J.A Wiersma-van Schendel
    A Constant Volume Shear Tester -
    Development and Experience
    173

    L.P. Maltby and G.G. Enstad
    Unaxial Tester for Quality Control and
    Flow Property Characterization of Powders
    179

    R.N. Ojha
    Impact Forces in Design of
    Material Handling Plants and Equipment
    185

    B. Schrder
    Silo and Preparation Plant for
    Calcined Anthracite and Petroleum Coke
    191
    C. Urcelay
    New Design of a Multichamber
    Cement Clinker Silo in Spain
    195

    N.W. Richards
    Preventing the Flash Freezing of Coal
    in Silos, Hoppers and Chutes
    197
    _______________


    Volume III - 33 papers, 216 pages,
    Pre-Publication price per Volume
    (until Dec. 15, 99): US$ 32.50
    (US$ 50.00 later on)

    Table of Contents:


    G.E. Blight and M. Gohnert
    Effects of Varying Horizontal Pressure
    in Cylindrocal Silos
    1

    A. Kwade
    Determination of the Stress Ratio in
    Uniaxial Compression Tests - Part 1
    5

    A. Kwade
    Determination of the Stress Ratio in
    Uniaxial Compression Tests - Part 2
    11

    CH. Sathaiah, M. Madhusudana Rao et al
    Effect of Moisture Contrent on Flow of
    Bulk Solids Through Chutes
    17

    S.C. Negi and J.C. Jofriet
    A Comparison of Measured Pressures
    in a Farm Silo with Code Recommendations
    21

    H. Wilms
    Silo Design for Flow and Strength
    - State-of-the-Art and Research Requirements
    25

    G.E. Blight and J. Varga
    Pressure Changes Adjacent to
    Feeders During Start-Up
    31

    L. Lancelot and I. Shahrour
    Mechanical Behaviour of a
    Chemical Powder at Low Stress Levels
    35

    B.C. Roy
    Flow Patterns in Side Discharged Bins
    41

    Z.H. Gu and P.C. Arnold
    Critical Permeability for Significant Effect
    of Interstitial Air on the Flowrate f
    rom Mass Flow Bin
    49

    L. Bartholomew
    Silo Storage Systems
    55

    D.A. Craig, A.W. Roberts, K.S. Manjunath
    and S.R. de Silva
    Utilising the Impulse Response Concept to
    Predict Blending Capabilities of Silos
    61

    G.E. Blight and A.R. Halmagiu
    Measured Pressures Compared with Code Recommandations
    or a Multi-Cell Silo Storing Fly Ash
    67

    B. Levison and J. Munch-Andersen
    Shocks in Coal Silos - A Case Study
    73

    M. Kaminski and H. Hamadeh
    An Experimental Investigation of
    Funnel Flow and Wall Pressure Variation in Silos
    77

    C. Frll
    Investigation of the Segregation in Big Bins
    83

    B.C. Roy
    Flow Patterns in Side Discharged Bins
    – Funnel and Expanded Flow
    87

    E. Teunou, J. Vasseur and M. Krawczyk
    Measurement and Interpretation of Bulk Solids Angle
    of Repose for Industrial Process Design
    93

    B.C. Roy
    Flow Patterns in Side Discharges Bins –
    Density Variations within the
    In-fill Material During Discharge
    103

    T.A. Bell, B.J. Ennis, R.J. Grygo, et al.
    Practical Evaluation of the Johanson Hang-Up Indicizer
    107

    R.T. Jenkyn
    How to Calculate Thermal Loadings in Silos
    117

    D. Schulze
    The Prediction of Initial Stresses in Hoppers
    123

    J. Strusch and J. Schwedes
    The Use of Slice Element Methods for
    Calculating Insert Loads
    131

    P.G. Berrie
    Fuzzy Logic in Ultrasonic Level Measurement
    139

    G. Rombach and J. Eibl
    Granular Flow of Materials in Silos
    – Numerical Results
    143

    E. Ragneau and J.M. Aribert
    Silo Pressure Calculation:
    From a Finite Element Approach to
    Simplified Analytical Solutions
    149

    P. Wernsen, H. Altink and J.P. van Eeden
    Dome Silos: An Innovative Concept
    163

    J. Harder and A. Buchfink
    Advanced Design of Modern Cement Terminals
    167

    G.E. Blight
    Effect of Moisture on Properties
    of Grain Stored in Silos
    177

    J. Horabik, M Molenda, C.V. Schwab and I.J. Ross
    Wall and Bottom Loads in Grain Bins of
    Different Diameters
    183

    V. Askegaard and C.J. Brown
    Influence of Personal Factor on Cell Response
    When Mounting Embedded Pressure Cells
    187
    S.S. Safarian and E.C. Harris
    Not all Silo Cost-Cutting Innovations
    are Successful
    191

    D. Neuschtz
    Discharge Systems for Mixer Underhopper 195
    _______________


    Volume IV - 33 papers, 208 pages,
    Pre-Publication price per Volume
    (until Dec. 15, 99): US$ 32.50
    (US$ 50.00 later on)

    Table of Contents:


    B. Kota
    Operational Tests of Discharge Tubes with Models
    1

    R. Bhima, S. Prakash and P.S.R. Reddy
    Effect of Grinding Aids on Graphite Flotation
    7

    P. Zeeuwen
    Dust Explosion Hazards in Silos
    13

    C. Calil Jr., E.C. Araujo, F.C. Gomes
    and J.W. Barbosa do Nascimento
    Cylindrical Steel Silos:
    Study of Cases of Deformation
    17

    H. Hamadeh and M. Kaminski
    Measurement of Pressure Distribution
    Inside the Silo Model
    23

    M. Reimbert and A. Reimbert
    Characteristic Friction Angles of
    Non Cohesive Granular Materials Compared
    with the Angle of Repose
    25

    Y. Yu and P.C. Arnold
    On Hopper Geometry Interfacing with a Screw Feeder
    to Achieve Uniform Draw-Dawn Perfomance
    29

    K. Jochem and J. Schwedes
    Use of Aerated Hoppers as Discharge Aids
    - Experiments and Calculations
    37

    M. Scheibe, D. Hhne and K. Husemann
    The Feed Characteristic of a Rotary Valve
    in a Hopper Feeder System
    41

    N.E. Abriak and F. Parsy
    Experimental and Theoretical Modelisation
    of Bidimensional Flow
    49

    M. Kaminski and E. Wirska
    Modeling of Powder Flow in Silos
    with Flexible Walls
    53

    V.A. Rinaldi, L.A. Godoy and S. Fornari
    Shear Strength Behavior of Sorghum Beans
    – Experimental Results and Modeling
    59

    j. Boss and M. Tukiendorf
    Mixing of Granular Materials Using
    the Method of Funnel Flow
    65

    A.W. Roberts
    100 Years of Janssen
    69

    P.A. Langston, U. Tzn and D.M. Heyes
    Computer Simulations of Hopper Flows
    – A Design Tool or a Research and Teaching Facility?
    85

    E.T. Mitman
    Full Silo Aeration and Withdrawal Systems
    91

    A.W. Roberts
    Shock Loads in Silos
    – The ‘Silo Quaking’ Problem
    95

    G.E. Blight and A.R. Halmagiu
    Calibrating Pressure Cells to
    Measure Pressures in Silos
    107

    F.J.C. Rademacher
    On the Application of Vibratory
    Disk Feeders for Silos
    111

    H.M. Haydl
    Loads on Discharge Tunnels Under Storage Halls
    117

    H. Schlick, F. Gehbauer, A. Auchter
    and J.Gallinat
    Relationships between Flow Properties
    and the Process of Loading in Silos
    with Central Cones and Plough Feeder Discharge
    119

    D. Schulze
    Silos – Design Variants and Special Types
    127

    L.A. Godoy and S. Despradel-Almeyda
    Stress Redistributions Due to Circumferential
    Imperfections and Cracks in Vertical Silos
    135

    R.D. Marcus, W.J. Baller and P. Barthel
    The Design and Operation of the WEBA Chute
    139

    S. Newberry
    Reinforced Concrete Domes:
    The Focus of North Texas Cement’s Expansion Project
    145

    H. Feise and J. Schwedes
    Calculation of Silo Stresses and Feeder Loads
    by the Hypoplastic Material Model
    149

    G.E. Blight, A.R. Halmagiu and L. Fliss
    Measured Pressures, Temperatures and Strains
    in a 41 m Diameter Reinforced
    Concrete Tank Storing Hot Cement Clinker
    153

    C. Calil, Jr. and M.C.A.T. da Silva
    Statistical Analysis of Pressures
    in a Model Silo
    163

    N.E. Abriak
    Flow of a Granular Material Containing Inclusions
    169

    S. Kobielak and A. Klimek
    Silos Structure Design for Reduction of
    Bulk Pressures and Improvement of Bulk Material Flow
    175

    G.K. Busch
    Air-Supported Structures –
    Part I – The Basics of Air Structures
    181

    M. Hunter
    Concrete Domes – An Evaluation of
    Their Advantages and Limitations

    187

    T. Weed
    Over 1,000,000 Tons of Dome Storage
    193


    Reinhard H. Wohlbier

    http://www.bulk-online.com
    e-mail: wohlbier@bulk-online.com

  2. #2

    Re: A/2000 Silos, Hopper, Bins & Domes Vols

    Posted by Jos Roebroek on May 28, 2000 at 08:39:27:

    In Reply to: A/2000 Silos, Hopper, Bins & Domes Vols. I-IV posted by Reinhard H. Wohlbier on September 07, 1999 at 08:32:09:

    Is it still possible to order subject books?
    If yes, what do they cost?
    I live in the Netherlands/Europe.
    How can be paid?

    Thanks in advance,



Similar Threads

  1. powder silos level measurements with ultrasonics
    By Marcos M. Pimenta in forum General Aspects
    Replies: 5
    Last Post: 13th November 2000, 15:40
  2. Blockages of Woodchip Conveyors & Bins
    By Randolph Wong in forum General Aspects
    Replies: 2
    Last Post: 13th November 2000, 15:28
  3. inserts in powder silos
    By Marcos M. Pimenta in forum General Aspects
    Replies: 1
    Last Post: 13th November 2000, 9:40
  4. Powder silos containing multiple inserts
    By Ian Whitlam in forum General Aspects
    Replies: 2
    Last Post: 13th November 2000, 9:35
  5. B/2000 Stacking Blending Reclaiming
    By Author in forum General Aspects
    Replies: 0
    Last Post: 13th November 2000, 9:33

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO