Results 1 to 2 of 2

Thread: Belt Conveyor Technology - I/2000 Vols I - III

  1. #1
    Dr. Reinhard H. Whlbier
    Online Services Dr. Wohlbier

    Professional Experience 51 Years / 11 Month Dr. Reinhard H. Whlbier has 51 Years and 11 Month professional experience

    Discussions 9673 Dr. Reinhard H. Whlbier acceded to 9673 discussions, Articles 909 Dr. Reinhard H. Whlbier wrote 909 articles, Publications 1 Dr. Reinhard H. Whlbier Whlbier released 1 publications

    Searching Information (2552) Dr. Reinhard H. Whlbier used this tag 2552 times, Articles (42) Dr. Reinhard H. Whlbier used this tag 42 times, Videos

    Know-How Marketing (1131) Dr. Reinhard H. Whlbier used this tag 1131 times, Bulk Solids Handling (536) Dr. Reinhard H. Whlbier used this tag 536 times, Powder Processing (11) Dr. Reinhard H. Whlbier used this tag 11 times

    Posted by Reinhard H. Wohlbier on September 25, 1999 at 11:50:47:

    Belt Conveyor Technology - I/2000 Vols I - III


    In early 2000 the third generation of our
    "Best of powder & bulk solids handling & processing"
    books will be published.

    You may want to order these books at
    an attractive 35% discount pre-publication
    price at US$ 32.50 per volume.
    (valid if ordered and paid before Dec. 15, 1999,
    regular price later on US$ 50.00 per volume)

    or you may be interested in placing your advertisement
    in these volumes (advertising deadline: October 1, 99).

    In case or interest, please contact me at the numbers
    given at the bottom at your earliest convenience.
    Advertising deadline: October 15, 1999.


    "The Best of powder & bulk solids handling & processing":
    Belt Conveyor Technology
    I/2000 Vols. I, II, III
    ________________

    Volume I - 30 papers, 208 pages,
    Pre-Publication price per Volume
    (until Dec. 15, 99): US$ 32.50
    (US$ 50.00 later on)

    TABLE OF CONTENTS:


    J,W. Paelke
    Boston Harbor Clean-Up Project
    1

    Dos Santos, J.A.
    Sandwich Belt HACs Broad Horizons 1992
    5

    A. Harrison and A.W. Roberts
    Mechanisms of Force Transfer on
    Conveyor Belt Drive Drums
    13

    G.L. James
    Design of a 13.1 km Overland Conveyor
    23

    M. Hager and S. Bekel
    Curved Belt Conveyor with Decentralised
    Friction Wheel Drive
    31

    K.-J. Grimmer and F. Kessler
    The Design of Belt Conveyors
    with Horizontal Curves
    41

    D.S. Mallick
    An Analytical Approach to Review Conveyor
    Drive to Overcome Starting Transient
    47

    G. Barfoot
    Field Measurement of Idler Forces
    in Belt Conveying Systems
    51

    A.V. Cook
    The Rationalisation of Idler Manufacturing
    55

    G.L. James
    A Non-Destructive Test for Belt Splices
    How Good Are Your Splices?
    59

    A. Harrison
    Modern Belt Take-Ups and Their Dynamic Motion
    61

    M. Hager
    Conveyor Belt Research at the
    University of Hannover
    65

    R. Fauerbach and M. Otrebski
    The Syferfontein Overland Conveyor System
    at Sasol Secunda Plant in South Africa
    69

    J.W. Paelke
    Gold Mine Operates 203 m Vertical
    FLEXOTURN-System
    77

    J. Dos Santos
    High Angle Conveyors
    HACs from Mine to Prep Plant and Beyond
    81

    G. Weiss
    An Integrated Approach to Conveying Technology
    89

    R. Hinkelmann and U. Sander
    FLEXOPIPE - From Conveyor Belt to
    Pipe Conveyor Systems
    97

    D.W. de Boer
    The Sluis Aerobelt
    105

    L.K. Nordell
    Steel Cord Belt and Splice Construction
    109

    M. Hager and S. Tappeiner
    Additional Strain in Conveyor Belts
    Caused by Curves and Transition Geometry
    119

    G. Schulz
    Further Results in the Analysis of
    Dynamic Characteristics of Belt Conveyors
    129

    X. Qiu and V. Sethi
    A New Pulley Stress Analysis Method
    Based on Modified Transfer Matrix
    133

    K. Grabner, K.-J. Grimmer and F. Kessler
    Research into Normal-Forces Between Belt and
    Idlers at Critical Locations on the Belt
    Conveyor Track
    143

    M. Otrebski
    Attempts to Improve Start-Up-Perfomance
    of Conveyors with Booster Drives
    151

    F. Kessler, K. Grabner and , K.-J. Grimmer
    bico-Tec - A New Type of Belt Conveyor
    with Horizontal Curves
    155

    M. Hager and A. Hintz
    The Energy-Saving Design of Belts for
    Long Conveyor Systems
    163

    A.L. Roa
    Driving and Non-Driving Drum Shafts
    in Belt Conveyors (Fast Sizing)
    173

    J. W. Paelke
    The Flexowell-Pylon-Conveyor
    181

    S.Curry
    Refining Conveyor Drive Specifications
    and Operating Procedures to Cut Running
    Costs and Downtime
    191

    Volume II - 36 papers, 232 pages,
    Pre-Publication price per Volume
    (until Dec. 15, 99): US$ 32.50
    (US$ 50.00 later on)

    TABLE OF CONTENTS:

    A. Harrison
    Conveyor Upgrading and Reliability Improvement
    in Power Stations, Ports and Processing Industries
    1

    R. Fauerbach, M. Otrebski and J. Kunicki
    SIGMA - A Curved Conveyor Plant with Special Control
    5

    J.L. Page, R.S. Hamilton, G.G. Shortt
    and P. Staples
    Design of a Long Overland Conveyor with
    Tight Horizontal Curves
    13

    A.Harrison
    Limitations of Theoretical Splice Design
    for Steel Cord Belts

    23
    A.Harrison and G. Barfoot
    Steel Cord Belt Monitoring for
    Commissioning Tests and System Evaluation
    27

    J.A. Kornecki
    The First C-Loop Conveyor in Africa
    33

    L. Tingskog
    Closed Belt Conveying for Overland High
    Lift Applications
    39

    B. Broumels
    A General Overview of the Aeroconveyors
    Influence in South African Industry
    43

    H. Lieberwirth
    Design of Belt Conveyors with Horizontal Curves
    47

    A. Harrison
    Alternatives to Strain Gauging for
    Accurate Determination of Torque
    Required when Extending Belt Conveyors
    51

    J. Bhattacharya
    Monitoring Belt Conyeyor Perfomance by
    CUSUM Control Method
    53

    S. Das and A.K. Sahu
    Some Design Aspects for Selecting
    Heavy Duty Apron Feeders
    57

    J. Stewart
    Installation of Vibrating Equipment
    61

    M.P. Singh
    The Role of Drive System Technology
    in Maximizing the Perfomance and
    Economics of Long Belt Conveyors
    67

    A.B. Karanth, K. R. Rao
    and M.A. Parameswaran
    An Experimental Technique to Measure
    Creep in Conveyor Belt Drives
    75

    K. Timtner
    Peak Toeque Calculations for Backstops
    in Conveyors
    79

    A. Harrison
    Belt Vibration and Its Influence on
    Conveyor Reliability
    91

    G. Lodewijks
    On the Application of Beam Elements in
    Finite Element Models of Belt Conveyors - Part I
    97

    G. Lodewijks
    On the Application of Beam Elements in
    Finite Element Models of Belt Conveyors Part II
    107

    L.K. Nordell
    Palabora Installs Curved Transfer Chute in
    Hard Rock to Minimize Belt Cover Wear
    113

    M. Sagheer and A. witt
    An Overland Conveyor System with Horizontal
    Curves to Connect Lignite Mine to Power Plant
    119

    J.W. Paelke
    Deepest FLEXOTURN-System in North America
    123

    P.P. Kohle and D.J. Tidke
    Belt Design and Load Capacity Estimation for
    Air Supported Belt Conveyors
    127

    C.R. Deepak, A. Chattopadhyay and K.R. Rao
    An Integrated Knowledge-Based Software for
    Belt Conveyor Design
    131

    G. Lodewijks
    The Rolling Resistance of Conveyor Belts
    137

    G. Schulz
    Analysis of Belt Dynamics in Horizontal
    Curves of Long Belt Conveyors
    145

    G.J. Barfoot
    Quantifying the Effect of Idler Misalignment
    on Belt Conveyor Tracking
    151

    L.F. de Vries
    The Development of Heat-Resistant Conveyor Belts
    155

    M.P. Singh and M. Elliott
    Maximizing the Performance and Economics of
    Complex Belt Conveyors Through Integrated Design
    159

    G. Schulz
    Comparison of Drives for Long Belt Conveyors
    165

    M. Otrebski
    Influence of Motor Starting Sequence on
    Conveyor Start-Up
    171

    H. Sheiretov
    Influence of the Belt Rigidity on the Wrap Angle
    in Belt Conveyor Drives
    175

    W.-J. Kim, T.-G. Park and S.-S. Lee
    Transient Dynamic Analysis of Belt Conveyor
    System Using the Lumped Parameter Method
    179

    K. Karanth, K.R. Rao and M.A. Parameswaran
    A Systematic Approach to the Experimental
    Investigation on Two Pulley Conveyor Belt Drive
    185

    G. Schulz
    Uphill and Downhill Conveying of Important
    Mass Flows
    193

    A. Harrison
    15 years of Conveyor Belt Nondestructive Evaluation
    201

    J.W. Paelke
    Progress With Continuous Steep Angle and
    Vertical Conveying 2
    09


    Volume III - 36 papers, 240 pages,
    Pre-Publication price per Volume
    (until Dec. 15, 99): US$ 32.50
    (US$ 50.00 later on)

    TABLE OF CONTENTS:

    Harrison, A.
    Simulation of Conveyor Dynamics
    1

    M. Otrebski
    Torque Control With the Aid of Drain
    Fluid Coupling
    5

    M. Hager and J. Wiedenroth
    Studies on the Behaviour of Hose (Tube)
    Belt Conveyors
    9

    G. Schulz and F. Schneider
    Further Investigations on Belt Dynamics
    in Horizontal Curves of Belt Conveyors
    19

    H. Kalman, M. Rivkin and D. Goder
    The Maximum Inclination Angle of a
    Belt Conveyor
    23

    J.L. Pretorius
    Design of a Long Conveyor System With
    Combined Ascending and Descending Sections
    29

    B. Funke
    Transfer-Free Belt Conveying
    Also Around Curves
    37

    A.J. Surtees
    Conveyor System Commissioning, Maintenance
    and Failure Analysis Using Black Box Techniques
    43

    L.K. Nordell
    The Power of Rubber Part I
    51

    J.W. Paelke
    208 m Vertical Granite Transport
    With POCKETLIFT

    59
    R. Sickinger and R. Noel
    Dispelling the Myths of Idler Selection
    for High Capacity, High Speed
    Overland Conveyors
    63

    A. Harrison
    Lagging and Belting Shear Dynamics
    in Conveyor Belts
    69

    J.A. Dos Santos
    HACs Elevating Gold
    77

    L.J. Goldbeck and A.D. Marti
    Dust Control at Conveyor Transfer Points:
    Containment, Suppression and Collection
    83

    D.W. Blum
    Scanning Steel Cord Conveyor Belts
    With the BELT C.A.T. MDR System
    89

    R. Stough
    Technology and Know-How:
    The Keys to Effective, Reliable Longwall Haulage
    95

    R. Klug and J. Coroneos
    New Alignment-Free Gear Drive Technology
    99

    C.B. Furness
    Conveyor Belt Training and Laser Alignment
    103

    F. Dinse
    Overland Conveyor Structure for El Abra, Chile
    105

    H.-S. Han, T.-W. Park and T.-G. Park
    Analysis of a Long Belt Conveyor System Using
    the Multibody Dynamics Program
    107

    H. Grimmer and F. Kessler
    Considerations for Reducing Belt Conveyor
    Investment Costs
    115

    A.E. Maton
    Power and Capacity Review of Tubular Pipe
    and Trough Conveyors
    121

    M. Otrebski and R. Szejwallo
    Dynamic Simulation Program A Design Tool
    125

    G. Lodewijks
    Non-linear Dynamics of Belt Conveyor Systems
    131

    H. Strewick
    Observations of the Deflection Curve for
    Vertical Conveyors for Bulk Material
    143

    H. Lichter
    Advanced Drive Technology in
    Chilean Copper Mining
    147

    S. Zamorano
    Designing Conveyors in Chile
    155

    H. Wright, I. McElhinney and L. Lemmon
    Current U.K. Drive Power Formulae for
    Belt Conveyors Fact or Fiction?
    159

    K. Grabner
    Operation of the Curve-Going Belt Conveyor
    bico-TEC at Titan Cement, Greece
    163

    J.W. Paelke
    POCKETLIFT The Innovation for Steep
    Incline and Vertical Conveying
    in the Bulk Material Handling Industry
    167

    M.A. Yester
    The Basic and Cost Savings of Utilizing
    Vertical Conveyor Technology
    171

    D.J. Mavrikios and A.J. Dentsoras
    Control of Geometric Consistency and Analytical
    Tension Conveyors During Belt Conveyor Design
    183

    J.R. McGaha and J.A. Dos Santos
    Modern Continuous Haulage Systems
    and Equipment - 1997
    193

    M. Otrebski, E. Putter and M.F. Scheffer
    Improved Control of a Selenoid Valve and Drain Coupling
    205

    R.H. Horak
    Improved Idler Panel Design for Pipe Conveyors
    211

    M. Ravikumar and A. Chattopadhyay
    On the Design of Conveyor Pulley 217

    Reinhard H. Wohlbier

    http://www.bulk-online.com
    e-mail: r.wohlbier@bulk-online.com
    fax: +49 53 23 96 97 99 or +49 53 23 96 97 96



  2. #2
    TRITON FOERDERTECHNIK Guest

    Re: Belt Conveyor Technology - I/2000 Vols I - III

    Posted by TRITON FOERDERTECHNIK GmbH on December 03, 1999 at 13:53:43:

    In Reply to: Belt Conveyor Technology - I/2000 Vols I - III posted by Reinhard H. Wohlbier on September 25, 1999 at 11:50:47:

    Lieber Her Dr. Woehlbier,
    Ihre Ausgabe der Conveyor Technology kommen mir gerade recht und wir betellen sie alle drei.Unsere Lieferadresse haben sie in Ihrem Hause.
    Bei dieser Gelegenheit schicke ich Ihnen und Ihrem Hause die besten Wuensche fuer die Festtage und das kommende Jahrtausend mit allem Erfolg den Sie sich wuenschen.
    Mit den besten Gruessen, Ihr R.Fauerbach





Similar Threads

  1. Conveying Sugar on a Belt Conveyor
    By Scott Neidigh in forum General Aspects
    Replies: 6
    Last Post: 9th January 2006, 11:41
  2. Belt Conveyors(Steel v/s Nylon belt)
    By Rajesh Mendiratta in forum General Aspects
    Replies: 6
    Last Post: 1st April 2004, 15:28
  3. B/2000 Stacking Blending Reclaiming
    By Author in forum General Aspects
    Replies: 0
    Last Post: 13th November 2000, 9:33
  4. A/2000 Silos, Hopper, Bins & Domes Vols. I-IV
    By Author in forum General Aspects
    Replies: 1
    Last Post: 10th November 2000, 17:12
  5. Finite element belt conveyor models
    By Alfredo Salinas in forum General Aspects
    Replies: 2
    Last Post: 10th November 2000, 17:04

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO