Results 1 to 5 of 5

Thread: Seeking Chemical Process/Project Engineer-dry material handling

  1. #1
    Posted by Sarah Payne on April 04, 2000 at 14:23:47:

    I am an Executive Recruiter currently seeking a Chemical Process/Project Engineer for a Midwestern US specialty chemical company. Position will offer challenge and the opportunity to make an impact on this company, with duties being split between project administration and plant/process support. Strong team environment, competitive benefits, long term opportunity. Desire 3-5 years hands-on production floor experience with material handling (dry materials, powders), project and process work, and PLC's. Please inquire or send resume as soon as possible to to Sarah at spayne@phoenixsvs.com for consideration. I hope to hear from you today!



  2. #2

    Re: Seeking Chemical Process/Project Engineer-dry material handling

    Posted by CARLOS HERRERO AGUSTN on October 11, 2000 at 13:34:28:

    In Reply to: Seeking Chemical Process/Project Engineer-dry material handling posted by Sarah Payne on April 04, 2000 at 14:23:47:

    Dear Mrs. Payne
    I am writing to you after reading your post.

    I have got a degree in Chemical Engineering and have been working as a Validation Engineer (GMP compliance, FDA inspections) for the pharmaceutical industry in Barcelona. Now I am trying to move to another country because I think it is the best way to find and develop career opportunities.

    I have installed and programmed PLCs (SIEMENS S5-95U, S5-115) and SCADAs ( IBM Plantworks) and think that my background knowledge is good enough to make the most of a training period.

    If you think that this vacancy is suitable for me please, e-mail me to this address: cchhaa@terra.es.

    Thank you very much for your interest.

    Yours, Sincerely

    CARLOS HERRERO







  3. #3
    Join Date
    Nov 00
    Posts
    6

    Re: Seeking Chemical Process/Project Engineer-dry material handling. Presentation Let

    Posted by Juan David Restrepo on April 11, 2000 at 09:38:38:

    In Reply to: Seeking Chemical Process/Project Engineer-dry material handling posted by Sarah Payne on April 04, 2000 at 14:23:47:

    Juan David Restrepo
    Calle 26 # 81-23 ++ 57-4-238-8208
    Medelln, Colombia ++ 57-4-510-6400
    JUAN_DAVIDR@YAHOO.COM


    April 11th, 2000
    To whom it may concern,

    I am a highly capable degree Engineer seeking an internship for 6 months in Production Engineering. I eagerly pursue all opportunities, which fit my education and work experience. Attached is my resume for your consideration.

    I am extremely interested in a position in a multinational Company. I hope that you will find my qualifications meet or exceed your requirements.

    My resume depicts me as a Production / Engineering Professional with Research and Development Experience. I have a strong Technical / Engineering background but I am indeed a people-person. I enjoy interacting, consulting, producing and manufacturing.

    I offer the following benefits:

     Knowledge of German, Spanish and English
     Possibility to be relocated.
     Strong network in place for finances and production practices
     Understanding for Quality manufacturing procedures with international diversity this surely will benefit the most demanding global markets
     Hands-on experience with process control; training would be minimal
     Solid problem solving technical Quality skills
     International Business experience with German and Spanish companies
     Automation, Intelligent Control, Fuzzy Control, Process Control
     Knowledge in Packaging and Handling Systems
     Knowledge in International Logistics
     Knowledge in TPM (Total Productive Maintenance)

    I thank you for your time and consideration, and look forward to meeting with you soon.

    Regards,

    Juan David Restrepo





  4. #4
    Join Date
    Nov 00
    Posts
    6

    Re: Seeking Chemical Process/Project Engineer-dry material handling. Resume

    Posted by Juan David Restrepo on April 11, 2000 at 09:37:55:

    In Reply to: Seeking Chemical Process/Project Engineer-dry material handling posted by Sarah Payne on April 04, 2000 at 14:23:47:

    Juan David Restrepo
    Calle 26 # 81-23 Tel Home: ++ 57-4-238-8208
    Medelln, Colombia Tel Office: ++ 57-4-510-6400 JUAN_DAVIDR@YAHOO.COM

    Overview A high-energy, peak performing professional with over 3 years of successful experience in positions of increasing responsibility with AUDI AG in Germany, YAMAHA Motorcycles and NARE CEMENT Co in Colombia. A results-oriented, team-player with strengths in the following areas:

    - Fluent German, English and Spanish - Research and analysis
    - Compiling and evaluating data - Statistics and numbers
    - Interpersonal relations - Change management
    - Organization and time management - Training and development
    - National/International production planning - ISO 9000 application
    - Automation, Fuzzy Control, Process Control - International Logistics
    - TPM Total productive Maintenance


    Experience

    Dec 1999 to NARE CEMENT Co. Commercial Department
    Present Medelln Colombia.
    Commercial Department and Logistics Engineering
     Account executive
     Regional Lime sales

    April 1998 to Commercial Department and Logistics Engineering
    Dec 1999 to
     International Logistics Process and Projects for the cement transport..
     Benchmarking
     Knowledge in Handling Equipment
     Distribution Cost, Packaging Cost and Management cost analysis.
     Cement Packaging and shipping systems development.
     Inventory management, shipped products and national sales control program development.

    Jun 1997 to YAMAHA Motorcycles MC Cost Engineering Department
    Nov 1997 Medelln, Colombia South America
    Cost Production Engineering
     Production, Assembly and Maintenance Cost Determination.
     Paintshop Process Cost Evaluation.


    Oct. 1996 PRODIA LTDA. Engineering Department
    May 1997 Medelln, Colombia South America
     Developed item 4.6 and 4.9 from ISO 9000 for Purchasing and Process Control in a food additives company

    Jan 1996 to AUDI AG Montage and Production Department
    Jun 1996 Ingolstadt Germany.
    Staff in the Assembly Department.

     Planning and Process Engineering: Capacity Planning, Manpower Tracking,
    Benchmarking, Cost per Unit Calculation, Support for all Technology Groups
     Process Engineering: Process Control, Documentation Systems
     Product Engineering: Maintain Model Introduction Schedule, Production Trial
    Team
    Studies
    Feb. 1999 ANTIOQUIA University, Medelln, Colombia
    Sept. 1999 Diploma in Management and Finance Evaluation Project. GPA: 4.1 / 5.00

    July 4th. 1997 EAFIT University Medelln, Colombia South America
    Bachelor Production Engineer, GPA: 4.12 / 5.00
     Planning and Technological Integration at Manufacturing Companies
     Quality Control ISO 9000
     Knowledge of Pneumatics and Oil hydraulics
     Production Programming, Theory of Constraints, PERT CPM Diagram,
    Costs, MRP II
     Cost Calculation, Estimation and Analysis, Finance, Budget.
     LabVIEW, MATlab, Fuzzy, Excel, Access, Word and MS Project
     Automation.
     Logistic, Material handling, inventory control.

    Feb 1978 to German School Medelln, Colombia South America
    Dec 1991 Private high School
    GPA 8.3 / 10.0

    Awards * Scholarship granted at EAFIT University for Excellence in Math and
    Physics in 1990
    * 2 Years Participation at the Math Olympics

    Personal Guitar, Volleyball, Marketing and New Technology Readings, Community and Family Activities

    References Available upon request







  5. #5
    Bob Drasner Guest

    Reply to your inquiry

    Hello Sarah,

    I have unsuccessfully attempted to contact you through the e-mail address posted within your inquiry.

    Please contact me at indebag@mindspring.com so we can discuss this further.

Similar Threads

  1. Material Handling Standards
    By Todd Swinderman in forum General Aspects
    Replies: 3
    Last Post: 9th January 2006, 11:45
  2. Material Degradation Data in Belt Conveyors
    By Dany O. Portales in forum General Aspects
    Replies: 3
    Last Post: 9th January 2006, 10:41
  3. Measuring Moisture in a Flow of Granular Material
    By eric sandel in forum General Aspects
    Replies: 3
    Last Post: 15th December 2004, 12:07
  4. Seeking Screw Conveyor Inlet Metering Info
    By Tony Riotto in forum General Aspects
    Replies: 2
    Last Post: 10th November 2000, 16:50
  5. Zero-Speed Switches Save On Wasted Material...
    By speedswitch.com in forum General Aspects
    Replies: 0
    Last Post: 10th November 2000, 14:42

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO