Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Belt Conveyor Design

  1. #1

    conveyor design

    would anybody point out some usefull sites (free)/books having
    complete details of conveyor design especially bulk handling belt conveyors.

    Regards

    -anoop-

  2. #2
    Check out Conveyor Equipment Manufacturer's Association web site:

    http://www.cemanet.org/

    Their book "Belt Conveyors for Bulk Materials" is an excellant resource.

    There are also very good conveyor design programs that offer limited time trials for free download.

    Belt Analyst - www.overlandconveyor.com

    Beltstat - www.conveyor-dynamics.com

    Helix Delta T - www.chempute.com/deltat.htm

    Probelt - www.probelt.com


    Hope this helps

    Gary Blenkhorn

  3. Dear Shri Anoopkv,

    I have authored and published a book on belt conveyors. It is in market since last 2 and half years and has been received very well at national as well as international level. It is a comprehensive technical book for application needs in conformity with European practices. The book has 650 pages of A4 format with 358 figures, 60 tables and 59 practical examples of actual applications.

    The book information can be seen on this website itself in the Forum “Publications and Standards”. You will see book information as well as numerous worldwide messages from well -known personalities / organisation, in the Forum “Publications and Standards”. For more details about the book or its buying procedure, please communicate on following email or address:

    Ishwar G Mulani
    C1/204 Nikash Lawns,
    Sus Road, Pashan,
    Pune - 411021, INDIA

    Email : parimul@pn2.vsnl.net.in


    Regards,
    Ishwar G Mulani.
    Author of Book : Engineering Science and Application Design for Belt Conveyors.
    Advisor / Consultant for Bulk Material Handling System & Issues.
    Email : parimul@pn2.vsnl.net.in
    Tel.: 0091 (0)20 25882916

  4. #4
    Author Guest

    Belt Conveyor Technology

    Please check out the eLibrary at http://www.bulk-online.com/ELIB/index.php

    Searching for "belt conveyor" you find 98 Articles:

    Company Affiliation:***Krupp Canada Inc.
    Title of Article:***Overland Belt Conveyor System for the Transportation of Limestone
    Published in Journal:***bulk solids handling
    Year:**1999*****Volume:**19*****Number:**3*****Page:**423*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying

    Name of Author:***Alles, R., Beckmann, D.
    Company Affiliation:***Continental Gummi-Werke AG, Deutsche Kautschuk-Industrie
    Title of Article:***Calculation of Transition Lengths for Flat-to-Trough and Trough-to-Flat Sections of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1988*****Volume:**8*****Number:**1*****Page:**91*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Arnold, P.C., Hill, G.L.
    Company Affiliation:***University of Wollongong
    Title of Article:***Predicting the Discharge Trajectory from Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1990*****Volume:**10*****Number:**4*****Page:**379*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Attwood, R., Smith, B.D.
    Company Affiliation:***Kinhill Engineers Pty. Ltd.
    Title of Article:***Assessment of Air Velocity Profiles in Belt Conveyor Galleries and Their Drying Effect on Brown Coal During Transportation
    Published in Journal:***bulk solids handling
    Year:**1987*****Volume:**7*****Number:**3*****Page:**385*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Bahke, E.A.
    Company Affiliation:***University of Karlsruhe
    Title of Article:***New Developments of Belt Conveyor Systems
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**1*****Page:**135*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Bahke, T.
    Company Affiliation:***Fried. Krupp GmbH
    Title of Article:***Dimensioning and Application of Belt Conveyors with Intermediate Belt Drive (T-T System)
    Published in Journal:***bulk solids handling
    Year:**1982*****Volume:**2*****Number:**1*****Page:**47*****
    Type of Article:***Original Article
    Fields of Interest:***Computer Modelling and Analysis / Mechanical Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Bardos, A.S.
    Title of Article:***Starting Ramps of Overland (Long-Distance) Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**2000*****Volume:**20*****Number:**2*****Page:**153-157*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying

    Name of Author:***Barfoot, G.J.
    Company Affiliation:***Conveyor Technologies Ltd.
    Title of Article:***Quantifying the Effect of Idler Misalignment on Belt Conveyor Tracking
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**1*****Page:**33*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Bartsch, D., Fauerbach, R.
    Title of Article:***15 Years Oilsand Transportation by Belt Conveyor Systems - From a ManufacturerÕs Viewpoint
    Published in Journal:***bulk solids handling
    Year:**1982*****Volume:**2*****Number:**4*****Page:**733*****
    Type of Article:***Original Article
    Fields of Interest:***Mechanical Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Beckley, D.E.
    Title of Article:***Belt Conveyor Transition Geometry
    Published in Journal:***bulk solids handling
    Year:**1982*****Volume:**2*****Number:**4*****Page:**727*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Mechanical Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Beckley, D.E.
    Company Affiliation:***Conveyor Design Consultants of W.A.
    Title of Article:***The Development of Low Friction Belt Conveyors for Overland Applications
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**4*****Page:**795*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Blomberg, H. von
    Company Affiliation:***Krupp Engineering (Australia) Pty. Ltd.
    Title of Article:***Design of an Overland Belt Conveyor
    Published in Journal:***bulk solids handling
    Year:**1989*****Volume:**9*****Number:**2*****Page:**165*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Broicher, H.F.
    Title of Article:***Quality Control of Bulk Solids on Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1996*****Volume:**16*****Number:**2*****Page:**262*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying

    Name of Author:***Brunius, O., Brunius, M.
    Company Affiliation:***BruniTec AB
    Title of Article:***Dust Control and Prevention of Dust Explosions in Belt Conveyor Systems
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**2*****Page:**265*****
    Type of Article:***Original Article
    Fields of Interest:***Dust Control
    Article published in 'The Best of ...' book:***H/2000*(Environmental & Safety Aspects)

    Name of Author:***de Rooy, J., Dasgupta, P.K., Iman, S.Y.
    Company Affiliation:***Mass Flow Equipment BV and Tega India Limited
    Title of Article:***Solution for Problems at Loading Point of Belt Conveyor Systems
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**4*****Page:**618*****
    Type of Article:***Technical Note

    Name of Author:***Deepak, C.R., Chattopadhyay, A., Rao, K.R.
    Company Affiliation:***Mechanical Handling Laboratory, Madras
    Title of Article:***An Integrated Knowledge-Based Software for Belt Conveyor Design
    Published in Journal:***bulk solids handling
    Year:**1994*****Volume:**14*****Number:**4*****Page:**775*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Computer Modelling and Analysis
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Elderton, J.
    Company Affiliation:***Fluidrive Engineering Co. Ltd.
    Title of Article:***Fluid Couplings for Longwall Armoured Flexible Conveyors and for Deep Mining Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1986*****Volume:**6*****Number:**4*****Page:**743*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Mining
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Funke, H., Hartmann, K., Lauhoff, H.
    Company Affiliation:***Universität Hannover, Siemens AG, Bernhard Beumer Maschinenfabrik KG
    Title of Article:***Design and Operating Performance of a Long-Distance Belt Conveyor System with Curvilinear Simultaneous Material Transport in the Upper and Lower Strands
    Published in Journal:***bulk solids handling
    Year:**2000*****Volume:**20*****Number:**1*****Page:**45-55*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying

    Name of Author:***Funke, H., Könneker, F.K.
    Company Affiliation:***University of Hanover, Krupp Industrietechnik GmbH
    Title of Article:***Experimental Investigations and Theory for the Design of a Long Distance Belt Conveyor System
    Published in Journal:***bulk solids handling
    Year:**1988*****Volume:**8*****Number:**5*****Page:**567*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Gallegos, M., Nachtigal, C.L.
    Company Affiliation:***Kistler-Morse Corp.
    Title of Article:***Belt Conveyor Weight Measurement Using Bolt-On Strain Gage Sensors
    Published in Journal:***bulk solids handling
    Year:**1988*****Volume:**8*****Number:**4*****Page:**465*****
    Type of Article:***Original Article
    Fields of Interest:***Control and Automation / Sampling, Weighing and Proportioning
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Gallina, R.
    Company Affiliation:***Equipamentos Villares SA
    Title of Article:***Decreasing Tensions in a Belt Conveyor by Using Multiple-Pulley Drives
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**4*****Page:**829*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Gawinski, M.J.
    Company Affiliation:***Dravo Wellman Co.
    Title of Article:***Optimizing Belt Conveyor Skirt Sealing Performance: The Flexiskirt® Conveyor Skirt Seal System
    Published in Journal:***bulk solids handling
    Year:**1987*****Volume:**7*****Number:**2*****Page:**261*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Goodwin, P.J., Ramos, C.M.
    Company Affiliation:***Techni Multidiscipline Services (Pty.) Ltd.
    Title of Article:***Design of Belt Conveyors in Bulk Terminal Applications - Part I
    Published in Journal:***bulk solids handling
    Year:**1985*****Volume:**5*****Number:**5*****Page:**1061*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Bulk Port Activities
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Goodwin, P.J., Ramos, C.M.
    Company Affiliation:***Techni Multidiscipline Services (Pty) Ltd.
    Title of Article:***Design of Belt Conveyors in Bulk Terminal Applications - Part II
    Published in Journal:***bulk solids handling
    Year:**1986*****Volume:**6*****Number:**2*****Page:**327*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Bulk Port Activities
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Grabner, K., Grimmer, K-J., Kessler, F.
    Company Affiliation:***Binder+Co AG and University of Mining and Metallurgy, Leoben
    Title of Article:***Research into Normal-Forces Between Belt and Idlers at Critical Locations on the Belt Conveyor Track
    Published in Journal:***bulk solids handling
    Year:**1993*****Volume:**13*****Number:**4*****Page:**727*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part I*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Grabner, K., Kessler, F., Weber, W.
    Company Affiliation:***Binder+Co. AG, Montanuniversität Leoben and ABB Industrie GmbH Wien
    Title of Article:***Operation of the Curve-Going Belt Conveyor "bico-TEC" at Titan Cement, Greece
    Published in Journal:***bulk solids handling
    Year:**1997*****Volume:**17*****Number:**2*****Page:**266*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying / Limestone and Cement Handling
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Greune, A., Hager, M.
    Company Affiliation:***University of Hanover,
    Title of Article:***The Energy-Saving Design of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1990*****Volume:**10*****Number:**3*****Page:**245*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Grimmer, K.-J., Kessler, F.
    Company Affiliation:***University of Mining and Metallurgy, Leoben
    Title of Article:***The Design of Belt Conveyors with Horizontal Curves
    Published in Journal:***bulk solids handling
    Year:**1992*****Volume:**12*****Number:**4*****Page:**557*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part I*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Hager, M.
    Company Affiliation:***University of Hannover
    Title of Article:***Chances for Developments in Belt Conveyor Technology in Open Pit Mines
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**1*****Page:**157*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Bulk Handling in Mines
    Article published in 'The Best of ...' book:***F/94 + I/94*(Bulk Handling in Surface Mines / Belt Conveyor Technology)

    Name of Author:***Hager, M., Bekel, S.
    Company Affiliation:***Institut f. Fördertechnik, Uni Hannover and R. Stahl Fördertechnik GmbH
    Title of Article:***Curved Belt Conveyor with Decentralised Friction Wheel Drive
    Published in Journal:***bulk solids handling
    Year:**1992*****Volume:**12*****Number:**4*****Page:**547*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part I*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Hager, M., Wiedenroth, J.
    Company Affiliation:***University of Hannover and Koch Transporttechnik GmbH
    Title of Article:***Studies on the Behaviour of Hose (Tube) Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1996*****Volume:**16*****Number:**2*****Page:**173*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Halvorsen, N.M.
    Company Affiliation:***Noyes Bros. Pty. Ltd.
    Title of Article:***Computer Aided Design of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1983*****Volume:**3*****Number:**4*****Page:**757*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Hannak, H., Aigelsreiter, J.
    Company Affiliation:***Perlmooser Zementwerke AG and Binder & Co. AG
    Title of Article:***Modernization and Installation of New Belt Conveyor Plant at AustriaÕs Largest Limestone Mine
    Published in Journal:***bulk solids handling
    Year:**1989*****Volume:**9*****Number:**1*****Page:**101*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying

    Name of Author:***Harrison, A.
    Company Affiliation:***CSIRO, Australia
    Title of Article:***Future Design of Belt Conveyors Using Dynamic Analysis
    Published in Journal:***bulk solids handling
    Year:**1987*****Volume:**7*****Number:**3*****Page:**375*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Harrison, A.
    Company Affiliation:***University of Newcastle, Australia
    Title of Article:***Non-Linear Processes and Chaos in Belt Conveyor Systems
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**1*****Page:**147*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Harrison, A.
    Company Affiliation:***Conveyor Technologies Ltd.
    Title of Article:***Alternatives to Strain Gauging for Accurate Determination of Torque Required when Extending Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1994*****Volume:**14*****Number:**2*****Page:**287*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Harrison, A.
    Company Affiliation:***Scientific Solutions Inc.
    Title of Article:***Damage Assessment for Inclined and Overland Fabric Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1998*****Volume:**18*****Number:**4*****Page:**571*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying

    Name of Author:***Hellmuth, T.
    Company Affiliation:***FAM Förderanlagen Magdeburg GmbH
    Title of Article:***Closed Belt Conveyor Systems for Bulk Materials with Extreme Properties
    Published in Journal:***bulk solids handling
    Year:**2000*****Volume:**20*****Number:**3*****Page:**362-364*****
    Type of Article:***Technical note
    Fields of Interest:***Belt Conveying

    Name of Author:***Hjang Mingyun, Xia Yan
    Company Affiliation:***Dodge/Rockwell Automation, Beijing Materials Handling Research Institute
    Title of Article:***Soft Start Design Consideration for Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**2000*****Volume:**20*****Number:**2*****Page:**234-235*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying / Drive Technology

    Name of Author:***Höller, H.
    Company Affiliation:***Voith Turbo GmbH & Co. KG
    Title of Article:***Hydrodynamic Couplings in Belt Conveyor Drives for Bulk Materials
    Published in Journal:***bulk solids handling
    Year:**1998*****Volume:**18*****Number:**1*****Page:**87*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Drive Technology

    Name of Author:***Horak, R.M.
    Company Affiliation:***River Consulting, Inc.
    Title of Article:***New Calculation and Design Methods for Belt Conveyor Curves
    Published in Journal:***bulk solids handling
    Year:**1998*****Volume:**18*****Number:**3*****Page:**429*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying

    Name of Author:***Hyung-Suk Han, Tae-Won Park, Tae-Gern Park
    Company Affiliation:***Anjou University
    Title of Article:***Analysis of a Long Belt Conveyor System Using the Multibody Dynamics Program
    Published in Journal:***bulk solids handling
    Year:**1996*****Volume:**16*****Number:**4*****Page:**543*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Computer Modelling and Analysis
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Jones, R.M.
    Company Affiliation:***Jones Bardelmeier & Company, Ltd.
    Title of Article:***The Increased Use of Belt Conveyor Self-Unloading Vessels: A Coming Development in Ocean Bulk Shipping
    Published in Journal:***bulk solids handling
    Year:**1982*****Volume:**2*****Number:**3*****Page:**379*****
    Type of Article:***Original Article
    Fields of Interest:***Shiploading and Unloading Technology
    Article published in 'The Best of ...' book:***C/86*(Continuous Ship Unloading & self-Unloading ships & Vessels)

    Name of Author:***Kalman, H., Rivkin, M., Goder, D.
    Company Affiliation:***Ben-Gurion University of the Negev and Dead Sea Works Ltd.
    Title of Article:***The Maximum Inclination Angle of a Belt Conveyor
    Published in Journal:***bulk solids handling
    Year:**1996*****Volume:**16*****Number:**2*****Page:**187*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Kasturi, T.S.
    Company Affiliation:***Jay Kay Engineers & Consultants
    Title of Article:***Trackshifting of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**4*****Page:**612*****
    Type of Article:***Technical Note

    Name of Author:***Kessler, F., Grabner, K., Grimmer, K.-J.
    Company Affiliation:***University of Mining and Metallurgy, Leoben and Binder+Co. AG
    Title of Article:***"bico-Tec" - A New Type of Belt Conveyor with Horizontal Curves
    Published in Journal:***bulk solids handling
    Year:**1993*****Volume:**13*****Number:**4*****Page:**741*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part I*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Kessler, F., Grimmer, K.-J.
    Company Affiliation:***University of Leoben
    Title of Article:***Considerations for Reducing Belt ConveyorInvestment Costs
    Published in Journal:***bulk solids handling
    Year:**1997*****Volume:**17*****Number:**1*****Page:**41*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Kim, W.-J., Park, T.-G., Lee, S.-S.
    Company Affiliation:***Samsung Heavy Industries Co. Ltd.
    Title of Article:***Transient Dynamic Analysis of Belt Conveyor System Using the Lumped Parameter Method
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**4*****Page:**573*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***King, T.J.
    Company Affiliation:***University of Witwatersrand
    Title of Article:***Belt Conveyor Pulley Design - Why the Failures?
    Published in Journal:***bulk solids handling
    Year:**1986*****Volume:**6*****Number:**2*****Page:**339*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Klüpfel, O.
    Company Affiliation:***Interplan Internationales Planungsbüro für Förder- und Lagertechnik GmbH
    Title of Article:***Belt Conveyors of the Future
    Published in Journal:***bulk solids handling
    Year:**1981*****Volume:**1*****Number:**3*****Page:**441*****
    Type of Article:***Original Article
    Fields of Interest:***Mechanical Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Klüpfel, O.
    Company Affiliation:***F.E. Schulte Strathaus GmbH & Co. KG
    Title of Article:***State-of-the-Art Belt Conveyor Systems With Horizontal and Vertical Curves
    Published in Journal:***bulk solids handling
    Year:**1998*****Volume:**18*****Number:**1*****Page:**59*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying

    Name of Author:***Kogan, J.
    Company Affiliation:***Israel Institute of Technology
    Title of Article:***Moveable Suspended Belt Conveyors for Overburden Transport in Open Pit Mines
    Published in Journal:***bulk solids handling
    Year:**1983*****Volume:**3*****Number:**3*****Page:**491*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Bulk Handling in Mines
    Article published in 'The Best of ...' book:***F/86*(Bulk Handling in Open Pit Mines & Quarries)

    Name of Author:***Kolhe, P.P., Tidke, D.J.
    Company Affiliation:***Yeshwantroa Chavan College of Engineering and Visvesvaraya Reg. College of Engineering
    Title of Article:***Belt Design and Load Capacity Estimation for Air Supported Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1994*****Volume:**14*****Number:**4*****Page:**755*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Korzen, Z.
    Company Affiliation:***Technical University of Wroclaw
    Title of Article:***The Dynamics of Bulk Solids Flow on Impact Plates of Belt Conveyor Systems
    Published in Journal:***bulk solids handling
    Year:**1988*****Volume:**8*****Number:**6*****Page:**689*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Korzen, Z.
    Company Affiliation:***Technical University of Wroclaw
    Title of Article:***Mechanics of Belt Conveyor Discharge Process as Affected by Air Drag
    Published in Journal:***bulk solids handling
    Year:**1989*****Volume:**9*****Number:**3*****Page:**289*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Korzen, Z.
    Company Affiliation:***Technical University of Wroclaw
    Title of Article:***Mechanics of Bulk Solid Stream Flow in Throwing Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1990*****Volume:**10*****Number:**1*****Page:**55*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Kumar, M.
    Company Affiliation:***"Kumar Consulting"
    Title of Article:***Rail Belt Conveyor
    Published in Journal:***bulk solids handling
    Year:**1998*****Volume:**18*****Number:**2*****Page:**274*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying

    Name of Author:***Legner, K.-H.
    Company Affiliation:***HOSCH-Fördertechnik GmbH
    Title of Article:***Improving the Economy of Belt Conveyors with Special Reference to Belt Scrapers
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**4*****Page:**905*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Lewis, R.K.
    Company Affiliation:***The Goodyear Tire & Rubber Co.
    Title of Article:***S.A.T. - The New Stretch-A-Trough Belt Conveyor System
    Published in Journal:***bulk solids handling
    Year:**1986*****Volume:**6*****Number:**2*****Page:**295*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Liebe, N.
    Company Affiliation:***Krupp Industrietechnik
    Title of Article:***Direct Transfer Between Railway and Belt Conveyor
    Published in Journal:***bulk solids handling
    Year:**1990*****Volume:**10*****Number:**1*****Page:**39*****
    Type of Article:***Original Article
    Fields of Interest:***Bulk Handling in Mines
    Article published in 'The Best of ...' book:***F/94 + I/94*(Bulk Handling in Surface Mines / Belt Conveyor Technology)

    Name of Author:***Lieberwirth, H.
    Company Affiliation:***Krupp Fördertechnik GmbH
    Title of Article:***Design of Belt Conveyors with Horizontal Curves
    Published in Journal:***bulk solids handling
    Year:**1994*****Volume:**14*****Number:**2*****Page:**283*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Lodewijks, G.
    Company Affiliation:***Technical University of Delft
    Title of Article:***On the Appplication of Beam Elements in Finite Element Models of Belt Conveyors - Part I
    Published in Journal:***bulk solids handling
    Year:**1994*****Volume:**14*****Number:**4*****Page:**729*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Lodewijks, G.
    Company Affiliation:***Technical University of Delft
    Title of Article:***On the Application of Beam Elements in Finite Element Models of Belt Conveyors - Part II
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**4*****Page:**587*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Lodewijks, G.
    Company Affiliation:***Conveyor Dynamics Inc.
    Title of Article:***Non-Linear Dynamics of Belt Conveyor Systems
    Published in Journal:***bulk solids handling
    Year:**1997*****Volume:**17*****Number:**1*****Page:**57*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Lodewijks, G.
    Company Affiliation:***Conveyor Experts BV
    Title of Article:***The Design of High Speed Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1999*****Volume:**19*****Number:**4*****Page:**463*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying

    Name of Author:***Lodewijks, G.
    Company Affiliation:***Conveyor Experts BV
    Title of Article:***Research and Development in Closed Belt Conveyor Systems.
    Published in Journal:***bulk solids handling
    Year:**2000*****Volume:**20*****Number:**4*****Page:**465-470*****
    Type of Article:***Main article
    Fields of Interest:***Belt Conveying

    Name of Author:***Mavrikios, D.J., Dentsoras, A.J.
    Company Affiliation:***University of Patras
    Title of Article:***Control of Geometric Consistency and Analytical Tension Calculations During Belt Conveyor Design
    Published in Journal:***bulk solids handling
    Year:**1997*****Volume:**17*****Number:**3*****Page:**369*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Computer Modelling and Analysis
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***McGaha, J.R., Roberts, B.M.
    Company Affiliation:***Continental Conveyor & Equipment Co.
    Title of Article:***Overland Belt Conveyors Prove Their Worth in Massive Seven Oaks Dam Project
    Published in Journal:***bulk solids handling
    Year:**1999*****Volume:**19*****Number:**1*****Page:**108*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying

    Name of Author:***Nassi, G.
    Company Affiliation:***Sautelma
    Title of Article:***Continuous Weighing on Belt Conveyors - The End of a Myth
    Published in Journal:***bulk solids handling
    Year:**1990*****Volume:**10*****Number:**3*****Page:**327*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Sampling, Weighing and Proportioning

    Name of Author:***Nordell, L.K.
    Company Affiliation:***Conveyor Dynamics Inc.
    Title of Article:***The Channar 20 km Overland - A Flagship of Modern Belt Conveyor Technology
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**4*****Page:**781*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Nordell, L.K., Qiu, X., Sethi, V.
    Title of Article:***Belt Conveyor Steel Cord Splice Analysis USING Finite Element Methods
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**4*****Page:**863*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Computer Modelling and Analysis
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Ramos, C.M.
    Company Affiliation:***Techni Multidiscipline Services (Pty.) Ltd
    Title of Article:***Coal Transportation and Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1988*****Volume:**8*****Number:**3*****Page:**297*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Coal Handling
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Continued on next post -

  5. #5
    Author Guest

    Continuation eLibrary References

    Name of Author:***Rappen, A.
    Company Affiliation:***VSR Engineering GmbH
    Title of Article:***Systematic Cleaning of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1984*****Volume:**4*****Number:**1*****Page:**115*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Rappen, A.
    Company Affiliation:***VSR Engineering GmbH
    Title of Article:***Breaking a Lance for the Hose Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1990*****Volume:**10*****Number:**3*****Page:**297*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Read, G.
    Title of Article:***Air Supported Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1985*****Volume:**5*****Number:**5*****Page:**1071*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Roa, A.L.
    Title of Article:***Driving and Non-Driving Drum Shafts in Belt Conveyors (Fast Sizing)
    Published in Journal:***bulk solids handling
    Year:**1993*****Volume:**13*****Number:**4*****Page:**759*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part I*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Roa, A. Lopez
    Company Affiliation:***STHIM Maquinaria SA
    Title of Article:***Fast Selection Method for Ball Bearings for Belt Conveyor Upper Rollers
    Published in Journal:***bulk solids handling
    Year:**1996*****Volume:**16*****Number:**4*****Page:**623*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying

    Name of Author:***Roberts, A.W., Harrison, A., Hayes, J.W.
    Company Affiliation:***University of Newcastle, Australia and CSIRO
    Title of Article:***Economic Factors Relating to the Design of Belt Conveyors For Long Distance Transportation of Bulk Solids
    Published in Journal:***bulk solids handling
    Year:**1985*****Volume:**5*****Number:**6*****Page:**1143*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Sahara, K., Kuroda, Y.
    Company Affiliation:***Kawasaki Heavy Industries, Ltd.
    Title of Article:***Test Run of a 3 m Wide, 30,000t/h Capacity Belt Conveyor
    Published in Journal:***bulk solids handling
    Year:**1985*****Volume:**5*****Number:**3*****Page:**599*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying

    Name of Author:***Schlecht, B., Wünsch, D.
    Company Affiliation:***University of Duisburg
    Title of Article:***Measuring the Operating Stress in Pocket-Belt Conveyors - Development and Design of the Instrumentation
    Published in Journal:***bulk solids handling
    Year:**1990*****Volume:**10*****Number:**4*****Page:**399*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Mechanical Conveying / Research and Development
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Schulz, G.
    Title of Article:***Further Results in the Analysis of Dynamic Characteristics of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1993*****Volume:**13*****Number:**4*****Page:**705*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part I*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Schulz, G.
    Company Affiliation:***Krupp Fördertechnik GmbH
    Title of Article:***Analysis of Belt Dynamics in Horizontal Curves of Long Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**1*****Page:**25*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Schulz, G.
    Company Affiliation:***Krupp Fördertechnik GmbH
    Title of Article:***Comparison of Drives for Long Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**2*****Page:**247*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Schulz, G., Schneider, F.
    Company Affiliation:***Krupp Fördertechnik GmbH
    Title of Article:***Further Investigations on Belt Dynamics in Horizontal Curves of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1996*****Volume:**16*****Number:**2*****Page:**183*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Sheiretov, H.
    Company Affiliation:***University of Mining and Geology, Sofia
    Title of Article:***Influence of the Belt Rigidity on the Wrap Angle in Belt Conveyor Drives
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**2*****Page:**257*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Singh, M.P.
    Company Affiliation:***Dodge Group ‹ Reliance Electric Company
    Title of Article:***The Role of Drive System Technology in Maximizing the Perfomance and Economics of Long Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1994*****Volume:**14*****Number:**4*****Page:**695*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Singh, M.P., Elliott, M.
    Company Affiliation:***Dodge Group ‹ Reliance Electric Company and Australian Conveyor Engineering Pty. Ltd.
    Title of Article:***Maximizing the Performance and Economics of Complex Belt Conveyors Through Integrated Design
    Published in Journal:***bulk solids handling
    Year:**1995*****Volume:**15*****Number:**2*****Page:**239*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/2000 Part II*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Spaans, C.
    Company Affiliation:***Technical University of Delft
    Title of Article:***The Calculation of the Main Resistance of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**4*****Page:**809*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Research and Development
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Spilker, E.C., Albers, T.J., Lordi, A.C.
    Company Affiliation:***Bendy Engineering Company
    Title of Article:***Technical Aspects of Overland Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1983*****Volume:**3*****Number:**2*****Page:**311*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Mechanical Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Sur, S.
    Company Affiliation:***Buckau Wolf India Ltd.
    Title of Article:***Dual Drives for Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1987*****Volume:**7*****Number:**4*****Page:**509*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Suverkrop, D.
    Company Affiliation:***Creative Engineering (USA)
    Title of Article:***Spillage - Belt Conveyors' Biggest Cost
    Published in Journal:***bulk solids handling
    Year:**2000*****Volume:**20*****Number:**2*****Page:**232-233*****
    Type of Article:***Technical Note
    Fields of Interest:***Belt Conveying / Dust Control

    Name of Author:***Tingskog, L.
    Company Affiliation:***Conveytech Systems AB
    Title of Article:***Will the Universal Belt Conveyor Revolutionize Bulk Shiploadhandling?
    Published in Journal:***bulk solids handling
    Year:**1992*****Volume:**12*****Number:**3*****Page:**415*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Shiploading and Unloading Technology
    Article published in 'The Best of ...' book:***C/2000*(Bulk Ports - Shiploading & Unloading)

    Name of Author:***Tooker, G.E.
    Company Affiliation:***Fluor Engineers Inc.
    Title of Article:***Using Horizontal Curves to Optimize the Alignment of Belt Conveyors
    Published in Journal:***bulk solids handling
    Year:**1984*****Volume:**4*****Number:**4*****Page:**855*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Weigel, T.
    Company Affiliation:***PHB Weserhütte AG
    Title of Article:***The Use of Intermediate Drive Units for Belt Conveyor Systems
    Published in Journal:***bulk solids handling
    Year:**1982*****Volume:**2*****Number:**1*****Page:**53*****
    Type of Article:***Original Article
    Fields of Interest:***Mechanical Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Name of Author:***Wright, H., McElhinney, I., Lemmon, L.
    Company Affiliation:***Dr. H. Wright & Assoc. and National Power plc
    Title of Article:***Current U.K. Drive Power Formulae for Belt Conveyors - Fact or Friction?
    Published in Journal:***bulk solids handling
    Year:**1997*****Volume:**17*****Number:**2*****Page:**201*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Drive Technology / Standards and Practices
    Article published in 'The Best of ...' book:***I/2000 Part III*(Belt Conveyor Technology - Parts I, II & III)

    Name of Author:***Wünsch, D., Schlecht, B.
    Company Affiliation:***University of Duisburg
    Title of Article:***Discharge of Pocket-Belt Conveyors - Theory and Experiment
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**4*****Page:**913*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Wünsch, D., Schlecht, B., Ertl, W.
    Company Affiliation:***University of Duisburg and IMF Ingenieurgesellschaft für Maschinenbau u. Förderanlagen
    Title of Article:***The Pocket-Belt Conveyor - A Vertical Conveyor for the Cement Industry
    Published in Journal:***bulk solids handling
    Year:**1991*****Volume:**11*****Number:**2*****Page:**477*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying / Limestone and Cement Handling
    Article published in 'The Best of ...' book:***I/94*(Belt Conveyor Technology)

    Name of Author:***Zür, T.W.
    Company Affiliation:***Technical University of Wroclaw
    Title of Article:***Viscoelastic Properties of Conveyor Belts - Modelling of Vibration Phenomena in Belt Conveyors during Starting and Stopping
    Published in Journal:***bulk solids handling
    Year:**1986*****Volume:**6*****Number:**3*****Page:**553*****
    Type of Article:***Original Article
    Fields of Interest:***Belt Conveying
    Article published in 'The Best of ...' book:***I/86*(Conveyor Belt Technology)

    Please check out the eLibrary at http://www.bulk-online.com/ELIB/index.php

    You can order each article, please visit above URL.

    Good luck,

    Reinhard Wohlbier

  6. #6
    I visited URL You wrote but I couldn't order the article, I want :
    Name of Author: Harrison, A.
    Company Affiliation: CSIRO, Australia
    Title of Article: Future Design of Belt Conveyors Using Dynamic Analysis
    Published in Journal: bulk solids handling
    Year: 1987 Volume: 7 Number: 3 Page: 375
    Type of Article: Original Article
    Fields of Interest: Belt Conveying
    Article published in 'The Best of ...' book: I/94 (Belt Conveyor Technology)
    can you help me?

  7. #7
    Author Guest

    Belt Conveyor Design

    Please contact:

    marcel_droettboom@vogel-medien.de

    Regards,

    RHWohlbier

  8. #8
    i am trying to design a belt conveyor to carry 2" limestone. the capacity, distance and incline are given. the design must meet british standard specs. all components necessary for the conveyor to operate, including head chute, tail chute, drive, pulleys etc. must be specified.

    i have had no luck finding information online and am having trouble getting a hold of any relevant books. does anyone have any pointers, specifically on significant equations?

  9. Quote Originally Posted by limerick View Post
    ..... the design must meet british standard specs. .....

    .... does anyone have any pointers, specifically on significant equations?
    British Standards for belt conveyors are quite irrelevant. There is a BS for calculating power consumption but its a bit long winded. There's another one for guarding, nip points & all that stuff. Have a look at the BS Handbook to find what you need. Surely the easy way is to make sure that your suppliers are working to BS & leave it to them & anybody's 9001 bit. BS, EN Scars & all!
    For the real work you need a manufacturer's handbook as published by Fenner, Dunlop, Goodyear, Martin Engineering, Continental to name few. There is a handy MHEA 'Recommended Practice for Troughed Belt Conveyors' which used to be called the 'grey book' until later editions changed the cover & it became known as the 'blue book'. I don't know what the latest colour is but it will still be called the same in longhand & won't be free.
    Why does everything have to be free? These are the tools of the trade & without them you are not even a craft apprentice.

  10. #10
    Join Date
    Mar 03
    Posts
    1,641
    Quote Originally Posted by louispanjang View Post
    Why does everything have to be free? These are the tools of the trade & without them you are not even a craft apprentice.
    All those years ago when I was learning and couldn't afford a reference book I'd borrow it from the technical library. If I really needed it then I'd save up my pennies, stop drinking beer AND BUY IT.

    So many people want something for nothing.

Page 1 of 2 12 LastLast

Similar Threads

  1. Conveying Sugar on a Belt Conveyor
    By Scott Neidigh in forum General Aspects
    Replies: 6
    Last Post: 9th January 2006, 11:41
  2. Belt Conveyors(Steel v/s Nylon belt)
    By Rajesh Mendiratta in forum General Aspects
    Replies: 6
    Last Post: 1st April 2004, 15:28
  3. Conveyor Belt Technology book
    By I G Mulani in forum General Aspects
    Replies: 1
    Last Post: 13th November 2000, 15:20
  4. Finite element belt conveyor models
    By Alfredo Salinas in forum General Aspects
    Replies: 2
    Last Post: 10th November 2000, 17:04
  5. Conveyor Design and Operational Problems
    By Alex Harrison in forum General Aspects
    Replies: 0
    Last Post: 10th November 2000, 14:24

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO