Results 1 to 6 of 6

Thread: Manufacturers of eqpt/ Sources Required

  1. Posted by KS Dilip on June 21, 1999 at 00:29:29:

    Sir/ Madam,
    Please provide email addresses/ web sites of companies manufacturing
    Paddle feeders for handling Lignite of capacity 2000 TPH
    for a project in India. We need four nos of the same to be delivered in 10 months from date of order.
    Please send information by email
    Thanks and regards
    Dilip
    Fenner India Limited
    PH +91 44 822 0810/ 826 7766
    Fax: +91 44 826 5462
    EMAIL : fennermhd@vsnl.com





  2. Re: Manufacturers of eqpt/ Sources Required

    Posted by Steve Smith on April 10, 2000 at 10:51:55:

    In Reply to: Manufacturers of eqpt/ Sources Required posted by KS Dilip on June 21, 1999 at 00:29:29:

    For your reference, we design, manufacture and automate complete
    material handling systems and equipment, such as belt conveyors,
    stackers, shiploaders and trippers.

    Demar Conveying Systems
    6200 Savoy Drive, Suite 800
    Houston, Texas 77036
    713/963-0930 Phone
    713/963-0838 Fax
    http://www.demar-conveyors.com



  3. #3

    Re: Manufacturers of eqpt/ Sources Required

    Posted by Marty Tomlinson, VP marketing on September 06, 2000 at 09:33:46:

    In Reply to: Re: Manufacturers of eqpt/ Sources Required posted by Steve Smith on April 10, 2000 at 10:51:55:

    Uni-Facs is a mid-west supplier of conveying systems including, but not limited to the following: Belt conveyors, apron flight conveyors, storage equip. bucket elevators and associated structures.




  4. #4
    Join Date
    Nov 00
    Posts
    6

    Re: Manufacturers of eqpt/ Sources Required

    Posted by R.M.BHATIA on May 04, 2000 at 23:08:10:

    In Reply to: Re: Manufacturers of eqpt/ Sources Required posted by Steve Smith on April 10, 2000 at 10:51:55:


    Dear Sir / Madam ,

    We are the largest fully integrated manufacturers of high quality flat steel products (HRC ) in the western region of India, having production capacity 2.4 Million tonnes per Annum and located at Hazira - 394 270, India. We are also enhancing our production capacity from 2.4 to 3.0 Million M.Ton in near future.

    To cater to the need of raw materials to our HBI & HRC Unit and for export we intend to develop berthing facilities for unloading capsize vessels, about 5 Kms. distance from our plant.

    I> QUANTUM OF CARGO TO BE HANDLED PER ANNUM

    Our tentative handling for cargo movements per Annum would be as under :-

    S.No. INWARD OUTWARD Total

    1 Bulk Cargo- 8 MnT HRC 1.5 MnT
    2 Scrap 0.5 MnT

    Sub Total 8.5 MnT 1.5 MnT =10.0 MnT

    II> BERTH FACILITIES

    We would be constructing 2 berths at port to accommodate the following shipments / sizes.

    A. For Bulk Cargo.

    Ship size : 1,80,000 DWT
    Length : 300 Mtrs.
    Breadth : 50 Mtrs
    Draft : 16 Mtrs

    Cargo proposed to be handled:-

    Lump Ores, Pellets, Coal, Lime stone


    B.For Unit and General Cargo

    Ship size : 75,000 DWT
    Length : 225 Mtrs.
    Breadth : 37 Mtrs.
    Draft : 13.5 Mtrs.

    Cargo proposed to be handled:-

    HRC, Sheet Packs, Slabs & Scrap.


    III> CARGO HANDLING EQUIPMENTS

    A > SHIP UNLOADER :-

    i) For Bulk Cargo

    S.No. Description Specifcations

    1 Nominal capacity 2000 TPH
    2 Type Grab bucket - clamshell
    3 Rail Span(Approx.) 35 mtrs.
    4 Out reach(Apporx.) 40 mtrs. at seaside
    15 mtrs. at landside
    5 Lift(approx.) 50 mtrs. (approx.)
    (21 mtrs. above rail ;
    29 mtrs. below rail )
    6 Lifting 40 / 50 T (approx.)


    ii) For Unit & general Cargo

    S.No. Description Specifcations

    1 Nominal capacity 1000 TPH
    2 Type Orange peel grab for scrap / c- hook /
    sprader for HRC
    3 Rail Span(Approx.) 30 mtrs.
    4 Out reach(Apporx.) 35 mtrs. at seaside
    15 mtrs. at landside
    5 Lift(approx.) 50 mtrs. (approx.)
    (21 mtrs. above rail ;
    29 mtrs. below rail )
    6 Lifting 40 / 50 T (approx.)


    B> CONVEYORS :-

    Suitable pipe conveyors for handling above cargo, capacity - 2000 TPH - 5 K.M. Long approx.

    We would like to invite vendors :-

    1> Who can supply us cargo handling equipments namely Ship unloaders - Capacity 2000 TPH for Bulk & 6000 TPD for unit cargo.

    2> Consultants who can provide services to us for finalizing the layout, equipments selection & assist us in testing & commissioning of equipments.

    3> We would prefer vendor who can provide us services on BOOT basis i.e. Built, Operate, Owned & Transfer.

    4> Necessary electrical power will be made available at berth.

    5> On the basis of equipments selection the berth width / rail span will be finalized.

    6> The specifications stipulated for the above equipments are preliminary & tentative.

    We would request you to forward us your company profile, product range & list of such equipments supplied to various ports, under operation. Please also send your budgetory offer indicating tentative delivery schedule by E-mail / Fax / courier.

    Regards,


    R.M.BHATIA
    G.M - Material Handling,
    ESSAR STEEL LTD,
    27TH k.m. Surat Hazira road,
    Hazira - 394 270.
    DIST. SURAT. INDIA
    Fax : +91 261 882908 / 882561
    Phone : +91 261 882260 / 882290
    E-Mail : bhatia@shipping.essar.co.in



  5. Re: Manufacturers of eqpt/ Sources Required

    Posted by MATTEO PASSONI on September 13, 2000 at 09:17:31:

    In Reply to: Re: Manufacturers of eqpt/ Sources Required posted by R.M.BHATIA on May 04, 2000 at 23:08:10:

    Dear Sirs,

    please to visit our web site http://www.hti-it.com and do not esitate to contact our customer service for any needs.
    Personal Best Regards, Matteo Passoni CEO.





  6. Re: Manufacturers of eqpt/ Sources Required

    Posted by Derek Fourie on May 15, 2000 at 03:13:43:

    In Reply to: Re: Manufacturers of eqpt/ Sources Required posted by R.M.BHATIA on May 04, 2000 at 23:08:10:

    We design & manufacture the widest range of conveyor weighing & control systems, from 1 t/h through 20k t/h on belts ranging from 300 mm wide through 2400 mm wide running at speeds up to 6 m/sec.
    These weighing systems are available in single weighing idler format through untra precise 6 weighing idler designs.
    We also supply throughput bathing systems, loss-In-weight feeders, belt weigh feeders etc.
    Slurry density and mass flow measurement is also part of our prospectus.




    --------------------------------------------------------------------------------

Similar Threads

  1. Cement and Clinker Manufacturers in Russia
    By Author in forum Cement Lime Gypsum
    Replies: 13
    Last Post: 13th October 2011, 12:28
  2. Replies: 1
    Last Post: 31st August 2002, 6:30
  3. Marketing Agents or Distributors Required
    By Author in forum Representatives & Distributors
    Replies: 0
    Last Post: 12th June 2002, 15:57
  4. Post Doctoral Research Fellow Required
    By Mark Kilfoil in forum Representatives & Distributors
    Replies: 0
    Last Post: 7th June 2002, 7:59
  5. Urgent info required!!!
    By bob in forum General Aspects
    Replies: 3
    Last Post: 23rd November 2000, 16:30

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO