Results 1 to 1 of 1

Thread: POWTECH 2004: hs - Umformtechnik

  1. #1
    Author Guest

    POWTECH 2004: hs - Umformtechnik

    Stand 9-535

    PNEUMATIC CONVEYING WITH PIPINGS

    Pipe bends, couplings and pipes for pneumatic conveying systems has this
    manufacturer in the program. The thin-walled pipe bends with large bending
    radii are cold-bended free from pleats. They have only small ovality, an
    optically pleasing surface, no starting bulge, proper deburred sawn edges
    and are free from scratches and grooves. Outer diameter are possible from 38 mm to 168 mm, wall thickness of 1,5 to 5 mm and bending radii from 50 to
    1500 mm. As pipe material are used stainless steel, aluminium and steel.

    The pipe couplings for the fast and safe assembly do not require weldings
    and are simply dismantlable.Connecting pieces and pipes can be used again.
    The metal jacket is inside and outside galvanized or made of stainless
    steel. Same applies to screws and nuts. The pipe couplings are insensitive
    to pressure and impacts till 6 bar and are provided with a stainless steel
    grounding strip for the electrical conductivity. The integrated compression
    gasket made of nitril is temperatur resistant till 110 Celsius, weather-
    and alkaline solution resistant.

    For abrasive media are stainless steel or steel pipe bends in the program
    which are enamelled in the internal area. Glas pipe bends can be delivered
    for extreme operations (abrasive materials or a high throughput).

    These glas bends have in relation to the stainless steel bends a four or
    fivefold service life.

    For more information, please visit:
    http://edir.bulk-online.com/profile/...ormtechnik.htm
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	hs-umform_powtech04.jpg 
Views:	234 
Size:	23.2 KB 
ID:	578  

Similar Threads

  1. Sydney BULKEX 2004
    By Michael Nissen in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 1
    Last Post: 21st February 2004, 8:16
  2. Continuous Surface Mining Symposium 2004
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 1
    Last Post: 3rd October 2003, 12:45
  3. Powtech 2004
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 14th August 2003, 20:21
  4. 8th International Conference on Bulk Materials Handling - 2004
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 2nd May 2003, 8:56
  5. Powtech 2002
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 20th February 2002, 10:19

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO