Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Shiploader-Unloader

  1. #1
    aaosman Guest

    Shiploader-Unloader

    Dear Sirs,

    There is a turnkey project for 65.000 T of grain metallic silos consisting of silos, equipment and shiploader - unloader.

    Could you name the companies capable of providing shiploader-unloader with a capacity of 450 - 500 t/h of grain.

    I appreciate your help.

    Dr. Eng. A. A. OSMAN

  2. #2

    Shiploader-Unloader

    Dear Sir,

    Dos Santos International is the World's foremost expert in the sandwich belt high-angle conveyor technology. Our DSI Snake Sandwich Conveyor Systems could be advantageous in elevating the grain continuously to the silos. DSI Snakes could also be used to elevate the grain to the shiploader/unloader and could be used as a soft loading system. DSI Snakes offer the advantage of high angle conveying up to 90 degrees (vertical) using all conventional conveyor equipment and hardware. With DSI Snakes you may save much valuable space. Please visit our web site to learn more about Dos Santos International.

    Joseph A. Dos Santos, PE
    Dos Santos International
    531 Roselane St NW
    Suite 810
    Marietta, GA 30060
    USA
    Tel: 1 770 423 9895
    Fax 1 866 473 2252
    Email: jds@ dossantosintl.com
    Web Site: www.dossantosintl.com

  3. Dear Dr A A Osman,

    Please refer e-Directory of this website and I am sure you will find quite a few number of reputed companies in this business.

    Regards,
    Ishwar G Mulani.
    Author of Book : Engineering Science and Application Design for Belt Conveyor.
    Email : parimul@pn2.vsnl.net.in
    Tel.: 0091 (0)20 5882916

  4. #4
    Ralph M. Horak Guest

    Grain shiploading/unloading

    Dear Sir,

    Please provide additional information such as:
    1. Have you done any simulation, studies (master planning)?
    2. What is the expected yearly through put?
    3. What is the range of vessel sizes you will load/unload? (Loading/unloading Panamax vessels at the 450/500 tph nominal capacity is not economical.)
    4. Do you have any existing structures, pier, dolphins, etc?
    5. Do you have any drawings, bathometric data, etc?
    Horak Associates is currently involved in providing complete shiploading equipment including marine structures for two separate grain loading terminals each with 1,500 tph capacity for 65,000 DWT bulk carriers.

    Ralph M. Horak, President
    Horak Associate LLC
    Port Development and Bulk Materials Handling Consultants
    23 Spinnaker Lane, New Orleans, LA 70124-1657, USA
    Tel: 1 504 286 2310, Fax: 1 504 286 1413
    E-Mail: HorakAssociates1@aol.com

  5. #5
    shibajikolkata Guest
    Kolkata
    Nov 24 '03

    Dear Mr. Osman,

    I refer to your above message.

    An Indian Company named TATA ROBINS FRASER Limited (TRF Limited) is a leader in this field.

    You could contact Mr. A.K. Sinha, Vice President TRF Limited on e mail

    aks@pye.trfltd.com

    The postal address is:

    TRF Limited
    (Port & Yard Equipment Division)
    27 Shakespeare Sarani
    Kolkata
    India
    PIN Code 700017

    Fax: + 91 33 22 47 93 10
    Attn.: Mr. A.K. Sinha, Vice President

    Regards

    Shibaji Dasgupta

  6. #6
    H. Petersen Guest
    Dear Mr. Osman,

    Please sen us your contact address, so that we can contact you directly, or you send us further information about your project to
    "hp@neuero.de".

    Thank you for your efforts.

  7. #7
    veerdonk Guest
    Dear Sir,

    Figee is a reputed supplier of port equipment, including ship-unloaders. We would appreciate having further contact with you and therefore invite you to provide us with your contact details. Information about Figee and our products can can found on our website www.figee.com
    Looking forward hearing from you I remain,

    Yours sincerely,
    Figee B.V.

    Rob A.J.A. van de Veerdonk
    Commercial Director

    e-mail: veerdonk@figee.com

  8. Dear Mr. Osman
    NEUERO is a provider of ship unloaders and loaders throughout the world. Please provide the details of the project so we may reccommend the proper equipment. You can see the NEUERO equipment on the home page at www.neuero.com. or you can contact us at neuero@neuero.com.

    Best Regards;
    Scott Neidigh

  9. #9

    Shiploader-Unloader

    Dr. Eng. A. A. Osman,

    Please provide additional information on your grain handling equipment requirements. We would be pleased to provide you with a quotation.

    Information about our services and experience with dry bulk material handling systems can be found at http://www.encoeng.com.

    Regards,

    S. Harbert
    enco engineering, inc.

  10. Grain Ship unloader.

    We have already installed a FAM Germany equipment, our system is able to handle up to 700ton/ hour grain and full equipped with dust suppresion and vibration chute.

    Also during our bid process we call some companies such IMPSA and VIGAN .

    Regards.
    MAL
    Marcelo A Alonso.

Page 1 of 2 12 LastLast

Similar Threads

  1. Continuous Shipunloader -v- Grab unloader
    By HelmutMayer in forum Bulk Ports & Shipping
    Replies: 3
    Last Post: 12th July 2002, 14:36
  2. Ship Unloader for Coal
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 0
    Last Post: 10th January 2002, 8:48
  3. Continuous Ship Unloader
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 0
    Last Post: 7th August 2001, 16:17
  4. For Sale: Shiploader (bulk solids)
    By Wade Leslie in forum New Projects, Tenders, Inquiries
    Replies: 2
    Last Post: 20th November 2000, 8:14
  5. Need advice for design of articulated boom for ship unloader
    By Krithika V in forum General Aspects
    Replies: 1
    Last Post: 13th November 2000, 15:05

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO