Thread: Urgent Quotation: Ball Valve

Our Ref : 2011-EP-P-0279
Date: 18.07.2011

Dear Sir/Madam,

Hi, Good Day. I'm looking for your kindness to provide me with the
quotation for BALL VALVE. Please quote me as soon as possible. This is
**URGENT** item. Your quotation must be delivered to us on or before
19.07.2011. If you need any further questions just feel highly appreciated
to let me know, I will response promptly.

Item Quantity Unit Descriptions
00010 2 PC VALVE,BA,RF6D,2"600,CS,FB,SS

Design Standard : API 6D
Size : 2 IN (50 MM)
Pressure Designation : ASME CL 600
Material, Body : CARBON STEEL
Material, Trim : TO BE FILLED
Length, F to F : 292.1 MM
Type of Bore : FULL
Facing, Flange : RAISED FACE
Finish, Flange Facing : SMOOTH
Construction, Ball : TRUNNION SUPPORT
Mat Standard, Body & Connector: AISI 4140 (NO WELDING)
ASTM A105 NORMALISED
ASTM A350 GR LF2
ASTM A352 GR LCC
ASTM A216 GR WCB/WCC
Mat, Seal, Seat Ring : NYLON PA12 (LAURAMID)
VITON B OR GF
Material Standard, Spring : ASTM B637-UNS N07750
Type of Gasket, Body Connector: SPIRAL WOUND
Mat Standard, Gasket SPW, Wind: ASTM A240 TYPE 316L
ASTM A193 GR B7M
ASTM A194 GR 2HM
Mass : P 25
Addtl Specification Doc No : GASKET CONTACT
INSPECTION CERT REQ : 77/304 MATL
ACCEPTENCE REQ : 77/302 TEST
: 77/307 VACUUM
ACCEPTANCE
VACUUM SERVICE : 77/201 MESC
SPEC : 77/100 SURFACE
FINISH : 77/301
Additional Specification : - ASTM A105 : TO 1.20% MAX
0.25% MAX
ASTM A350 GR LF2
MANGANESE CONTENT
: 0.23% MAX
ASTM A216 GR WCB :
CARBON CONTENT -

DELIVERY DATE : 14.10.2011


NOTE: Your offer should be accompanied with
1) Official Quotations
2) Warranty Period
3) Technical Specifications
4) Data Sheet & Catalogue (Drawing)
5) Certificates belong to the offered items
6) Estimate Weight
7) FOB Port, Country of Origin
8) Freight Charges
9) Validity offer at least 90 Days
10) Delivery Point : PCSB WAREHOUSE NO.20,ASB,LABUAN

Looking forward for your quick reply!

Thank you.

With my best Regards,

NURUL 'AIN MD ALI
JUNIOR SECRETARY
ENHANCE PHASE SDN. BHD
No.3(B),2nd Floor, Section 54,
Travillion Commercial Centre,
Jalan Padungan,
93100 Kuching,Sarawak
Tel : +608-2421 004
Fax : +608-2245 004
E-mail : info@enhancephase.com

Our Ref : 2011-EP-P-0282
Date: 18.07.2011

Dear Sir/madam,

Hi, Good Day. I'm looking for your kindness to provide me with the
quotation for BALL VALVE. Please quote me as soon as possible.
This is**URGENT** item. Your quotation must be delivered to us on or
before 21.07.2011.If you need any further questions just feel highly
appreciated to let me know, I will response promptly.

Item Quantity Unit Descriptions
10 3 PC VALVE,BA,RF,6D,3"1500,CS,316,FB,MS

Design Standard : API 6D
Size : 3 IN (80 MM)
Pressure Designation : ASME CL 1500
Material, Body : CARBON STEEL
Material, Trim : STAINLESS STEEL 316
Length, F to F : 18. 1/2 IN (469.9 MM)
Type of Bore : FULL BORE
Type of Seat : METAL
Design Standard, End Flange : ASME B16.5
Facing, Flange : RAISED FACE
Finish, Flange Facing : SMOOTH
Construction, Body : ASTM A105 + ENP
Construction, Ball : TRUNNION SUPPORTED
Spec Treatm, Seat Ring : ASTM A105 + ENP
Mat Standard, Body & Connector : ASTM A105
Material Standard, Ball : ASTM A105 + ENP
Material Standard, Stem : ASTM A105 + ENP
Mat, Seal Seat Ring : ASTM A105 + ENP
INSERT : NYLON PA12
Service, Fluid : LIQUID
Temperature Limited : -29 DEG C TO 426 DEG C
Material Standard, Spring : INCONEL X750
Type of Gasket, Body Connector : SPIRAL WOUND
Mat, Packing, Stem, Gland : ASTM A105 + ENP + GRAPHITE Mat
Standard, Bolt & Nut : ASTM A194 GR 2HM



MANUFACTURER : PROTEK VALVE, UK
MODEL : VDN BTF-1500LB

Additional specification :

Lever operated and injection quill.


DELIVERY DATE : 05.10.2011


NOTE: Your offer should be accompanied with
1) Official Quotations
2) Warranty Period
3) Technical Specifications
4) Data Sheet & Catalogue (Drawing)
5) Certificates belong to the offered items
6) Estimate Weight
7) FOB Port, Country of Origin
8) Freight Charges
9) Validity offer at least 90 Days
10) Delivery Point : PCSB WAREHOUSE NO.20,ASIAN SUPPLY BASE
LABUAN F.T., MALAYSIA

Looking forward for your quick reply!

Thank you.

With my best Regards,

NURUL 'AIN MD ALI
JUNIOR SECRETARY
ENHANCE PHASE SDN. BHD
No.3(B),2nd Floor, Section 54,
Travillion Commercial Centre,
Jalan Padungan,
93100 Kuching,
Sarawak,Malaysia
Tel : +608-2421 004
Fax : +608-2245 004
E-mail : info@enhancephase.com

Our Ref : 2011-EP-S-0169
Date: 29.07.2011

Dear Sir/madam,

Hi, Good Day. I'm looking for your kindness to provide me with the
quotation for BALL VALVE. Please quote me as soon as possible. This is
**URGENT** item. Your quotation must be delivered to us on or before
10.08.2011. Please refer to the attachment for the detail. If you need any
further questions just feel highly appreciated to let me know, I will
response promptly.


NOTE: Your offer should be accompanied with
1) Official Quotations
2) Warranty Period
3) Technical Specifications
4) Data Sheet & Catalogue (Drawing)
5) Certificates belong to the offered items
6) Estimate Weight
7) FOB Port, Country of Origin
8) Freight Charges
9) Validity offer at least 60 Days
10) Delivery Point :Labuan Supply Base
Warehousse Receipt & Dispatch
Jalan Ranca-Ranca Industrial Estate
87025 Labuan
Malaysia

Looking forward for your quick reply!

Thank you.

With my best Regards,

NURUL 'AIN MD ALI
PROCUREMENT SECRETARY
ENHANCE PHASE SDN. BHD
No.3(B),2nd Floor, Section 54,
Travillion Commercial Centre,
Jalan Padungan,
93100 Kuching,
Sarawak, MALAYSIA
Tel : +608-2421 004
Fax : +608-2245 004
E-mail : info@enhancephase.com


For details, see pdf attached below.