Results 1 to 1 of 1

Thread: New K-Tron Quick Change Feeder

  1. #1
    Author Guest

    New K-Tron Quick Change Feeder

    New K-Tron Quick Change Feeder Available in Volumetric and Gravimetric Models for Quick Material Change Over of Customized Runs


    Pitman, NJ (October 23, 2003)—The K-Tron Feeder Group recently introduced the K-Tron Quick Change/ Quick Clean T35/S60 feeder. First designed with the needs of the Masterbatch industry in mind, this feeder allows the customer to quickly change from a single screw S60 screw configuration to a twin screw T35 screw configuration, as material needs change-- ideal for short customized runs. By utilizing the range and feed screw selections of the T35 and the S60 feeder models, the Quick Change feeder can handle feed rates from 0.12 cubic dm/hr (0.004 cubic ft/hr) to as high as 4,500 cubic dm/hr (160 cubic ft/hr.) depending on material density.

    The feeder is available with two bowl/ screw sets that mount to the same gearbox and can be cleaned and swapped out in minutes. It is easy to disassemble and clean, enabling quick change over in production, while minimizing down time and installation costs. It is available in both volumetric and gravimetric models.

    The Quick Change/Clean (QC) feeder is ideal for applications where only one feeder must feed a large variety of products, where a “super clean” execution is required and where product contamination is not allowed. As the process industries move to more flexible production lines for short, customized runs, the flexibility for quick changing and cleaning will become increasingly important.

    For more information please visit:
    http://edir.bulk-online.com/oldedirredirect/30333.htm

    The photo shows an operator changing over from a single screw to a twin
    screw feeder module.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	k-tron-quickchange_news.jpg 
Views:	154 
Size:	17.9 KB 
ID:	299  

Similar Threads

  1. Quick & Easy Conveyor Belt Repairs
    By globalresins in forum Repair & Maintenance Aspects
    Replies: 9
    Last Post: 19th September 2008, 14:07
  2. Accuracy of Screw Conveyor as a Feeder
    By Utkarsha Joshi in forum General Aspects
    Replies: 9
    Last Post: 28th March 2004, 22:27
  3. New K-Tron Benelux Organization
    By Author in forum People & Positions
    Replies: 0
    Last Post: 12th March 2002, 12:06
  4. Quick determination of moisture and humidity measurement
    By ACO in forum New Products, New Orders
    Replies: 0
    Last Post: 15th February 2002, 8:06
  5. Vibratory feeder control gate design
    By GregHill in forum Mechanical Conveying
    Replies: 0
    Last Post: 5th September 2001, 6:17

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO