Results 1 to 3 of 3

Thread: Venturi Design

  1. #1

    Venturi Design

    I have been looking at designing a venturi for pneumatic transportation of flocculant in mixing package.

    Are there any good sources for design on this subject?

    Has any had any experience in designing venturi and they can show me how they acheived their goal? Is it highly mathematical or have rules of thumb / practice based theory been used?

  2. Hello Sebastien,

    Design of venturis for pneumatic conveying is possible if you have experience in how powders behave. For example, the design will be influenced by mass/air ratio, particle size, geometric dimensions, velocity and so on.
    For some more information please visit our website

    http://www.enviro-engineering.de

    or send me an email. We have designed and/or sold a lot of ejectorventuris during last 15 years and are very successfull with our different customtailored types of ejectors.

    Best regards
    Klaus Schneider

  3. #3
    You can use Perry's Chemical Engineering Handbook for the design of the venturi eductors. All you are doing is converting the pressure head into a velocity head. Calculate the exit diameter of the venturi so that the velocity there is at least 10% higher than the material's saltation velocity.

    Regards,

    Amrit Agarwal (Tim)
    Pneumatic Conveying Consultants

Similar Threads

  1. Using Multiple Venturi Design
    By AJIT GOHAD in forum Vacuum Technology
    Replies: 3
    Last Post: 9th July 2012, 18:24
  2. Pulse-jet Filter Venturi Selection
    By guusvg in forum Dust Control & Suppression
    Replies: 9
    Last Post: 30th April 2011, 17:13
  3. Venturi Design for Conveying Plastic Grains
    By Author in forum Pneumatic Conveying
    Replies: 3
    Last Post: 24th January 2009, 6:06
  4. Venturi Loader
    By techno - Frontier Agriculture, U.K. in forum Pneumatic Conveying
    Replies: 2
    Last Post: 21st November 2006, 17:07
  5. Capacity Limit for Venturi Tube Ejectors
    By shenjie2004 in forum Pneumatic Conveying
    Replies: 7
    Last Post: 30th March 2006, 4:13

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO