Results 1 to 4 of 4

Thread: Iron Ore Conveyor Components

  1. #1

    Iron Ore Conveyor Components

    We are looking for various components for a new conveyor system, to be installed in the Middle East. The system is rated for 1,800 MTPH, V=2.5m/s, to handle iron ore fines and pellets of SG 2.1 to 3.2. Conveyor length is about 18m, with about 4.5m lift. The catch is that the items must be delivered to the Middle East (Qatar. UAE area) within 6-7 weeks, i.e. before 31 October. As such off-the-shelf components are required.

    Please fax or e-mail me your best price and delivery time on the following (or equivalent) items:
    MOTOR: 75HP (55kW) 440V 60Hz TEFC 3-phase squirrel-cage induction motor, rated for use in Tropical Conditions (50 deg C ambient and 100% humidity), complete with soft start mechanism, rated for marine use.

    REDUCER: Right angle shaft mounted gear reducer, nominal input speed 1800 rpm, ratio about 23.7:1, 1.5 min. AGMA service factor, complete with sufficiently sized backstop, rated for use in Tropical Conditions (50 deg C ambient and 100% humidity), synthetic oil, no cooling fan, rated for marine use.

    BELT: 1000mm wide, 4 ply heavy duty low modulus fabric conveyor belt, carcass includes 4 fabric plies plus one steel mesh breaker ply, with high abrasion resistant 9mm+3mm top and bottom covers. Strength rating must be equivalent to ST630 steel cord belt.

    BELT CLEANERS: 2x (Primary/ secondary) for 1000mm belt, blade material for use with iron ore fines and pellets, Twist-type tensioners, rated for marine use (salt water)

    BELT PLOW: 1x, V-type rubber-edged plow for 1000mm wide belt

    DRIVE TERMINAL: 630mm dia. x 1150mm with 13mm thick diamond groove rubber lagging, 1570mm bearing centers, crowned face, squeeze-lock hubs with keyed shaft, 1045 steel shaft or equivalent, SKF 22232 CCK/W33 or equivalent bearings with pillow block housings.

    DRIVE SNUB TERMINAL: 500mm dia. x 1150mm with 13mm thick plain rubber lagging, 1520mm bearing centers, crowned face, squeeze-lock hubs with keyed shaft, 1045 steel shaft or equivalent, SKF 22218 CCK/W33 or equivalent bearings with pillow block housings.

    TAIL/TAKE-UP TERMINAL: 500mm dia. x 1150mm with 13mm thick plain rubber lagging, 1520mm bearing centers, crowned face, squeeze-lock hubs with keyed shaft, 1045 steel shaft or equivalent, SKF 22218 CCK/W33 or equivalent bearings with pillow block housings.

    TROUGHING IDLERS: 12x, 35 deg. 133mm dia. steel roll fixed frame troughing idlers for 1000mm belt, 1290mm frame spacing

    IMPACT IDLERS: 6x, 35 deg. 133mm dia. moulded rubber roll fixed frame impact idlers, 1290mm frame spacing

    RETURN IDLERS: 7x, flat 133mm dia. rubber disc return idlers, 1290mm frame spacing.

    Please send details to my attention.

    L.P. Huitema, P. Eng.
    EMS-Tech Inc.
    Tel +31 251 291 340
    Fax +31 251 291 344
    E-mail europe@ems-tech.net
    Web www.ems-tech.net

    http://edir.bulk-online.com/profile/8920-ems-tech.htm

  2. #2
    We are able to supply the conveyor belt ex-stock Perth Western Australia.
    The following two options are available
    40mtr. 1000mm wide EP630/4ply - 8/2mm covers "M"
    40mtr. 1000mm wide EP750/5ply - 9/3mm covers "M"

    Regards
    Martin Long

  3. #3
    capotex Guest

    Covers for belt conveyors

    Mr. Huitema,

    In the case you need covers for this conveyor, we may supply them inmediately.

    If interested, please visit www.capotex.com or contact me.

    Javier Saura
    Export manager
    www.capotex.com

  4. #4
    Join Date
    Jan 01
    Posts
    20

    YOUR POST

    Sirs,

    We are specialized since more than 20 years by supplying to every mines and steel industries in Africa and part of Europe.
    We do have 3 specialities :

    1* Belt cleaners : we have won the jubilee of the best mining invention. We are the only one scraper giving 100% satisfactions and results on clipped belts + reversible belts + quick belts up to 8 meters/sec. Only one scraper to solve all the problems that can happen on that typical applications.

    2* Spare parts for crushers brands ALLIS CHALMERS and SYMONS/NORDBERG. We are Agent of a wonderfull Foundry in USA and have a huge stock available, ready for dispatch. Our price are between 20 and 30 % less expensive compared to OEM.

    3* All belt conveyors accessories such as impact bars, drum lagging, rubber rolls,...

    I hope to receive your comments and maybe inquiries.

    Yours,

    Grald Coenen
    MATAM S.A.
    32, Drve des Pins
    B-1420 Braine l'Alleud
    Belgique
    Tl.: +32.2.354.67.34
    Fax : +32.2.353.00.21
    E-Mail : info@matam.be
    Web Site : www.matam.be
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	photo prayon.jpg 
Views:	370 
Size:	29.6 KB 
ID:	271  
    GERALD COENEN
    Sales Department
    Address
    32, Dreve des Pins
    B-1420 Braine l'Alleud
    Belgium
    Tl.: 00-32-2-354-67-34
    Fax : 00-32-2-353-00-21
    Email : info@matam.be
    Web site : www.matam.be

Similar Threads

  1. Quotation for Conveyor Components
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 1
    Last Post: 11th February 2012, 13:29
  2. ACO Automation Components
    By ACO in forum Company News
    Replies: 1
    Last Post: 26th January 2006, 16:15
  3. Grab Unit for Scrap Iron
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 0
    Last Post: 14th January 2003, 12:06
  4. Slide Gate Inquiry for Iron Sponge Silos
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 3
    Last Post: 13th January 2003, 0:01
  5. Metering small quantities of molten iron(2-10lbs)
    By Andy in forum General Aspects
    Replies: 0
    Last Post: 21st February 2001, 4:37

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO