Results 1 to 1 of 1

Thread: Powtech 2004

  1. #1
    Author Guest

    Powtech 2004

    The place to be for decision-makers

    Europe’s exhibition for mechanical processes

    Nuremberg, July 2003. POWTECH has been one of the world’s leading trade fairs for mechanical processes for powder and bulk solids technology for years. It has long been a must event distinguished by the effective density and extremely high quality of the information offered. POWTECH 2004 takes place in the Exhibition Centre Nuremberg from 16-18 March 2004.
    Around 550 exhibitors offer the 14,000 expected trade visitors the unique opportunity to obtain compact and comprehensive information about the latest developments in powder and bulk solids technology.

    POWTECH, which is highly rated by both exhibitors and trade visitors due to its effectiveness, will again provide a complete survey of mechanical processing technologies and instrumentation. This offers outstanding information density for the trade visitors from the industrial sectors of chemicals, pharmaceuticals and food, quarrying and earthworks, ceramics, metallurgy, plastics and plant and equipment engineering on the three days of the exhibition.

    The years of success of the trade fair combination are based on:
    * the concentration on themes of key technologies,
    * the efficient communication with trade visitors from all over the world,
    * three compact days of exhibiting and
    * the synergy from the parallel trade fairs TechnoPharm and ExploRisk.

    Trade fairs as communication media are still very important. However, efficiency counts more than ever at times of economic difficulty. Here the combination of the POWTECH, TechnoPharm and ExploRisk trade fairs has made a name for itself as a high-efficiency forum for years. By exhibiting at the next edition of this trade fair combination from 16-18 March 2004, many exhibitors are laying the foundation for successful business even with economically difficult omens.

    The place to be for decision-makers
    The particularly good cost-benefit ratio is just one of the features that defines POWTECH’s role as leading trade fair for mechanical processing technologies and instrumentation. Around nine out of ten exhibitors summed up their participation favourably after POWTECH 2002, and virtually all exhibitors (96 %) provided information for international trade visitors on their stand at the exhibition.

    The products in detail
    * Basic mechanical processing technologies
    * Plant engineering and processing components
    * Particle analysis and characterization
    * Measurement and control
    * Safety and environmental technology
    * Services

    An unchanged high level of applications from exhibitors is apparent a few weeks before the start of the stand allocation. NürnbergMesse is also receiving a variety of new applications from companies wanting to profit from the success of this trade fair combination for the first time.

    PARTEC Congress again in 2004
    The top particle experts from all over the world attend the international PARTEC Congress held every 3 years. This combination is traditionally a must event for experts from the chemical, ceramic, quarrying and earthworks or plastic industries and environmental technology.

    The congress with its associated events has been extended to the Particle Week for 2004 to also allow congress participants sufficient time to visit POWTECH, the world’s leading exhibition in this field.

    Powerful exhibition trio: POWTECH, TechnoPharm and ExploRisk
    The TechnoPharm International Trade Fair for the Development, Manufacture and Analysis of Pharmaceuticals, Cosmetics, Dietary and Health Food Products will again take place at the same time as and in direct combination with POWTECH 2004. This will especially offer an exclusive information platform for companies wanting their plant, equipment and products to also reach specialists in the pharmaceutical, food and life science industries. The highlight of TechnoPharm 2004: the International Meeting of Pharmaceuticals, Biopharmaceuticals and Pharmaceutical Technology 2004.

    ExploRisk covers the whole field of explosion protection and industrial safety. This trade fair, which also takes place parallel to POWTECH 2004 and TechnoPharm 2004, substantially extends the product spectrum of the exhibition combination. Products and services for explosion protection and industrial safety complement the other two trade fairs.

    Make sure of your stand space!
    Interested companies wanting to use this highly attractive and also very efficient communication forum of trade fairs and congresses as an exhibitor should contact NürnbergMesse by not later than the end of September. Exhibitors’ special requirements can still be easily included up to this time prior to stand allocation.


    POWTECH on the Internet:
    www.powtech.de

    NürnbergMesse project team:
    Claudia Schreglmann
    Gunnar Zidella
    Tel +49 (0) 9 11. 86 06-82 80, -82 79
    Fax +49 (0) 9 11. 86 06-82 81
    powtech@nuernbergmesse.de

    Sponsor:
    GVC
    Gesellschaft Verfahrenstechnik und Chemie-
    Ingenieurwesen im Verein Deutscher
    Ingenieure (VDI)

    POWTECH press team:
    Petra Wolf
    Ariana Brandl
    Tel +49 (0)9 11. 86 06-82 85
    Fax +49 (0)9 11. 86 06-82 56
    ariana.brandl@nuernbergmesse.de




    POWTECH on the Portal
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	fachmesselogoa.gif 
Views:	238 
Size:	4.2 KB 
ID:	192  

Similar Threads

  1. Sydney BULKEX 2004
    By Michael Nissen in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 1
    Last Post: 21st February 2004, 8:16
  2. Queensland Mining & Engineering Exhibition (QME 2004),
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 10th November 2003, 8:30
  3. Continuous Surface Mining Symposium 2004
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 1
    Last Post: 3rd October 2003, 12:45
  4. 8th International Conference on Bulk Materials Handling - 2004
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 2nd May 2003, 8:56
  5. Powtech 2002
    By Author in forum Exhibitions, Conferences, Seminars, Courses
    Replies: 0
    Last Post: 20th February 2002, 10:19

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO