Results 1 to 1 of 1

Thread: Mass Flow Feeder

  1. #1
    Takaharu Sakata Guest

    Mass flow feeder

    Mass flow feeder from Yoshikawa Corporation, a leading feeder manufacturer in Japan.

    Our rich experience as a manufacturer in the powder and bulk solid industry since founded in 1947 has made it possible to introduce a sophisticated feeder that realizes a perfect mass flow( plug flow). Mass flow feeder with unique but simple mechanical structure promises a continuous feeding of difficult-to-handle materials like titanium dioxide, pigment , glass fiber for example with very light density, sewage sludge with high moisture of 60% , tonner with free-flowing tendency and etc., at a stable feed rate. Mass flow feeders have been applied in a various industrial areas including chemical, food,pharmaceutical, recyling, environmental and etc., realizing more than 5,000 applications up to today.
    Various specifications are possible with Mass flow feeder like air-pressure up to 5 bars, heat-resistance up to 500 deg. C, four exaust ports, pneumatic transport, washdown, GMP, a wide range of feed rate possible with 1:30, high accuracy and etc.,

    For more information on Mass flow feeder, please visit our webiste at the following address.
    Takaharu Sakata
    Yoshikawa Corporation of CIRCLE FEEDER, TM & PAT.,JAPAN
    360-31 Minato-cho, Sendai City,
    Kagoshima Pref., 899-1924
    Japan
    http://www.circlefeeder.com
    http://www55.tok2.com/home/circlefeeder/
    e-mail sakata@yoshikawa-cf.co.jp
    Tel: 81-996-26-3388
    Fax:81-996-26-3688
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	mass flow feeder.jpg 
Views:	179 
Size:	12.2 KB 
ID:	190  

Similar Threads

  1. Literature on Powder Flow
    By Alessandro Castelli in forum General Aspects
    Replies: 4
    Last Post: 2nd May 2008, 4:17
  2. Measuring Moisture in a Flow of Granular Material
    By eric sandel in forum General Aspects
    Replies: 3
    Last Post: 15th December 2004, 11:07
  3. measuring flow rates of airborne straw
    By eric sandel in forum General Aspects
    Replies: 1
    Last Post: 10th November 2000, 14:52
  4. Discharge Solids mass flux ?
    By Jos M Fontanals in forum General Aspects
    Replies: 0
    Last Post: 10th November 2000, 14:28
  5. Quantifying the Flow of Granular Materials - Job
    By Dr. Jim Cain in forum General Aspects
    Replies: 0
    Last Post: 10th November 2000, 13:43

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO