Contents - powder handling & processing - Volume 14, 2002, No. 1-6

Contents of
powder handling & processing
The International Journal of Storing,
Handling & Processing Powder
Volume 14, 2002, No. 1-6
(Main Articles only)

Author Index

Adapa, P.K.
Compression Characteristics of
Fractionated Alfalfa Grinds

Baeyens, J.
The Carry-over of Catalyst from Large
Fluidized Bed Gas-catalytic Reactors

Behera, S.
Flowability Studies of Bulk Materials for
Design of Hopper Using a Jenike Shear Cell

Bektik, B.
Influences of Electrolytes on Rheological
Properties of Bentonite Dispersions

Berg, J. van den
New Developments in Conical Screw Blenders

Berg, J. van den
A Case Study on the Prevention of Segregation Caused
by Uncontrolled Agglomeration During the Drying of a
Pharmaceutical Powder in a Bolz-Summix Conical
Screw Dryer

Cain, J.
An Alternative Technique for Determining ANSI/CEMA
Standard 550 Flowability Ratings for Granular Materials

Chil, E.
Loading / Unloading & In-line Mass Flow Measurement
of Bulk Materials A Common Problem

Das, S.
Flowability Studies of Bulk Materials for Design of Hop-
per Using a Jenike Shear Cell

Dec, R.T.
Optimization and Control of Roller Press Operating
Parameters

Dietzel, H.
Roll-Press Briquetting Helps General Electric Glass Plant
Simplify Recycling of Furnace Flue Gas Precipitator

Ernst, R.
Conveying Capacity Increased: High-capacity Rotary
Valves for Pneumatic Conveying Systems

Farnish, R.
Multiplication and Division for Engineers: Increasing the
Number of Product Streams from Vessels

Feyerherd, J.
Report on Formula Milk: Only the Best for our little Ones

Gajewski, W.
Thermal Fragmentation of Coal Particles

Galk, J.
ICM - A Grinding and Classifying Unit for Narrow Particle
Size Distributions

Golman, B.
Segregation Pattern of Multi-Component Particles of Dif-
ferent Densities During the Filling of a Vessel

Gngr, N.
Influences of Electrolytes on Rheological Properties of
Bentonite Dispersions

Gutmann, K.H.
Explosion Protection in Europe, Today and Tomorrow

Hatvani, Z.
Flowability Studies of Bulk Materials for Design of
Hopper Using a Jenike Shear Cell

Hess, W. F.
Evaluation and Representation of Particle Size Distri-
butions Summarisation of the actual state-of-the-art
technology and suggestion for an accurate representa-
tion relating to every day practice

Isci, S.
Influences of Electrolytes on Rheological Properties of
Bentonite Dispersions

Jacob, H.-J.
Mixing, Dispersing and Powder Wetting Technology

Jones, M.G.
Towards the Control of Slug Formation in Low-velocity
Pneumatic Conveying

Kent, M.
Mixer Selection An Aid to those involved in the Selec-
tion, Specification and Purchasing of Mixing Machines

Komarek, R.
Roll-Press Briquetting Helps General Electric Glass Plant
Simplify Recycling of Furnace Flue Gas Precipitator

Kosowska, M.
Thermal Fragmentation of Coal Particles

Leentvaar, L.
Drying of Pigments and Dye Stuffs with the
Micron DMR Drymeister

Li, J.
Towards the Control of Slug Formation in Low-velocity
Pneumatic Conveying

Mak, B.
One Step from Liquids to Granules: Spray drying/
granulation with the Agglomaster, type AGM-SD

McLeish, A.
The Power Of The Press Press Agglomeration to
Improve the Processing of Pharmaceuticals

McLeish, A.
Briquetting's more than Brute Force

Mitsui, T.
Segregation Pattern of Multi-Component Particles of
Different Densities During the Filling of a Vessel

Negrini, D.
Mixer Selection for Powders

Ochkov, V.
Critical Velocity in Magnetic-Filter Cleaning Process:
Limitations for Filtration Speed

zcelik, S.
Influences of Electrolytes on Rheological Properties of
Bentonite Dispersions

Otwinowski, H.
Thermal Fragmentation of Coal Particles

Pahl, M.H.
Flowability Studies of Bulk Materials for Design of Hopper Using a Jenike Shear Cell

Pandiella, S.S.
Towards the Control of Slug Formation in Low-velocity
Pneumatic Conveying

Parish, C.
Automated Line Provides Sanitary Filling of Bulk Bags
with Coffee Creamer Powder

Parish, C.
Automation Boosts Milk Preparation by 50 % in
Margarine Process

Parish, C.
Switch from 20kg Bags to 1 t FIBCs Required a
Radical Re-think for a Powder Processor

Passerini, M.
Mixer Selection for Powders

Ramme, Th.
Powder Conveying and Weighing with one Unit
A useful extension for Vacuum Conveying System

Ramponi, S.
Mixer Selection for Powders

Ray, M.S.
Selected Particulate Processes -
A Bibliographical Update (2001)

Reiser, W.
Network Control of Production Sequences

Saccani, C.
Critical Velocity in Magnetic-Filter Cleaning Process:
Limitations for Filtration Speed

Sanduliak, A.
Critical Velocity in Magnetic-Filter Cleaning Process:
Limitations for Filtration Speed

Schildermans, I.
The Carry-over of Catalyst from Large Fluidized Bed
Gas-catalytic Reactors

Schoenau, G.J.
Compression Characteristics of Fractionated
Alfalfa Grinds

Scholz, P.
Sack Closure: Trends and New Developments

Shinohara, K.
Segregation Pattern of Multi-Component Particles of
Different Densities During the Filling of a Vessel

Singer, T.
Pneumatic Conveying in a Closed-loop System

Smewing, J.
Handling the Powder Problem

Tejchman, J.
FE-Simulations of a Direct and a True Simple Shear Test

Tabil, L.G.
Compression Characteristics of Fractionated
Alfalfa Grinds

Yan, Y.
Guide to the Flow Measurement of Particulate Solids in Pipelines
- Part 2: Utilisation in Pneumatic Conveying and Emission Monitoring

Subscription prices (incl. postage) are:

Volume 15, 2003, No. 1-6,
Euro 240.00 or
US$ 294.00

If you are not yet familiar with this worldwide leading technical
journal, please ask for a free sample copy by visiting

http://www.bulk-online.com/samplecopy/samplecopy.php