Results 1 to 3 of 3

Thread: Course on Quality Control & Powder Technology

  1. course quality control and powder technology

    IPT
    SINCE 1974 SERVING THE WORLD

    QUALITY CONTROL
    AND POWDER TECHNOLOGY

    5-7 November 2003
    Delft - Netherlands

    SPONSOR:
    IPT-Industrial Powder Technology-Vaduz

    Delft University of Technology
    Faculty of design, Engineering & production
    Transport and Logistic Technology


    CHAIRMAN: Dr Ir. I A S Z Peschl
    Prof. Dr. Ir. G. Lodewijks

    1st DAY

    INTRODUCTION
    A. POWDER TECHNOLOGY
    B. MEASUREMENT OF POWDER PROPERTIES

    2nd DAY

    C. QUALITY CONTROL - ON LINEN AND IN LABORATORY

    3rd DAY

    SEGREGATION
    AND DEGRADATION
    DUST: PROBLEMS AND SOLUTIONS

    Consult our website: WWW.IPT-ONLINE.COM
    http://edir.bulk-online.com/oldedirredirect/16199.htm

    A. INTRODUCTION TO POWDER TECHNOLOGY

    This course introduces participants to the main material properties, such as:
    Internal friction, cohesion, compressive strength, flushing, etc.
    A survey will be given of existing testing methods, the relationship between problems in process and measured results.

    Automatic and manual testing equipment will be demonstrated:
    Shear tester RO-200 AUTOMATIC
    Quality control tester RO-200 QC
    Compressive strength tester TR-100
    Automatic Time consolidation tester
    De-aeration tester AERO-100

    The relationship between powders and the functioning of industrial devices and processes or plants will be explained for various industrial situations, such as: Flow pattern of silos; funnel-flow, mass-flow, ideal-flow, pressure on silo walls, choice of discharge equipment and their influences on the functioning of silos as well as arching, rat- ```````````````````````````````````````holing and flushing

    The objective
    of this course is to provide the participants with the knowledge needed to evaluate existing or projected installations, to identify possible problems and to decide on appropriate actions.

    Required knowledge:
    elementary mechanics and mathematics.

    B. MEASUREMENT OF POWDER PROPERTIES

    Basic powder properties will be measured by each participant:
    internal angle of friction, wall friction, and density.
    The more time consuming measurements, such as time consolidation and direct measurement of compressive strength, will be carried out in groups with the assistance of our staff.
    Special measurements, such as DE-AERATION test, will be carried out in groups, whereby the participants will prepare the samples and perform the measurement.

    Available equipment:
    RO-200 AUTOMATIC
    RO-200 QC
    RO-200 LOCO
    RO-200 SEMI-AUTOMATIC
    RO-200 MANUAL
    De-aeration tester AERO-100

    The objective
    of this section is to introduce the participants to the major powder properties, to carry our various tests and establish the criteria for the selection of practical methods of measurements for existing circumstances.
    Required knowledge: none

    C. QUALITY CONTROL
    Measurement of powder properties, specially developed for production control and for monitoring production processes. Process variables effecting powder properties will be explained with practical examples. Major variables are : temperature, humidity, re-crystallization, particle size distribution, powder mixtures.
    The objective of this section is to introduce the production engineer to the various methods available to him for controlling a production process, to keep powder properties within specified limits and to take appropriate action in order to achieve the required product specifications.

    Required knowledge:
    introduction to powder technology.

    D. BLENDING, DEGRADATION, SEGREGATION, DUST PROBLEMS AND their SOLUTIONS
    This course will include introduction to mixing problems, such as multi-component mixing, equalizing of product quality, small component mixing, mixing of small and large quantities. Vertical and horizontal segregation will be explained and methods to avoid them will be discussed. The methods to avoid or minimize degradation will be discussed for small and large batches. Special attention will be given to the compaction and the time consolidation, also the methods for avoiding them.
    The special requirements for handling of fine powders will be discussed as well as dust problems and solutions for dealing with them.

    Objective: A theoretical and practical background for solving various mixing problems.

    Required knowledge: Introduction to powder technology


    REGISTRATION FORM FOR SEMINAR AND HOTEL RESERVATION
    LOCATION FOR COURSE AND HOTEL WILL BE KNOWN AFTER REGISTRATION
    DEADLINE FOR REGISTRATION 15 0ctober 2003
    DEADLINE FOR CANCELLATION 1 October 2003
    ----------------------------------
    3-DAY COURSE FEE 1.000 / PERSON ( $= )
    reduced price for universities and students is 200
    INCLUDING SEMINAR PAPERS AND CERTIFICATE

    HOTEL RESERVATION - APPROX. PRICES
    Hotel room - single : 100
    Hotel room - double : 110

    ARRIVAL ..................DEPARTURE.................
    CONTACT PERSON
    COMPANY :
    ADDRESS : PHONE :
    ZIP CODE : FAX :
    CITY : e-mail :
    STATE :

  2. #2
    Join Date
    Jul 03
    Posts
    2

    Seminar Termine

    Ich habe auf Umwegen von Ihrem Seminar erfahren. Anscheinend bin ich leider noch nicht in Ihrer Mailinglist aufgenommen. Leider bin ich zum nchsten Termin verhindert wrde mich aber fr weitere Termine interessieren.

  3. NEW TERM FOR SEMINAR

    WE HAVE PUT ON OUR MAILING LIST. THE NEXT SEMINAR SILL BE NEXT YEAR IN MAY. WE WILL KEEP YPU INFORMED AS SONE THE DATE IS KNOWN.

    BEST REGARDS

    R. WOHLWEND

Similar Threads

  1. Book on Belt Conveyor Technology
    By I G Mulani in forum Publications, Standards, Patents, Catalogs
    Replies: 1
    Last Post: 22nd November 2000, 10:46
  2. Belt Conveyor Technology - I/2000 Vols I - III
    By Author in forum Publications, Standards, Patents, Catalogs
    Replies: 1
    Last Post: 22nd November 2000, 10:20
  3. Mining Technology Research Chair
    By Jane Djivre in forum Representatives & Distributors
    Replies: 0
    Last Post: 20th November 2000, 9:24
  4. Book on Belt Conveyor Technology
    By I G Mulani in forum General Aspects
    Replies: 0
    Last Post: 13th November 2000, 14:44
  5. Conveyor Belt Technology book
    By I G Mulani in forum General Aspects
    Replies: 1
    Last Post: 13th November 2000, 14:20

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO