Results 1 to 3 of 3

Thread: Fine Milling of Ammonium Sulphate

  1. #1
    marestra Guest

    fine milling of ammonium sulphate

    I need to reduce 20 ton / day of ammonium sulphate granulate, 0.5 to 3 mm size, to a fine powder passing 98% through 200 mesh .
    What type of mill would give the lowest cost/ton ratio in terms of energy and labor input .
    A classifing mill is desirable to avoid subsequent processing.

  2. Thumbs up Fine Milling of Ammonium Suphate

    As you have already hinted at generally an Air Classifier mill is the most energy efficient technique. It also gives you a simple, one system, one pass process to produce a consistent particle size distribution.

    There are several companies who can supply such milling systems. if you need any advise on who to approach please contact me by email.

  3. #3
    R. Schatz - G&A Industrieanlagen, Germany Guest
    Dear Sir

    Our G&A AIRMILL is suitable to grind ammoniumsulphate in a single step to a fineness of 98% less than 200 micron or even finer.
    A classifier is not necessary.
    With the AIRMILL technology a classifier is not required
    - lower investment costs
    - less wear (no recirculation)

    Please contact

    G&A PROTEC GmbH
    - Rolf Schatz -
    e-mail: rolf.schatz@gutes-aufbereiten.de

Similar Threads

  1. Milling of Dry Organic Solids
    By David Cohen in forum Size Reduction & Comminution
    Replies: 4
    Last Post: 2nd July 2003, 18:46
  2. Fine glass beads wanted
    By xinlu in forum Sampling, Inspection & Statistics
    Replies: 2
    Last Post: 4th December 2002, 13:42
  3. Ultra Fine Milling of Polymer Powders
    By John Richards in forum Powder Processing
    Replies: 3
    Last Post: 21st October 2002, 10:30
  4. Fine Screening Equipment
    By Pete Hoffmann - fsishakers.com in forum Powder Processing
    Replies: 1
    Last Post: 21st October 2002, 2:00
  5. Fine screening equipment
    By Pete Hoffmann - fsishakers.com in forum Used & Refurbished Equipment
    Replies: 0
    Last Post: 1st August 2002, 22:46

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO