Results 1 to 6 of 6

Thread: Enduride Idlers

  1. #1

    Enduride Idlers

    I am trying to find info on Enduride conveyor idlers.

    Does anyone have any experience using these idlers?


    Thanks

    Gary Blenkhorn

  2. Endurde Idlers

    Gary Blenkhorn

    The idler name ' Enduride' mention by you seems to be typical brand name for marketing. Please describe in few sentences its features or speciality for enabling to respond your query.

    Regards,
    Ishwar G Mulani - Book Author - Engineering Science and Application Design for belt conveyors.
    Email ID: parimul@pn2.vsnl.net.in

  3. #3
    I have found their website but I do not know much about them. I was wondering if anyone has any experience with them.


    http://www.enduride.net/homeanglais.htm


    They state the following and it sounds interesting .

    "The Enduride system has two unique features. First, it completely isolates the bearing system from any external contact, second it provides additional protection against vibration, a frequent source of conveyor breakdown. System components are factory-sealed with polyurethane injected under controlled pressure, creating an additional protective barrier and a highly effective vibration damper. The Enduride roll's exclusive encasement protection system creates a barrier between the bearing system and external environment."

    Gary Blenkhorn

  4. #4
    Lawrence K. Nordell

    Lawrence K. Nordell

    President and CEO

    Conveyor Dynamics Inc. [eDir]

    Conveyor Dynamics Inc.

    Professional Experience 57 Years / 11 Month Lawrence K. Nordell has 57 Years and 11 Month professional experience

    Discussions 2608 Lawrence K. Nordell acceded to 2608 discussions, Articles 0 Lawrence K. Nordell wrote 0 articles, Publications 0 Lawrence K. Nordell Nordell released 0 publications

    Searching nothing specified

    Know-How Design (1521) Lawrence K. Nordell used this tag 1521 times, Pipe Conveyor (238) Lawrence K. Nordell used this tag 238 times, Chutes (119) Lawrence K. Nordell used this tag 119 times

    Dear Sir,

    Plastic or polymer based idler rolls have been around for a long time.

    I can recommend one manufacturer with 20 years experience in this area: Melco Conveyor or Mining Equipment in South Africa with contacts:

    website www.melcoconveyors.com
    or http://www.melco.co.za/

    Mr. Adi Frittella Sales Manager
    Frittella email adif@melco.co.za
    Frittella cellular 011-27-82-458-3711

    Rise-Louise used to make a plastic roll. I am not sure of their present status.

    Doesn't Jim Way Enterprises advertise to make plastic rollers?
    You can find them in the forum directory.

    I looked at the website of Enduride. I understand the concept of the sealant. It may be as professed. However, the isolation rubber/polymer must deflect to be effective which implies it will heat up, consume power, and mishapen under significant impact. What about the added degrees freedom to manufacture and the resulting increase in rolling tolerance error?

    I would have to hear testimony on its effectiveness in field performance and capital cost.

    Where does it gain significant benefit over other polymer rolls?

    Lawrence Nordell
    Conveyor Dynamics, Inc.
    www.conveyor-dynamics.com

  5. #5
    Enduride - Canada Guest

    Enduride conveyor rollers

    Dear Sir,

    I would like to clarify some things avout the Enduride conveyor rollers.

    Enduride is not a marketing name but the name of our company as well as the tradename for our rollers.

    Enduride rollers are not PVC rollers (although they can be made in PVC if required by the application and by the customer), and this is certainly not what caracterizes our rollers.

    The main caracteristic about our rollers is their patented EPS (Encasement Protection System) that provides top protection for the bearings like nothing else on the market.

    Enduride rollers are also different and better then any other rollers because of their unique design, which allows us to make them "custom made" to resolve most of the conveyor problems.

    We are not afraid to ask a client what is his problem(s) with his conveyor (contamination? corrosion? build up? vibration? noise? etc). This is why we called them The Enduride Solution.

    I invite you to visit our web site www.enduride.net to find out more about Enduride.

    Best regards,

    Natasha Deshaies eng.

  6. We have a complete range of steel and poly type idlers which we have designed, manufactured and supplied into 53 countries over 33 years. Please visit our website at www.melcoconveyors.com <http://www.melcoconveyors.com>. We would pleased to receive your specific enquiry.

    Regards,
    Adriano (Adi) Frittella

Similar Threads

  1. Balancing of Idlers
    By baskar in forum Trough Belt Conveying
    Replies: 7
    Last Post: 30th November 2003, 18:30
  2. Life-sealed Idlers with Taper Roller Bearings
    By baskar in forum Trough Belt Conveying
    Replies: 8
    Last Post: 31st October 2003, 5:06
  3. Custom Conveyor Idlers
    By Antonio Reis / Vitrom in forum Mechanical Conveying
    Replies: 8
    Last Post: 24th February 2003, 14:56
  4. Impact Idlers vs. Impact Bars
    By AFM Industries in forum Trough Belt Conveying
    Replies: 25
    Last Post: 22nd February 2003, 22:49
  5. Taper Roller Vs. Deep Groove Ball Bearings in Idlers
    By baskar in forum Trough Belt Conveying
    Replies: 1
    Last Post: 30th November 2001, 2:47

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO