Results 1 to 6 of 6

Thread: Moisture Analyzer

  1. Moisture Analyzer

    Please advise the methods of continous measurement of material like bagasse, husk etc.,on belt conveyors.

    Are there equipmet which are relaiable and if so under what conditions.?

    KS Dilip

  2. #2
    Dscher Guest
    Dear Mr Dilip,

    Dscher & Dscher (Hamburg, Germany) have developed a microwave-based moisture measurement technology that allows for fast and precise measurements in the product stream. The method is particularly suited for all natural materials - such as bagasse and husk. The method enables reliable and reproducible measurements independent of density, colour and structure of the product.
    Probes, which are insensitive to contamination, can easily be integrated into conveyer belt systems.
    Our experience with bagasse is in dried materials with moisture contents of up to 18 %.
    For further information, check out our website at www.doescher.com. To supply you with more details, it would be helpful for us to know what sort of moisture ranges you would want to measure. In case you are interested in any of our products you could also contact our representative in India.

    Best Regards,

    Jrn Dscher
    Dscher & Dscher, Hamburg, Germany

  3. #3

    try this one

    check this site for Moisture Analyzer information

  4. RE: Particle size analyzers

    Dear Mr. Dilip,

    WipWare supplies particle size analysis systems for conveyor belts regardless of size, speed or size of material. The pioneer of photoanalysis technology, WipWare products provide a much more accurate sieving procedure, a continuous monitoring of material passing, and instant sieve results. Visit www.wipware.com, or contact Mark- mark.wagner@wipware.com for more information. These photoanalysis systems are being used above and below ground and can withstand some of the harshest industry conditions. I am interested in hearing about your specific operation.
    WipWare is the global leader in photoanalysis technology.

    If moisture analysis is what you are looking for, I would recommend using MoistScan products. If you are located in Canada, contact Thomas Palangio for more information on MoistScan products. If your operation is located outside of Canada, contact Gary France at Callidan headquarters in Australia for further information. Once again, these moisture analyzers are extremely effective and can work in almost any condition. www.bonfieldgroup.com, www.callidan.com
    Callidan supplies a wide range of moisture analyzers, including Microwave systems that offer exceptional results.

    Best regards,

    Mark Wagner
    WipWare Inc

    T:1-705-472-2664
    F:1-705-472-2645
    mark.wagner@wipware.com

  5. #5

    On-line Moisture Analyzer

    Dear Mr. Dilip,

    Sensortech Systems, Inc. and its NIR division, MoistTech offer a series of on-line moisture analyzers widely used in the sugar industry. These analyzers provide real-time non-destructive monitoring of products on conveyors, chutes, bins etc... Please contact me at colin@sensortech.com or visit our website at www.moisttech.com and I will be happy to provide you with further information.

    Best regards,

    Colin Hanson
    1-805-378-1160
    Attached Files Attached Files

  6. #6
    alexjoan Guest
    MoistTech is very experienced with bagasse moisture requirements in the production of bagasse. their sensor calibrations, measurement wavelengths, algorithms and sensor optical requirements are pre-set at the factory. Typical accuracy is about 0.1% moisture. Typical analog range is 0-10% moisture and up to as much as 40%, subject to application. The outputs can be adjusted to optimize PLC or recording requirements.

Similar Threads

  1. Measuring Moisture in a Flow of Granular Material
    By eric sandel in forum General Aspects
    Replies: 3
    Last Post: 15th December 2004, 12:07
  2. On-line Moisture Measurement
    By Gabe Cote in forum General Aspects
    Replies: 9
    Last Post: 12th December 2000, 20:43
  3. Moisture Content in Stored Potash Piles
    By Edwin A. Arinze in forum General Aspects
    Replies: 0
    Last Post: 21st November 2000, 16:34
  4. Flow Moisture Point
    By Juan Pablo Andrade H. in forum General Aspects
    Replies: 0
    Last Post: 13th November 2000, 15:56
  5. Moisture transfer in dryeration
    By Jose M. Risso in forum General Aspects
    Replies: 1
    Last Post: 10th November 2000, 14:32

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO