2nd December 2002, 7:41
Screw Conveyor Requirement
We are in Titanium Dioxide manufacturing in Malaysia and belong to the Huntsman Group.
We are looking for two (2) screw conveyors for a new project.
Can you suggest a few vendors who have office / representatives in Malaysia.
2nd December 2002, 15:27
We can design and manufacture the screw conveyors for your application. We have manufactured screw conveyors of capacity from 10TPH to 300 TPH of lengths from 2m to 11m (without hanger bearings) for cement and similar applications.
We are also familiar with the difficult flow properties of TiO2.
We can have our Malaysian representative contact you if you are interested.
Please visit our website www.scorpioengg.com
4th December 2002, 5:10
We offer complete range of bulk material handling products including belt conveyors, screw conveyors, bucket elevators, drag chain conveyors, feeders etc.
We would be keen to work with you and shall respond to your queries.
Tecpro Systems (P) Ltd
Unit 2, First Floor,
25, Gandhinagar First Main Road
Ph: +91 44 442 5965/ 442 6027/ 442 5886
Fax: +91 44 442 5922
7th December 2002, 7:51
Please contact " Flow Force Sdn Bhd"- Malaysia
Ph. 03- 7956 6529
Fx. 03 - 79566721
10th December 2002, 10:32
we can assist you with surplus process equipment.
please register for FREE use in www.allsurplusworld.com
also check out:
Hans Kwist - Director
8th January 2003, 12:56
TiO2 Screw Conveyors
Details of requirements to email@example.com will receive an evaluation report and notes on the application. Ajax has supplied various feeders and conveyors for TiO2 and has considerable experience in dealing with such cohesive products.
10th January 2003, 1:58
refer to your requirement, would appreciate you could provide more information e.g. capacity etc..
GPM (SEA) Pte Ltd
13 Lor 8 Toa Payoh #06-04
Tel: (02) 6352 4494
Fax: (02) 6356 4494
10th January 2003, 2:09
Screw Conveyor Requirement
Dear Mr. Sheshadri
We are an engineering company, specialise in design, fabricate, install and commission of industrial conveying systems and technologies. We are based in Malaysia.
We have dealt with Mr. Achuthan Menon of Tioxide before for supply and install of conveyor belt last year. Therefore, we know a little bit about your company.
Kindly contact us or you could visit us at www.tecgates.com.my.
Thank you and best regards.
J. L. CHONG
TECGATES ENGINEERING (M) SDN BHD
No. 36, Jalan PJS 11/8, Bandar Sunway Industrial Park, 46150 Bandar Sunway, Selangor, Malaysia.
Tel: +60-(0)3-5621 9088
Fax: +60-(0)3-5621 2899
H/P: +60-(0)12-376 6282
14th January 2003, 18:15
We are one of leading manufacturers of bulk handling equipments including conveyor systems,storage silo aeration and extraction system,Blending silos,Single shaft mixers,Twin shaft blenders,Jumbo bag filling and unloading machines etc.Please send your enquiry on following address.
SANGHAVI ENGINEERING(BULK HANDLING DIVISION)
17th April 2003, 21:55
Asia Pacific Conveyors is an engineering company specialising in the design and fabrication of material handling equipment. We are based in Singapore.
Please forward more details to us via fax or email.
Thank you and Best Regards.
Asia Pacific Conveyors
15 Benoi Place. Singapore 629933
Tel: +65 - 6861 6809
Fax: +65 - 6862 4246
Email : firstname.lastname@example.org
By Utkarsha Joshi in forum General Aspects
Last Post: 28th March 2004, 22:27
By Tony Riotto in forum General Aspects
Last Post: 10th November 2000, 15:50
By Intern. Bulk Systems in forum General Aspects
Last Post: 10th November 2000, 14:33
By Mark Fernie in forum General Aspects
Last Post: 10th November 2000, 14:04
By Dragan Marijan in forum General Aspects
Last Post: 10th November 2000, 7:50
Tags for this Thread
Single Sign On provided by vBSSO