Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Crusher Required

  1. Crusher Required

    We require a Large Twin Roll Crusher for use with overburden
    in open cast coal mine .machine to handle 2000-3000 cubic meters of material per hour with maximum lump size 1.5m cube
    MMD or like machine prefered

  2. #2
    kathy Guest
    AMERICAN PULVERIZER COMPANY has been in business since 1908, and since this time, has designed and manufactured many different types of crushers and shredders necessary to meet varied specifications.

    We have a wide assortment of standard models as well as the ability to custom-design a unit when necessary. We manufacture both the high-speed hammermill/Ringmill type crushers and the slow-speed, high torque, shear-type waste shredders; along with plastic Granulators, aluminum shredders, wood hogs, and many other types of heavy-duty reduction equipment.

    We would also like you to know AMERICAN PULVERIZER COMPANY has a fully-staffed office of service personnel and engineers to help you with any questions that may arise before, during, or after the machine is installed. We stock approximately $2,000,000 worth of inventory to serve your immediate needs.

    We also have a wholly owned subsidiary HUSTLER CONVEYOR COMPANY, also located here in St. Louis, Missouri that manufactures Rubber Belt, Steel Belt and Oscillating Conveyors and together we can put together a completely integrated system with a single source of supply and responsibility.

    Prior to sizing you on a piece of reduction equipment, we need to know the following:

    1. Capacity in pounds or tons per hour.
    2. The type of material to be reduced.
    3. Average infeed size and the largest infeed size and end product size.
    4. Any physical or chemical properties of the material to be reduced.

    We are pleased to enclose this preliminary information and welcome any questions or comments that you may have. For more information our web site is located at: http://www.ampulverizer.com. We look forward to further discussions concerning your application, as we remain,

    Very truly yours,
    AMERICAN PULVERIZER COMPANY



    James Holder, Sales Engineer
    JH/kr

  3. #3

    Crusher

    Dear Sir,
    We BHP Engineers Ltd, Leading player in the field of crushing and screening plants in india. We caters to Indian market, in collaboration with TEREX INFRASTRUCTURE Companies, USA. Our product range includes Jaw Crushers, Roller Cone Crushers. Vertical Shaft Impactors, Primary, Secondary
    and tertiary mobile plants ( Tyre mounted) and Stationery Crushing and Screening Plants.

    We would like to quote for your requirmnets. hence please provide us more details in this matter.

    With regsrds,

    W D'mello
    Asst Mgr - Mktg
    BHP Engineers Ltd.
    Mumbai
    bhpbom@vsnl.com

  4. Dear Simon Pearson,

    It is better if you mention product size of the crusher, which equally affects the crusher size & available models.

    It is also necessary to mention brief characteristics of overburden i.e. what kind of earth / material it is.

    Regards,
    Ishwar G Mulani.
    Author of Book : Engineering Science and Application Design for Belt Conveyors.
    Email : parimul@pn2.vsnl.net.in

  5. Roll Crusher

    The Roll Crusher in question should give a finished product size of about -300mm or 12" With max infeed of 1.5m cube with a tonnage between 2-3000cube meters per hour. The material being processed is Mud Stone Overburden

  6. #6
    kathy Guest

    Crusher

    Gentlemen,

    If you would like for us to quote you on this project, please contact us direct at jholder@ampulverizer.com.

    We have equipment that will fit your needs, as we remain,

    Very truly yours,
    American Pulverizer

    James Holder

  7. #7
    Join Date
    Jun 03
    Posts
    24

    Crusher

    Clemro Western Ltd. is Canada's leading manufacturer of aggregate and mining equipment. We manufacture jaw crushers, cone crushers, incline and horizontal screens, vibratory feeders, radial stackers, conveyors, custom built plants, etc...

    Please send more detailed info on your requirements, including product density, tons per hour, moisture content, operating temperatures, etc...

    I look forward to your reply. Please contact me at brentw@clemro.com .

    Regards,

    Brent Wheeliker
    Sales Manager

  8. #8
    Join Date
    Jun 03
    Posts
    24

    Crusher

    I have attached some product information to give a better understanding of Clemro manufacured equipment.
    I look forward to your feed-back.

    Regards,
    Brent Wheeliker
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	psi xc 1400.jpg 
Views:	557 
Size:	229.6 KB 
ID:	154  

  9. Dear Simon Pearson,

    The crusher required by you is of big size but not of exceptional size. This is due to reason that product size is also big. The two-roll crusher may have roll size around dia 2 m x 1.8 m length. Please note that this is just approximation as it depends on the actual characteristics of the overburden.

    You can contact owners and suppliers for lignite open cast mines and coal mines, to know about the possible suppliers.

    As a rule, I do not indicate the name of suppliers in forum. However, as I know, a German company has supplied few units of two-roll crusher for crushing overburden in Thailand, for capacity more than 3000 mtph each.

    Regards,
    Ishwar G Mulani.
    Author of Book : Engineering Science and Application Design for Belt Conveyor.
    Email : parimul@pn2.vsnl.net.in

  10. #10
    nbritz Guest

    Re: Crusher Required

    Originally posted by simon pearson
    We require a Large Twin Roll Crusher for use with overburden
    in open cast coal mine .machine to handle 2000-3000 cubic meters of material per hour with maximum lump size 1.5m cube
    MMD or like machine prefered
    High Simon

    As I know you are working for MMD.
    What is the special need that you asking for Twin Roller??

    If you really need one, we can supply you our double roll crusher for overburden which we deliverd to Thailand some years ago.
    As you know we produce crushers since more than 50 years and we are specialized in crushing coal. We produced more than 5.000 machines so far.
    Awaiting your reply


    Thanks & Best Regards

    Norbert Britz
    Managing Director

    Aubema Maschinenfabrik
    D-51702 Bergneustadt/Germany
    Phone: +49 2261 4094 301
    Fax : +49 2261 4094 303
    mobil: +49 171 413 3458
    email: nbritz@aubema.de
    http://www.aubema.com

Page 1 of 2 12 LastLast

Similar Threads

  1. Marketing Agents or Distributors Required
    By Author in forum Representatives & Distributors
    Replies: 0
    Last Post: 12th June 2002, 15:57
  2. Crusher for White Fused Alumina
    By Author in forum New Projects, Tenders, Inquiries
    Replies: 0
    Last Post: 12th June 2002, 11:23
  3. Post Doctoral Research Fellow Required
    By Mark Kilfoil in forum Representatives & Distributors
    Replies: 0
    Last Post: 7th June 2002, 7:59
  4. Urgent info required!!!
    By bob in forum General Aspects
    Replies: 3
    Last Post: 23rd November 2000, 16:30
  5. Manufacturers of eqpt/ Sources Required
    By KS Dilip in forum New Projects, Tenders, Inquiries
    Replies: 5
    Last Post: 16th November 2000, 14:21

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO